Xbian won't find SSID *NO INTERNET*
|
2nd Feb, 2017, 06:10 AM
Post: #16
|
|||
|
|||
RE: Xbian won't find SSID *NO INTERNET*
Ah, I suppose I know where the culprit is:
RPi3's onboard WLAN interface requires crda package to work properly with channel 13 (usually I do not use the onboard WLAN) Please install crda package (it is currently not installed per default) and after that run commands as follows: Terminal root@kmxbilr2 / # iwlist wlan0 scanning | grep Channel Channel:1 Frequency:2.412 GHz (Channel 1) Channel:1 Frequency:2.412 GHz (Channel 1) Channel:1 Frequency:2.412 GHz (Channel 1) Channel:11 Frequency:2.462 GHz (Channel 11) Channel:11 Frequency:2.462 GHz (Channel 11) Channel:4 Frequency:2.427 GHz (Channel 4) root@kmxbilr2 / # iw reg set DE root@kmxbilr2 / # iwlist wlan0 scanning | grep Channel Channel:1 Frequency:2.412 GHz (Channel 1) Channel:1 Frequency:2.412 GHz (Channel 1) Channel:11 Frequency:2.462 GHz (Channel 11) Channel:11 Frequency:2.462 GHz (Channel 11) Channel:4 Frequency:2.427 GHz (Channel 4) Channel:13 Frequency:2.472 GHz (Channel 13) You see after setting REGDOMAIN to DE channel 13 is there ![]() To make setting permanent please set variable REGDOMAIN to DE in file /etc/default/crda: Terminal root@kmxbilr2 ~ # cat /etc/default/crda # Set REGDOMAIN to a ISO/IEC 3166-1 alpha2 country code so that iw(8) may set # the initial regulatory domain setting for IEEE 802.11 devices which operate # on this system. # # Governments assert the right to regulate usage of radio spectrum within # their respective territories so make sure you select a ISO/IEC 3166-1 alpha2 # country code suitable for your location or you may infringe on local # legislature. See `/usr/share/zoneinfo/zone.tab' for a table of timezone # descriptions containing ISO/IEC 3166-1 alpha2 country codes. REGDOMAIN=DE |
|||
« Next Oldest | Next Newest »
|