Forum

Full Version: Any idea when Debian Stretch will be available for Pi 1?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Any idea when Debian Stretch will be available for Pi 1 via package update/upgrade?

Thanks.
(31st Aug, 2017 03:38 AM)Exnor Wrote: [ -> ]Any idea when Debian Stretch will be available for Pi 1 via package update/upgrade?

Thanks.

Hmmm, forgot to push latest commits for upgrading Jessie->Stretch (update procedure is ready since months) BlushConfused

Will do this next weekend Shy
(31st Aug, 2017 06:43 AM)Nachteule Wrote: [ -> ]Hmmm, forgot to push latest commits for upgrading Jessie->Stretch (update procedure is ready since months) BlushConfused

Will do this next weekend Shy

Nice Smile. Any issues with the new version or performance improvements?
(31st Aug, 2017 06:05 PM)Exnor Wrote: [ -> ]Nice Smile. Any issues with the new version or performance improvements?

Hmmm Dodgy I don't think that there is big difference between Jessie and Stretch.

I'm running Stretch since February and I think, most of the bugs has been sorted out Shy
Upgrade function (xbian-package-repo) online now.

You get a message inside Kodi for distribution upgrade available and you're able to upgrade by running xbian-config GUI, section update
Only for PI 1? I am on Pi 2

xbian-package-repo was updated today, the strech message is shown in kodi.
But now update in the xbian-config GUI
(2nd Sep, 2017 11:46 PM)Nachteule Wrote: [ -> ]Upgrade function (xbian-package-repo) online now.

You get a message inside Kodi for distribution upgrade available and you're able to upgrade by running xbian-config GUI, section update

I did a manual update today as per http://forum.xbian.org/thread-3914.html taking the repo from wiki (http://wiki.xbian.org/doku.php/repos)

However did run into some nastyness, as described in my post there.
(4th Sep, 2017 06:52 AM)Bastlwastl Wrote: [ -> ]Only for PI 1? I am on Pi 2

Of course, for all RPi's and Cubox's and Humminboards Smile not only for Pi1
(2nd Sep, 2017 11:46 PM)Nachteule Wrote: [ -> ]Upgrade function (xbian-package-repo) online now.

You get a message inside Kodi for distribution upgrade available and you're able to upgrade by running xbian-config GUI, section update

Any changes on cpu governor? I had mine set to performance but now I'm getting different infos from xbian stats and Kodi....
Kodi reports my 1Ghz oc but xbian stats reports the default 700Mhz.... Any ideas why?

Thanks
(8th Sep, 2017 04:15 AM)Exnor Wrote: [ -> ]Any changes on cpu governor? I had mine set to performance but now I'm getting different infos from xbian stats and Kodi....
Kodi reports my 1Ghz oc but xbian stats reports the default 700Mhz.... Any ideas why?

Thanks

No, cpu covernor has absolutely nothing to do with Debian Stretch

What is meant by xbian stats????

Did you checked your overclocking settings?

What about of
Terminal

root@kmxbilr ~ # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
ondemand
root@kmxbilr ~ # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
500000
root@kmxbilr ~ # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1000000
root@kmxbilr ~ #

(I'm using ondemand)
(8th Sep, 2017 04:36 AM)Nachteule Wrote: [ -> ]No, cpu covernor has absolutely nothing to do with Debian Stretch

What is meant by xbian stats????

Did you checked your overclocking settings?

What about of
Terminal

root@kmxbilr ~ # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
ondemand
root@kmxbilr ~ # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
500000
root@kmxbilr ~ # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1000000
root@kmxbilr ~ #

(I'm using ondemand)

Hmm after a reboot i got the same results with:

Terminal

xbian-stats
Governor: performance
Memory: 512MB (368MB ARM, 144MB GPU)
Min Freq: 700Mhz | 250Mhz | 500Mhz
Max Freq: 1000Mhz | 500Mhz | 500Mhz
Voltages: +6, 1.350 | 0, 1.200
Other: TEMP_LIMIT=85C
Version: May 4 2017 16:00:32, version 809412fa5f5f7d88833e076d71dc329367441601 (clean) (release)
vcg path: /opt/vc/bin/vcgencmd
Codecs: H264 VP8 VORBIS MJPG
Booted: Thu Sep 7 23:08:27 WEST 2017

Time ARM Core h264 Core Temp (Max) IRQ/s RX B/s TX B/s
======== ======= ======= ======= =============== ====== ========== ==========
23:12:22 1000Mhz 500Mhz 0Mhz 56.22C (56.22C) 419 0 0
23:12:24 1000Mhz 500Mhz 0Mhz 55.69C (56.22C) 472 0

And on Kodi info...

Also my files are:

Terminal

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
performance

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
1000000

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1000000

So situation solved.... i think (?).
Reference URL's