[SOLVED] Raspberry PI 2 + HifiBerry DAC+ freezing

[munich]

I just set-up a new raspberry PI 2 with XBian and a DAC+. I entered into /etc/modules
snd_soc_bcm2708
bcm2708_dmaengine
snd_soc_pcm512x
snd_soc_hifiberry_dacplus

aplay -l gives me:
card 0: sndrpihifiberry [snd_rpi_hifiberry_dacplus], device 0: HiFiBerry DAC+ HiFi pcm512x-hifi-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0

BUT as soon as I choose within KODI -> System -> Audio -> ALSA: Default (snd_rpi_hifiberry_dacplaus Analog) the raspberry pi 2 freezes and I have to reboot it (turn off power).

Any hint, what went wrong?

[rikardo1979]

have you checked your loggs_also does your RPi has proper PSU at least 2A stable 5V and separate PSU for any external devices attached?

[munich]

Thank you for the fast support.
PSU is 2A and 5V besides the keyboard usb bluetooth adapter I don't use any further USB interfaces.

What logs should I check?
Sorry I am a newbie.

[rikardo1979]

check my signature or read forum announcements

[munich]

Thanks.

Regarding to this link https://www.hifiberry.com/guides/gpio-usage-of-the-hifiberry-products/ , the HifiBerry DAC+ seems to use the same GPIO (GPIO2-3, GPIOs 18-21) as LIRC (GPIO 18). Which perhaps could case the freezing.

Is there a way to change the LIRC GPIO?
Or is there a way to change the DAC+ GPIOs?
Or do I have to choose between LIRC or DAC+ but both together will not work?

[munich]

I solved my problem
With modprobe lirc_rpi gpio_in_pin=11 I changed the standard GPIO 18 of LIRC to GPIO 11 and now everything DAC+ and LIRC is working fine.

[rikardo1979]

thanks for update

[nikkon]

Hi,

i have the same setup.
After adding
snd_soc_bcm2708
bcm2708_dmaengine
snd_soc_pcm512x
snd_soc_hifiberry_dacplus
to /etc/modules the board worked fine.
unfortunatelly after a restart is not starting anymore.
any clue?

p.s how can i install aplay on xbian.there is a 3party repo ?