Forum - XBian 1.0 Beta 1.1 Public testing

Pages: 1 2 3 4 5

XBian 1.0 Beta 1.1 is an hotfix update for XBian 1.0 Beta 1, you can upgrade to XBian 1.0 Beta 1.1 from XBian 1.0 Alpha 5 or XBian 1.0 Beta 1

in case of issues, please do the also the following: http://forum.xbian.org/thread-1077-post-12374.html#pid12374

NOTE: For advanced users only!

Changelog

Bumped kernel to 3.9.8
Fix for getting out of memory while creating the initramfs (was an issue for 256MB pi's)
Fixed the bootorder issues
Fixed xbian-config-shell layout issue
Fix for rpcbind not being started
Fix for lirc binaries not being executable
Improved initramfs creation speed
Fix for usb HDD's not being mounted
Fixed libtiff4 issue
Fixed libmad0 issue
Fixed some xbian-config bugs

Under the hood: (expert features)

there is experimental "partswap" parameter accepted in cmdline.txt which triggers creation of swap partition in the size of 256mb at the end of boot device. then, /var/swapfile as swap device is not used
/etc/default/xbmc configuration file allows to specify processes, which must be started before xbmc will be launched (by default xbmc waits for all filesystems listed in /etc/fstab to mounted and network has been started
start of xbmc does not mean, that all services are started. since beta1, the service launch is not controlled by order, but is paralleled and depends on events and conditions
in case of need to enter recovery shell, there are few possibilities: attached usb keyboard (directly on RPI) and press down and hold shift key. or, rescue/rescue_late parameters in cmdline.txt, which will drop to shell rescue - very early in the boot process or rescue_late - just before /sbin/init will be called from real root partition (with rootfs mounted under /rootfs). also, standard init= parameter works the same way as on other linux distros
"debug" in cmdline.txt will cause detailed outputs to screen. kernel loading, but service starting process as well as fstab mounting process. finaly, initramfs init script log is saved to /run/initramfs and can be used for further analyze
root= parameter in cmdline.txt can be a device or LABEL= / UUID= parameter now. this will help in situation where more usb drives are attached to the system and changing /dev/sdx name each reboot.

How to get it
Upgrading from XBian 1.0 Alpha 5

Code:

sudo su

service xbmc stop

echo "deb http://dikonist.asuscomm.com:82/XBian/APT/ wheezy main" >> /etc/apt/sources.list

apt-get update

apt-get -u -o  APT::Force-LoopBreak=1 install xbian-update

You will be prompted to type: Yes, do as I say!  Do this and press enter

After some time a blue screen will apear, select "Guess optimal character set" & press enter

Upgrading form XBian 1.0 Beta 1

Code:

sudo su

stop xbmc

echo "deb http://dikonist.asuscomm.com:82/XBian/APT/ wheezy main" >> /etc/apt/sources.list

sudo apt-get update

sudo apt-get install xbian-update -y

My SSH UI looks kinda messed up Tongue

Upgrade Beta1: You don't need the sudo on:
sudo apt-get update
sudo apt-get install xbian-update -y

as you are already root.

Error messages noted: May not be relevant.

3) Turning off rainbow screen
tune2fs 1.42.5 (29-Jul-2012)
tune2fs: No such file or directory while trying to open /dev/mmcblk0p2[/root/@]
Couldn't find valid filesystem superblock.

17) updating sysv init scripts and adapting system
insserv: /etc/init.d/watchdog: No such file or directory
insserv: /etc/init.d/xbmc: No such file or directory
insserv: /etc/init.d/hwclock.sh: No such file or directory
insserv: /etc/init.d/console-screen.sh: No such file or directory

Success: adding /boot to /etc/fstab
Error: 001-tmpfs.patch can't be applied
Error: 002-sysctl.patch can't be applied

-----------xbian-config (xbmc) -----------------------------------------
xbian-config (xbmc) errors - On Github
Gui resolution
Services and packages not correct
Unmounts/mounts all usb HDD
script fails on exit.

----------- other -------------
/etc/motd needs updating to reflect the new release.

16:02:51 T:3042590720 ERROR: GetDirectory - Error getting /home/xbian/.xbmc/media/Fonts/
16:02:51 T:3042590720 ERROR: GetDirectory - Error getting special://home/media/Fonts/
Created the folder - didn't see message again!

----------- Update 7-7-13 -----------------

Since the latest update, I haven't noticed errors.

------------ Update 9-7-13 --------------------------------
xbmc xbian-config - Update to 1.0-1.3 - Error package not found in repository
ssh xbian-config - Packages -> awk line 1 syntax error.
xbmc.log ERROR: DBus: Error org.freedesktop.UDisks.Error.PermissionDenied - Not Authorized **(This is normal and can be ignored)**
dmesg: init: Unable to connect to the system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory

(3rd Jul, 2013 08:21 PM)Smultie Wrote: [ -> ]My SSH UI looks kinda messed up

can you post output of "env" from ssh console of your xbian, but also "env" directly in the macosx terminal ?
also please "locale" run in both consoles. thanks.

mk

(3rd Jul, 2013 09:34 PM)mk01 Wrote: [ -> ]
(3rd Jul, 2013 08:21 PM)Smultie Wrote: [ -> ]My SSH UI looks kinda messed up

can you post output of "env" from ssh console of your xbian, but also "env" directly in the macosx terminal ?

mk

Macosx terminal:
....

(3rd Jul, 2013 08:55 PM)IriDium Wrote: [ -> ]17) updating sysv init scripts and adapting system
insserv: /etc/init.d/watchdog: No such file or directory
insserv: /etc/init.d/xbmc: No such file or directory
insserv: /etc/init.d/hwclock.sh: No such file or directory
insserv: /etc/init.d/console-screen.sh: No such file or directory

Success: adding /boot to /etc/fstab
Error: 001-tmpfs.patch can't be applied
Error: 002-sysctl.patch can't be applied

this text output if there for debugging, if 1.1 installed to beta1, re-adding changes will fail (because they are already applied on beta1).

the beta 1.1 package can be used to upgrade alpha5 too. this debug info will not remain for next releases. has sense only for dev team more or less.

(3rd Jul, 2013 09:36 PM)Smultie Wrote: [ -> ]LC_CTYPE=UTF-8
_=/usr/bin/env

[/quote]

can you try:

LC_CTYPE="" ssh xbian@ipaddress

and then xbian-config ? if it works, can you test editing "/usr/local/include/xbian-config/functions/language", and on line 50 change

"LANG=$LANG gettext xbian xbian-config.$1"
to
"env -i LANG=$LANG gettext xbian xbian-config.$1"

then try with standard ssh command.

root user is disabled by default.

you can enter roots console by "sudo -i".
this command is not only getting rights of id=0 and gid=0, but all .rc and .profile scripts are run as for user root.

why do you ask?

So how can I change the file?

@Smiltie What version of OSX are you running and did you upgrade from Beta1 or Alpha5?
I've just logged on with my Mac (10.4) and Xbian-config looks perfect. I was using standard terminal, what program are you using?
Try terminal and see if that is better.

(3rd Jul, 2013 11:09 PM)Smultie Wrote: [ -> ]So how can I change the file?

as xbian user :

"sudo nano /usr/local/include/xbian-config/functions/language"

mk

(4th Jul, 2013 12:25 AM)IriDium Wrote: [ -> ]@Smiltie What version of OSX are you running and did you upgrade from Beta1 or Alpha5?
I've just logged on with my Mac (10.4) and Xbian-config looks perfect. I was using standard terminal, what program are you using?
Try terminal and see if that is better.

I'm on 10.8.4, I used terminal.
After changing the file, the Xbian-config UI looks okay again.

(4th Jul, 2013 12:56 AM)Smultie Wrote: [ -> ]I'm on 10.8.4, I used terminal.
After changing the file, the Xbian-config UI looks okay again.

thanks. will commit the change.

It is working fairly well for me. Here are my comments

Working

My shared sources (Music, Picture, Videos) are now added (was an issue with resources not being started up when xbmc started)
Icons/images (textures)

No change/not working

version 1.6.18 of tvheadend client is installed. xbmc indicates v 1.6.19 is available as an update, but selecting Update does nothing.
(Edit: This was an issue with WinSCP's internal editor. Using Notepad as an editor resolved it.) My xbmc.log is still getting truncated.
(Edit: This turned out to be a server mis-configuration...) My NFS shares are not appearing when I try to add a source. (they work with my other XBMC installs and my exports are shared with my entire network)

Thanks again!

Doug

(4th Jul, 2013 02:18 AM)doug Wrote: [ -> ][*]My NFS shares are not appearing when I try to add a source. (they work with my other XBMC installs and my exports are shared with my entire network)

again please, more info would be appreciated. for example, what is the nfs server (unix/windows), what nfs version, what shows rpcinfo -p [server] etc etc.

by not appearing you mean add source -> browse -> network filesystem (nfs) I suppose ?

Pages: 1 2 3 4 5