New Raspberry Pi firmware & XBMC Frodo RC3
|
12th Jan, 2013, 04:09 AM
Post: #76
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
(11th Jan, 2013 11:59 AM)syd Wrote: try not grabbing it from https. Still the same...I'll try another SD Card just in case... EDIT I changed sd card and it works...untill' this message : fatal: fsync error on '/opt/xbian/.git/objects/pack/tmp_pack_KUuUic': Input/output error Any idea ? |
|||
12th Jan, 2013, 11:53 PM
Post: #77
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
Just wanted to chime in here. I have a similar setup in terms of software stack. But i do have overclock set to medium and am on the 512 b models. I do not seem to have performance issues, albeit the sickbeard site is tad slow to start and i have both sickbeard and couchpotato start with nice 19.
I have attached the couchpotato and sickbeard init.d files that i use. Hope that helps. (10th Jan, 2013 11:05 AM)endo Wrote: @Koenkk i seem to have solved my problem |
|||
13th Jan, 2013, 01:31 AM
Post: #78
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
I've actually repurposed an old laptop to serve as an NAS, a task the pi was formerly performing. With it's reduced load of tasks it seems to run better(although playback is a bit less reliable), it also eliminates the need for those packages on the pi. Thanks though
(12th Jan, 2013 11:53 PM)nyeswant Wrote: Just wanted to chime in here. I have a similar setup in terms of software stack. But i do have overclock set to medium and am on the 512 b models. I do not seem to have performance issues, albeit the sickbeard site is tad slow to start and i have both sickbeard and couchpotato start with nice 19. |
|||
14th Jan, 2013, 02:28 AM
Post: #79
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
I have tried this 3X now. After I C-n-p root@xbian:/opt/xbian# git reset --hard 50715b73e7cd3f0229569809ef3ce5b03013d533
I recieve this message fatal: Could not parse object '50715b73e7cd3f0229569809ef3ce5b03013d533'. Any ideas on how to fix this, or work around it? Thank you |
|||
14th Jan, 2013, 02:31 AM
Post: #80
|
|||
|
|||
New Raspberry Pi firmware & XBMC Frodo RC3
@Uncle_Tubbie skip the git reset --hard step, ATM it won't make a difference
Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
14th Jan, 2013, 10:35 AM
Post: #81
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
@Koenkk = thank you
|
|||
14th Jan, 2013, 10:55 AM
Post: #82
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
And ATM it does again
pilight - modular domotica solution
|
|||
15th Jan, 2013, 01:50 PM
Post: #83
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
Updated to 6cbc6d using the steps described in post #1. XBMC boots fine, but the moment I try to load system settings or play a file, the screen goes black and nothing responds.
Can still SSH in no problem. Restarting xmbc from there works, but I still can't get past the menu screen. |
|||
15th Jan, 2013, 03:49 PM
Post: #84
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
Sounds to me like XBMC is crashing.
Can you post a dmesg report? |
|||
15th Jan, 2013, 04:54 PM
Post: #85
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
Did anything change regarding memory usage? I updated following the instructions. My system is use the cmyth pvr mythtv client. It seems to work. LiveTV playback through the PVR client is smoother.
However, the system crashes often. I think it runs out of memory and goes to the black screen. I can reproduce using the following steps: 1. Reboot. 2. When xbmc starts, it will initialize the pvr stuff and start loading from the mythtv backend. 3. At the same time, access a uPNP device with a large set of subdirs. It crashes here often. |
|||
15th Jan, 2013, 05:54 PM
Post: #86
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
@monkeypet and Crashhatch, could you post your /home/xbian/.xbmc/temp/xbmc.log right after the crash?
Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
15th Jan, 2013, 09:04 PM
Post: #87
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
(15th Jan, 2013 01:50 PM)Crashthatch Wrote: Updated to 6cbc6d using the steps described in post #1. XBMC boots fine, but the moment I try to load system settings or play a file, the screen goes black and nothing responds. First time poster here. I too am having it show a black screen but mine is right away on bootup. I ssh'd in and found that xbmc.bin is not running (ps |grep xbmc.bin will show you). I then started it and got the blue screen for about 3 seconds and then got a segmentation fault. I even reflashed my card Aplha4 and then went through the steps again and got the same results. Here is the dmesg: http://pastebin.com/Bt0Z24Eu Edit by Koenkk: Please post your logs on pastebin.com and link them here. For this time I did this for you |
|||
15th Jan, 2013, 09:14 PM
Post: #88
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
@rikkards, can you please post the log on pastebin and put the link to it here.
pilight - modular domotica solution
|
|||
15th Jan, 2013, 09:42 PM
Post: #89
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
Seems that the latest XBMC isn't working well. If you are having problems replace the git reset --hard hash with 3bb844a380e93c049ff236bf59bcc6c14b5cc96b
Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
15th Jan, 2013, 10:40 PM
Post: #90
|
|||
|
|||
RE: New Raspberry Pi firmware & XBMC Frodo RC3
Hi,
I just followed these steps: Code: sudo su xbian@xbian:~/.xbmc/temp# vcgencmd version Jan 9 2013 17:27:35 Copyright © 2012 Broadcom version 361556 (release) xbian@xbian:~/.xbmc/temp# Went into XBMC -> System -> System Info Got "Black Screen of Death" (just my fancy way of saying i got black screen, but SSH is ok) xbmc log shows just this: 21:27:51 T:2950468672 ERROR: Unable to load libcurl.so.4, reason: libcurl.so.4: cannot open shared object file: No such file or directory root@xbian:/home/xbian/.xbmc/temp# find / -name libcurl.so.4 root@xbian:/home/xbian/.xbmc/temp# |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread: | Author | Replies | Views: | Last Post | |
XBMC Frodo 12.0 Final | Koenkk | 66 | 229,383 |
10th Mar, 2013 07:33 PM Last Post: tuutsie |
|
XBMC Frodo RC3 (c47e925) | Koenkk | 16 | 52,667 |
27th Feb, 2013 06:27 AM Last Post: CurlyMo |
|
XBMC Frodo RC1 | Koenkk | 26 | 78,695 |
3rd Jan, 2013 05:23 AM Last Post: brantje |