remote Speedlink SL-6399 not working
|
6th Feb, 2013, 07:19 PM
Post: #1
|
|||
|
|||
remote Speedlink SL-6399 not working
Hi all,
I have a Speedlink SL-6399 remote which works fine with XBMCbuntu. Now I tried XBian and some buttons (Vol down, ContextMenu, ...) are not working. I followed the tutorial (Remote Config) and in step 1 the "mode2" stated: "could not get file information for /dev/lirc0" "default_init() : No such file or directory" Anybody any ideas how to get my remote working? I have not followed the other steps by getting a new lircd.conf for my remote and creating the lirc.xml. Thanks. Holger |
|||
6th Feb, 2013, 07:23 PM
Post: #2
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
Can you check if mode2 does work on XBMCbuntu?
pilight - modular domotica solution
|
|||
7th Feb, 2013, 01:15 AM
Post: #3
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
Also, can you
1) enable debug mode in XBMC? 2) run "tail -f /home/xbian/.xbmc/temp/xbmc.log" 3) Press some buttons while "tail" is running 4) Paste some lines considering the remote here pilight - modular domotica solution
|
|||
7th Feb, 2013, 07:20 PM
Post: #4
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
(6th Feb, 2013 07:23 PM)CurlyMo Wrote: Can you check if mode2 does work on XBMCbuntu? this what I got on the XBMCbunut xbmc@xbmc:~$ sudo su [sudo] password for xbmc: root@xbmc:/home/xbmc# /etc/init.d/lirc stop * Stopping remote control daemon(s): LIRC [fail] root@xbmc:/home/xbmc# mode2 mode2: could not get file information for /dev/lirc mode2: default_init(): No such file or directory |
|||
7th Feb, 2013, 07:24 PM
Post: #5
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
So the device isn't controlled by LIRC, can you check my second suggestion.
pilight - modular domotica solution
|
|||
7th Feb, 2013, 08:43 PM
Post: #6
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
(7th Feb, 2013 01:15 AM)CurlyMo Wrote: Also, can you here some lines: 05:36:36 T:3042476032 DEBUG: OnKey: volume_up (f0b9) pressed, action is VolumeUp 05:36:36 T:3042476032 DEBUG: CAnnouncementManager - Announcement: OnVolumeChanged from xbmc 05:36:36 T:3042476032 DEBUG: GOT ANNOUNCEMENT, type: 64, from xbmc, message OnVolumeChanged 05:36:38 T:3042476032 DEBUG: OnKey: f14 (f09d) pressed, action is 05:36:38 T:3042476032 DEBUG: Keyboard: scancode: 72, sym: 0127, unicode: 0000, modifier: 0 05:36:29 T:3042476032 DEBUG: Keyboard: scancode: 69, sym: 0114, unicode: 0000, modifier: 0 05:36:29 T:3042476032 DEBUG: OnKey: left (f082) pressed, action is Left 05:36:30 T:3042476032 DEBUG: Keyboard: scancode: 67, sym: 0111, unicode: 0000, modifier: 0 05:36:30 T:3042476032 DEBUG: OnKey: up (f080) pressed, action is Up 05:36:31 T:3042476032 DEBUG: Keyboard: scancode: 7f, sym: 0137, unicode: 0000, modifier: 0 05:36:31 T:3042476032 DEBUG: OnKey: leftwindows (f0d6) pressed, action is |
|||
7th Feb, 2013, 08:53 PM
Post: #7
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
This remote acts as a keyboard instead of a remote.
What you need to do is to create a custom keymap.xml for this remote like here: https://github.com/xbianonpi/xbian/blob/xbian-alpha5/etc/lirc/remotes/tigerfly.xml In this line you can see that the key known as f14 has no action set: Code: OnKey: f14 (f09d) pressed, action is Code: <f14>Stop</f14> And that for all buttons. If you're done, share the file with us, and if you need additional help, feel free to ask. pilight - modular domotica solution
|
|||
7th Feb, 2013, 09:23 PM
Post: #8
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
(7th Feb, 2013 08:53 PM)CurlyMo Wrote: This remote acts as a keyboard instead of a remote. Ok i got a file like this already. Where would I need to place it? |
|||
7th Feb, 2013, 09:27 PM
Post: #9
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
Name the file remote.xml and put it in /home/xbian/.xbmc/userdata/keymaps/ then restart xbmc
Can you also share the following outputs with us (placed on pastebin): 1) lsusb 2) dmesg 3) cat /proc/bus/input/devices And of course the remote.xml when you got it to work. Then i will include support by default. pilight - modular domotica solution
|
|||
8th Feb, 2013, 06:32 PM
Post: #10
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
(7th Feb, 2013 09:27 PM)CurlyMo Wrote: Name the file remote.xml and put it in /home/xbian/.xbmc/userdata/keymaps/ then restart xbmc Hi, ok here is the story. I already had a xml file for my remote but on the XBMCbuntu it was called keyboard.xml. Thats why it did not work on the XBian. I renamed it to remote.xml and some of the specially mapped keys started to work. Still no luck wiht the volume down and context menu. So I used the debugg and your command again and monitored the keypress. I got the correct labels and changed my remote.xml. Guess what - it works! So if sombody used a Speedlink SL 6399 remote please use the attached remote.xml and copy it to: /home/xbian/.xbmc/userdata/keymaps/ Thanks for your help. Now I can use XBian officially with my TV. |
|||
8th Feb, 2013, 07:14 PM
Post: #11
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
Can you still post the outputs of the commands i was requesting so users don't have to do anything because we can add support by default.
pilight - modular domotica solution
|
|||
8th Feb, 2013, 07:39 PM
Post: #12
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
(8th Feb, 2013 07:14 PM)CurlyMo Wrote: Can you still post the outputs of the commands i was requesting so users don't have to do anything because we can add support by default. lsusb: xbian@xbian:~# lsusb Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Bus 001 Device 004: ID 1241:e000 Belkin cat /proc/bus/input/devices: xbian@xbian:~# cat /proc/bus/input/devices I: Bus=0003 Vendor=1241 Product=e000 Version=0110 N: Name="HOLTEK YaoCoo " P: Phys=usb-bcm2708_usb-1.3/input0 S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/input/input0 U: Uniq= H: Handlers=sysrq kbd event0 B: PROP=0 B: EV=120013 B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe B: MSC=10 B: LED=1f I: Bus=0003 Vendor=1241 Product=e000 Version=0110 N: Name="HOLTEK YaoCoo " P: Phys=usb-bcm2708_usb-1.3/input1 S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.1/input/input1 U: Uniq= H: Handlers=kbd mouse0 event1 B: PROP=0 B: EV=1f B: KEY=4c37fff 72ff32d bf544446 0 0 1f0001 20c10 b17c000 267bfa d951dfed 9e1680 4400 0 10000002 B: REL=143 B: ABS=7f01 0 B: MSC=10 dmesg: see attached file I hope it helps. |
|||
9th Feb, 2013, 06:09 AM
Post: #13
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
I tried to built-in the support for this remote, can you try if i succeeded. Make a backup of the current keyboard.xml and remove it. Then do the following:
Code: sudo su pilight - modular domotica solution
|
|||
21st Feb, 2013, 05:57 PM
Post: #14
|
|||
|
|||
RE: remote Speedlink SL-6399 not working
Hi,
sorry for not coming back but with my job and 4 daughters I have only limited time. I playeed around with the remote and the remote.xml a bit more. on the end I notice you only have to map 4 keys (Vol down, More - Contextmenu, TV Power - Shutdown, Green Start - Home) to get it to work. The rest was just cosmetic for soem of my favourite keys. I saw XBians post last night and the Special Thanks. Really cool to mention me there. I downlaoded the Alpha 5 and I must say - I'M FUCKING IMPRESSED!!!! The speed is awesome and my Speedlink remote works out of the box. You guys rock and XBian is running from on my RasPi's from now on. |
|||
« Next Oldest | Next Newest »
|