[PROBLEM] Logitech UltraX Media Remote

[zeRo82]

First of all, just to say Hi

I have a little problem configuring above mentioned remote, so I hope that someone can help me.

My Setup:
Raspberry Pi B @ 900 MHZ
Xbian 1.0a5
Logitech UltraX Remote RF remote (link)

With this guide i get no return from mode2

lsusb

Code:

Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 004: ID 1058:1110 Western Digital Technologies, Inc.
Bus 001 Device 005: ID 046d:c101 Logitech, Inc. UltraX Media Remote

input/devices

Code:

I: Bus=0003 Vendor=046d Product=c101 Version=0110
N: Name="Logitech USB Receiver"
P: Phys=usb-bcm2708_usb-1.3/input0
S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
U: Uniq=
H: Handlers=sysrq kbd event0
B: PROP=0
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0003 Vendor=046d Product=c101 Version=0110
N: Name="Logitech USB Receiver"
P: Phys=usb-bcm2708_usb-1.3/input1
S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.1/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=100013
B: KEY=42c43b0 20d0400 0 0 0 4 1c000 31f8 d0011806 8e0440 0 0 0
B: MSC=10

I understand that remote is shown as usb keyboard, and that I need to configure lirc to recognize remote, but I don't know what exactly I need to change

thanx in advance for help