Problem: lirc, mceusb and generic HP USB IR receiver
|
7th Apr, 2014, 11:59 PM
Post: #1
|
|||
|
|||
lirc, mceusb and generic HP USB IR receiver
ok, i am at wits end with this... i have tried everything i know (and i am not new to this) and cannot get my remote to work consistently. it works most of the time in rc1, but occasionally does not - either only a few buttons work or it doesn't work at all, usually a reboot or 2 will fix it. but in staging i cannot get it to work at all. i have been through everything in THIS THREAD, as well as dozens of xbmc, openelec and lirc forums and nothing gets a response from irw or mode2.
dmesg Code: [ 22.543228] Registered IR keymap rc-rc6-mce cat /var/log/lircd Code: Apr 7 19:54:18 xbian-testing lircd: caught signal Code: xbian@xbian-testing ~ $ cat /proc/bus/input/devices Code: xbian@xbian-testing ~ $ lsusb Code: xbian@xbian-testing ~ $ lsmod i am now at the point that i am shopping for a flirc or a gpio receiver, but they are not easy to find in this part of the world, plus i know it CAN work and would like to figure it out as it may help others if we can get to the bottom of it. i suspect a conflict with ir-keytables, but documentation on the relationship between that and lirc is spotty at best. @CurlyMo, can we use this as a scenario to put together a step-by-step troubleshooting procedure that is worth adding to the wiki? after all, it ain't rocket science (or is it?). ***please click 'thanks' if I helped!*** |
|||
8th Apr, 2014, 04:40 AM
Post: #2
|
|||
|
|||
RE: lirc, mceusb and generic HP USB IR receiver
Can you unload all rc modules and just load lirc_dev and mceusb. Then restart lirc.
pilight - modular domotica solution
|
|||
8th Apr, 2014, 01:18 PM
Post: #3
|
|||
|
|||
RE: lirc, mceusb and generic HP USB IR receiver
(8th Apr, 2014 04:40 AM)CurlyMo Wrote: Can you unload all rc modules and just load lirc_dev and mceusb. Then restart lirc. done... no response ![]() ***please click 'thanks' if I helped!*** |
|||
8th Apr, 2014, 08:28 PM
Post: #4
|
|||
|
|||
Re: lirc, mceusb and generic HP USB IR receiver
Please read rules and do a search before you post! | FAQs | How to post log file? | Can't find an answer? Contact us. |
|||
9th Apr, 2014, 03:06 AM
Post: #5
|
|||
|
|||
RE: lirc, mceusb and generic HP USB IR receiver
(8th Apr, 2014 08:28 PM)f1vefour Wrote: Have a look at this thread: tried everything in that thread already, but thanks. like i said i know how to do this and NOTHING has worked. unfortunately i can't test anything tonight as my file server has died so i have to re-purpose my spare pi so my 6 year old can watch his tv. i have spent hours and days getting this to work in the past, but something new is causing all my previous configurations to fail. ***please click 'thanks' if I helped!*** |
|||
10th Apr, 2014, 01:56 AM
Post: #6
|
|||
|
|||
RE: lirc, mceusb and generic HP USB IR receiver
fyi, i checked my working rc1 build and irw returns mceusb as input device. i still suspect ir-keytables as the culprit here, but without irw working i cannot verify if devinput is taking over. any ideas?
***please click 'thanks' if I helped!*** |
|||
19th Apr, 2014, 01:23 PM
Post: #7
|
|||
|
|||
RE: lirc, mceusb and generic HP USB IR receiver
(7th Apr, 2014 11:59 PM)dharmabm Wrote: ok, i am at wits end with this... i have tried everything i know (and i am not new to this) and cannot get my remote to work consistently. @dharmabm you have loaded all kind of protocol handlers, but ... did you set LIRC handler as ACTIVE handler? ok probably this means yes Code: [ 24.196843] rc rc0: lirc_dev: driver ir-lirc-codec disable devinputs, definitely when you have ir_lirc_codec + lirc_dev + mceusb = you have to go with lircd rc_rc6_mce + ir_rc6_decoder = you go through kernel input device translated by map defined in /etc/rc_maps.cfg Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread: | Author | Replies | Views: | Last Post | |
[Howto] mceusb driver with lirc protocol instead of rc-6/devinput | teekay | 16 | 73,876 |
7th Aug, 2014 06:08 AM Last Post: mk01 |