Threaded Mode | Linear Mode

kevin watt · 19th Oct, 2013, 04:01 AM

xbian@xbian /etc $ cat xbian_version
1.0Beta1.1

Every time reboot, I have goto " setup-> xbian -> service -> ssh -> run " to make ssh work.

I have set /etc/rc.local

Quote:sleep 30; /etc/init.d/ssh restart

but this is not working.

I also set ssh by console.

Quote:root@xbian:~# xbian-config services status ssh
ssh 5
root@xbian:~# xbian-config services autostart ssh disable
1
root@xbian:~# xbian-config services autostart ssh enable
1

Still not working. Sad

Also I have try install openbsd-inetd and telnetd. It's not start when system boot too.

Any idea for this problem? Huh

mk01 · 19th Oct, 2013, 06:37 AM

can you send output of

Code:

sudo -i

insserv -v

?

kevin watt · 19th Oct, 2013, 07:06 AM

(19th Oct, 2013 06:37 AM)mk01 Wrote: can you send output of

Code:

sudo -i insserv -v

?

Code:

root@xbian:~# sudo -i

root@xbian:~# insserv -v

insserv: creating .depend.boot

insserv: creating .depend.start

insserv: creating .depend.stop

root@xbian:~#

Seen insserv works fine. Each file are print below.

Code:

root@xbian:~# cat /etc/init.d/.depend.boot

TARGETS = networking urandom hostname.sh checkroot-bootclean.sh mountkernfs.sh procps pppd-dns rpcbind mountdevsubfs.sh checkroot.sh kmod mtab.sh mountnfs.sh mountnfs-bootclean.sh bootmisc.sh screen-cleanup

INTERACTIVE = checkroot.sh

rpcbind: networking

mountdevsubfs.sh: mountkernfs.sh

checkroot.sh: mountdevsubfs.sh hostname.sh

kmod: checkroot.sh

mtab.sh: checkroot.sh

mountnfs.sh: networking rpcbind

mountnfs-bootclean.sh: mountnfs.sh

bootmisc.sh: checkroot-bootclean.sh mountnfs.sh mountnfs-bootclean.sh

screen-cleanup: mountnfs.sh mountnfs-bootclean.sh

root@xbian:~# cat /etc/init.d/.depend.start 

TARGETS = bootlogs killprocs motd single rpcbind ifplugd iguanaIR lirc openbsd-inetd anacron cron rsync ssh rmnologin rc.local

INTERACTIVE =

single: killprocs bootlogs motd

lirc: iguanaIR

rmnologin: ifplugd lirc iguanaIR rpcbind openbsd-inetd bootlogs motd anacron cron rsync ssh

rc.local: ifplugd lirc iguanaIR rpcbind openbsd-inetd bootlogs motd anacron cron rsync ssh

root@xbian:~# cat /etc/init.d/.depend.stop

TARGETS = urandom ifplugd lirc openbsd-inetd iguanaIR sendsigs umountnfs.sh rpcbind networking umountfs umountroot halt reboot

iguanaIR: lirc

sendsigs: ifplugd lirc iguanaIR openbsd-inetd

umountnfs.sh: ifplugd lirc iguanaIR sendsigs openbsd-inetd

rpcbind: umountnfs.sh

networking: ifplugd umountnfs.sh rpcbind

umountfs: ifplugd lirc iguanaIR umountnfs.sh networking urandom rpcbind openbsd-inetd

umountroot: umountfs

halt: umountroot

reboot: umountroot

root@xbian:~#

Thanks for you reply.

mk01 · 19th Oct, 2013, 05:49 PM

and please send :

Code:

ls -la /etc/rc2.d

kevin watt · 19th Oct, 2013, 07:06 PM

(19th Oct, 2013 05:49 PM)mk01 Wrote: and please send :

Code:

ls -la /etc/rc2.d

Looks fine. I think.

Code:

xbian@xbian ~ $ ls -la /etc/rc2.d

total 56

drwxr-xr-x 1 root root  264 Oct 19 01:54 .

drwxr-xr-x 1 root root 3036 Jan  1  1970 ..

-rw-r--r-- 1 root root  677 Jul 15 01:24 README

lrwxrwxrwx 1 root root   18 Jun 22 22:19 S01bootlogs -> ../init.d/bootlogs

lrwxrwxrwx 1 root root   14 Jun 22 22:19 S01motd -> ../init.d/motd

lrwxrwxrwx 1 root root   17 Oct 17 05:54 S04rpcbind -> ../init.d/rpcbind

lrwxrwxrwx 1 root root   17 Oct 17 01:09 S08ifplugd -> ../init.d/ifplugd

lrwxrwxrwx 1 root root   18 Oct 17 01:09 S08iguanaIR -> ../init.d/iguanaIR

lrwxrwxrwx 1 root root   17 Oct 17 01:09 S09anacron -> ../init.d/anacron

lrwxrwxrwx 1 root root   14 Oct 17 01:09 S09cron -> ../init.d/cron

lrwxrwxrwx 1 root root   14 Oct 17 01:09 S09lirc -> ../init.d/lirc

lrwxrwxrwx 1 root root   23 Oct 17 15:28 S09openbsd-inetd -> ../init.d/openbsd-inetd

lrwxrwxrwx 1 root root   15 Oct 17 01:09 S09rsync -> ../init.d/rsync

lrwxrwxrwx 1 root root   13 Oct 19 01:54 S09ssh -> ../init.d/ssh

lrwxrwxrwx 1 root root   18 Oct 18 21:32 S11rc.local -> ../init.d/rc.local

lrwxrwxrwx 1 root root   19 Oct 17 01:09 S11rmnologin -> ../init.d/rmnologin

this is process list. It seen it lost some daemon too. ex. cron

Code:

PID TTY      STAT   TIME COMMAND

    1 ?        Ss     0:04 /sbin/init

    2 ?        S      0:00 [kthreadd]

    3 ?        S      0:19 [ksoftirqd/0]

    5 ?        S<     0:00 [kworker/0:0H]

    7 ?        S<     0:00 [kworker/u:0H]

    8 ?        S      0:16 [rcu_kthread]

    9 ?        S<     0:00 [khelper]

   10 ?        S      0:00 [kdevtmpfs]

   11 ?        S<     0:00 [netns]

   12 ?        S      0:00 [bdi-default]

   13 ?        S<     0:00 [kblockd]

   14 ?        S      0:00 [khubd]

   15 ?        S      0:30 [kworker/0:1]

   16 ?        S      0:04 [kworker/u:1]

   19 ?        S      0:00 [kswapd0]

   20 ?        S      0:00 [fsnotify_mark]

   21 ?        S<     0:00 [crypto]

   27 ?        S<     3:32 [VCHIQ-0]

   28 ?        S<     0:25 [VCHIQr-0]

   29 ?        S<     0:00 [VCHIQs-0]

   30 ?        S<     0:00 [dwc_otg]

   31 ?        S<     0:00 [DWC Notificatio]

   32 ?        S<     0:00 [deferwq]

   33 ?        S      0:00 [kworker/u:2]

   40 ?        S      0:26 [mmcqd/0]

  197 ?        S      0:00 [btrfs-worker-1]

  198 ?        S      0:00 [btrfs-genwork-1]

  199 ?        S      0:00 [btrfs-submit-1]

  200 ?        S      0:00 [btrfs-delalloc-]

  201 ?        S      0:00 [btrfs-fixup-1]

  202 ?        S      0:03 [btrfs-endio-1]

  203 ?        S      0:00 [btrfs-endio-met]

  204 ?        S      0:00 [btrfs-rmw-1]

  205 ?        S      0:00 [btrfs-endio-rai]

  206 ?        S      0:00 [btrfs-endio-met]

  207 ?        S      0:01 [btrfs-endio-wri]

  208 ?        S      0:00 [btrfs-freespace]

  209 ?        S      0:00 [btrfs-delayed-m]

  210 ?        S      0:00 [btrfs-cache-1]

  211 ?        S      0:00 [btrfs-readahead]

  212 ?        S      0:00 [btrfs-flush_del]

  213 ?        S      0:00 [btrfs-cleaner]

  214 ?        S      0:00 [btrfs-transacti]

  236 ?        S      0:00 /usr/bin/splash --reopen --msgtxt=loading... --percentagebar --percentage=15

  301 ?        S<     0:00 [rpciod]

  302 ?        S<     0:00 [nfsiod]

  313 ?        S      0:00 upstart-udev-bridge --daemon

  326 ?        Ss     0:00 /sbin/udevd --daemon

  400 ?        S<     0:00 [loop0]

  416 ?        S      0:00 /sbin/udevd --daemon

  417 ?        S      0:00 /sbin/udevd --daemon

  603 ?        S      0:16 /usr/sbin/ifplugd -i eth0 -q -f -u0 -d10 -w -I

  631 ?        S      0:03 /usr/sbin/ifplugd -i lo -q -f -u0 -d10 -w -I

  646 ?        S      0:00 /usr/sbin/pppd call dsl-provider

  649 ?        S      0:00 [kworker/0:2]

  663 ?        S      0:00 upstart-socket-bridge --daemon

  685 ?        Ss     0:00 /sbin/rpcbind -w

  700 ?        Ss     0:00 /sbin/rpc.statd

  727 ?        S      0:03 /usr/sbin/ifplugd -i ppp0 -q -f -u0 -d10 -w -I

  742 ?        S      0:00 [nfsv4.0-svc]

  793 tty1     Ss+    0:00 /bin/sh -e /proc/self/fd/9

  800 tty1     S+     0:00 /bin/sh /etc/init.d/rc S

  824 tty1     SL+    0:00 startpar -p 4 -t 20 -T 3 -M boot -P N -R S

  854 ?        S<l  146:22 /usr/local/lib/xbmc/xbmc.bin --standalone

  962 ?        S      0:00 [VCHIQka-0]

  990 ?        Ss     0:05 /usr/sbin/ntpd -p /var/run/ntpd.pid -u 102:104

 1018 ?        S<     0:00 [krfcommd]

 4008 ?        S<s    0:00 /usr/sbin/sshd

 4171 ?        S      0:00 [flush-btrfs-1]

 4188 ?        S<s    0:00 sshd: xbian [priv]

 4192 ?        S<     0:00 sshd: xbian@pts/0

 4193 pts/0    S<s    0:00 -bash

 4219 ?        S      0:00 [flush-179:0]

 4220 ?        S      0:00 [flush-0:27]

 4238 pts/0    R<+    0:00 ps ax

This RPi is type B with Samsung chipset.

Also, I have been set the /etc/network/interfaces manual. would this cause any problem?

Code:

auto lo

iface lo inet loopback

#iface eth0 inet dhcp

allow-hotplug wlan0

iface wlan0 inet manual

wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf

wireless-power off

iface default inet dhcp

auto dsl-provider

iface dsl-provider inet ppp

pre-up /sbin/ifconfig eth0 up 

provider dsl-provider

auto eth0

iface eth0 inet static

address 192.168.1.11

netmask 255.255.255.0

dns-nameservers 8.8.8.8 8.8.4.4

siklosi · 21st Oct, 2013, 05:05 AM

Hi,
I have same problem. I thought that problem is my strange configuration and tried reinstaling everything but without success (same problem occured). Finaly I made clear installation and all I did is: Install beta 1.1 on SD, apt-get update, apt-get upgrade, installed developement apache and transmission through xbian-configure and afther reboot apache, transmission, ssh, Igunair, Dbus, Lirc, Avahi-Daemon cron are stopped (Xbmc and Ntp are only services that are checked for autostart that are running). If i go to xbmc-system-xbian-services those services are checked for autostart but are stopped and I can manualy start them from there. I tried unchecking autostart rebooting and checking again autostart but nothing happens I still need to manualy start them.
EDIT: runlevel says unknown

rbellamy · 22nd Oct, 2013, 07:10 AM

I'm completely confused by this as well.

Where and how does xbian/xbmc start sshd?

I've got no /etc/init.d/ssh, nor do I have it listed in /etc/init/ssh.conf to be run by upstart-job.

jideyf · 16th Dec, 2013, 08:54 PM

Hello
I have the same Problem with reboot and ssh activation
Have you found a solution ?
Thanks

mk01 · 21st Dec, 2013, 07:33 AM

sshd is started via inetd.

/etc/inetd.conf contains line:

Code:

ssh  stream  tcp  nowait  root   /usr/sbin/tcpd /usr/sbin/sshd -i

Possibly Related Threads...
Thread:		Author	Replies	Views:	Last Post
	[PROBLEM] It does not start automatically in xbmc	anakin	3	11,153	8th Apr, 2014 10:00 PM Last Post: anakin
	[SOLVED] XMBC doesn't start automatically with nfs shared configured	Lukeid	11	36,464	24th Mar, 2014 10:55 AM Last Post: mk01