Forum

Software
XBian version: 1.0 (knockout)
XBMC/Kodi version:
Overclock settings: default

Hardware
Raspberry Pi 2 B
Power supply rating:
SD card size and make/type: 8gb NOOBS card (wiped)
Network: ethernet
Connected devices: 2 sata hdd, TV, router

Log files
http://xbmclogs.com/p5dxungjo

Problem description:
1) resolution configuration is not persistent: when I go to System > Settins > Video output > Video calibration and work through the calibrator, the choices get purged back to defaul on reboot of pi.



How to reproduce:
Set up calibration, and then reboot.

Greetings, all! I have no idea why this would work this way. When the pi reboots, it STARTS at the right calibration for just a second, then snaps back to the default--clock-trimmed-by-my-tv-edge--way.

Any ideas?

Micah

Try adding this to /boot/config.txt then reboot, calibrate and reboot/restart kodi and see if it sticks

hdmi_ignore_edid=0xa5000080

(26th Mar, 2015 09:36 AM)f1vefour Wrote: [ -> ]Try adding this to /boot/config.txt then reboot, calibrate and reboot/restart kodi and see if it sticks

hdmi_ignore_edid=0xa5000080

Thanks, but it looks like that line is already in my config.txt file.

Change disable_overscan to 0.

Try adjusting skin zoom.