+- Forum (http://forum.xbian.org)
+-- Forum: Hardware (/forum-7.html)
+--- Forum: Remotes and CEC support (/forum-26.html)
+--- Thread: [PROBLEM] TV is waked up by Xbian after TV shutdown (/thread-3127.html)
Pages: 1 2
TV is waked up by Xbian after TV shutdown - HugoG - 17th Sep, 2015 05:40 AM
I have some issue with CEC using lastest xbian version on RPI 2
Software
XBian version: xbian 20150911-3
XBMC/Kodi version: Kodi 15.2-RC2 git:2015-03-13-2d0c3cf
Overclock settings: 900
Hardware
Device type and model (e.g. Raspberry Pi Model A/B 256/512 MB, CuBox-i i4Pro, ...): Rpi 2
Power supply rating: http://www.amazon.fr/Aukru%C2%AE-Alimentation-Chargeur-Adaptateur-Raspberry/dp/B00U88KSHO/ref=pd_bxgy_147_img_y
SD card size and make/type: Samsung 32 Go Pro MicroSDHC UHS-I Grade 1 Classe 10
Network (Ethernet or wireless): ethernet
Connected devices (TV, USB, network storage, ...): Philips TV + usb drive via powered hub
CEC Setting : ignore init : true, other setting is default settings.
It's a fresh install of Xbian from yesterday, I was using xbian for 2 years on rpi 1.
Problem description:
1. I shut down the tv with the remote power button
2. TV is shutted down
3. Xbian wake up the TV, the TV is now ON (and it shoundn't !)
Log files
Here is the cec-client log just after powering off the TV :
Code:
TRAFFIC: [ 41763] >> 0f:36
DEBUG: [ 41763] TV (0): power status changed from 'on' to 'standby'
DEBUG: [ 41764] >> TV (0) -> Broadcast (F): standby (36)
DEBUG: [ 46663] GetPhysicalAddress - physical address = 1100
NOTICE: [ 46664] physical address changed to 1100
DEBUG: [ 46664] physical address unchanged (1100)
WARNING: [ 56730] unhandled response received: opcode=8f initiator=1 destination=0 response=0
TRAFFIC: [ 56810] >> 01:90:01
DEBUG: [ 56810] >> TV (0) -> Recorder 1 (1): report power status (90)
WARNING: [ 61873] unhandled response received: opcode=4 initiator=1 destination=0 response=0
WARNING: [ 61993] unhandled response received: opcode=82 initiator=1 destination=f response=0
DEBUG: [ 62566] GetPhysicalAddress - physical address = 1100
NOTICE: [ 62567] physical address changed to 1100
DEBUG: [ 62567] physical address unchanged (1100)
WARNING: [ 66792] unhandled response received: opcode=8f initiator=1 destination=0 response=0
TRAFFIC: [ 66871] >> 01:90:02
DEBUG: [ 66871] TV (0): power status changed from 'standby' to 'in transition from standby to on'
DEBUG: [ 66871] >> TV (0) -> Recorder 1 (1): report power status (90)
TRAFFIC: [ 70980] >> 0f:84:00:00:00
DEBUG: [ 70980] << Recorder 1 (1) -> broadcast (F): physical adddress 1100
TRAFFIC: [ 70981] << 1f:84:11:00:01
DEBUG: [ 70981] >> TV (0) -> Broadcast (F): report physical address (84)
DEBUG: [ 71017] GetPhysicalAddress - physical address = 1100
NOTICE: [ 71018] physical address changed to 1100
DEBUG: [ 71131] physical address unchanged (1100)
WARNING: [ 71281] unhandled response received: opcode=84 initiator=1 destination=f response=0
TRAFFIC: [ 71386] >> 0f:87:00:90:3e
DEBUG: [ 71387] TV (0): power status changed from 'in transition from standby to on' to 'on'
DEBUG: [ 71387] << Recorder 1 (1) -> Broadcast (F): vendor id Philips (903e)
TRAFFIC: [ 71387] << 1f:87:00:15:82
DEBUG: [ 71388] >> TV (0) -> Broadcast (F): device vendor id (87)
WARNING: [ 71687] unhandled response received: opcode=87 initiator=1 destination=f response=0
DEBUG: [ 71916] GetPhysicalAddress - physical address = 1000
NOTICE: [ 71916] physical address changed to 1000
DEBUG: [ 71916] setting physical address to '1000'
DEBUG: [ 71916] marking Recorder 1 (1) as inactive source
NOTICE: [ 71917] >> source deactivated: Recorder 1 (1)
DEBUG: [ 71917] Recorder 1 (1): physical address changed from 1100 to 1000
DEBUG: [ 71917] << Recorder 1 (1) -> broadcast (F): physical adddress 1000
TRAFFIC: [ 71917] << 1f:84:10:00:01
DEBUG: [ 72068] making Recorder 1 (1) the active source
NOTICE: [ 72069] >> source activated: Recorder 1 (1)
DEBUG: [ 72070] sending active source message for 'Recorder 1'
NOTICE: [ 72070] << powering on 'TV' (0)
TRAFFIC: [ 72070] << 10:04
WARNING: [ 72307] unhandled response received: opcode=84 initiator=1 destination=f response=0
NOTICE: [ 72367] << Recorder 1 (1) -> broadcast (F): active source (1000)
TRAFFIC: [ 72368] << 1f:82:10:00
WARNING: [ 72468] unhandled response received: opcode=4 initiator=1 destination=0 response=0
DEBUG: [ 72578] << Recorder 1 (1) -> TV (0): menu state 'activated'
TRAFFIC: [ 72580] << 10:8e:00
WARNING: [ 72697] unhandled response received: opcode=82 initiator=1 destination=f response=0
WARNING: [ 72757] unhandled response received: opcode=4 initiator=1 destination=0 response=0
DEBUG: [ 72848] GetPhysicalAddress - physical address = 1100
NOTICE: [ 72848] physical address changed to 1100
DEBUG: [ 72848] setting physical address to '1100'
DEBUG: [ 72848] marking Recorder 1 (1) as inactive source
NOTICE: [ 72848] >> source deactivated: Recorder 1 (1)
DEBUG: [ 72848] Recorder 1 (1): physical address changed from 1000 to 1100
DEBUG: [ 72848] << Recorder 1 (1) -> broadcast (F): physical adddress 1100
TRAFFIC: [ 72848] << 1f:84:11:00:01
WARNING: [ 72967] unhandled response received: opcode=82 initiator=1 destination=f response=0
DEBUG: [ 73209] making Recorder 1 (1) the active source
NOTICE: [ 73209] >> source activated: Recorder 1 (1)
DEBUG: [ 73209] sending active source message for 'Recorder 1'
NOTICE: [ 73209] << powering on 'TV' (0)
TRAFFIC: [ 73211] >> 01:00:8e:00Also, I've notice a notification after tv is waked up but cannot read it before it's dismiss, if you have clue about it it's welcome.
Thank you for your help,
Hugo
RE: TV is waked up by Xbian after TV shutdown - Skywatch - 17th Sep, 2015 08:54 AM
Excellent format first post!
Where did you disable CEC? In the kodi menus or in the /boot/config.txt?
Do you have other CEC capable devices attached to the TV? What happens if you disconnect them and try again?
RE: TV is waked up by Xbian after TV shutdown - HugoG - 17th Sep, 2015 05:24 PM
CEC is not disable, I don't see an option that will fix the issue. I've always used Kodi xbian settings (GUI so). I've also tried ot disable CEC? reboot, enable CEC and reboot, but i didn't have fix the issue.
RE: TV is waked up by Xbian after TV shutdown - tvdeynde - 25th Sep, 2015 05:10 PM
I have the exact same issue after the latest upgrade of xbian.
Also on a pi2 and a philips TV.
I noticed in cec-client that after I try to shut down the TV, xbian keeps on sending 'powering on TV' to the TV.
This wasn't an issue in the past.
RE: TV is waked up by Xbian after TV shutdown - HugoG - 25th Sep, 2015 05:18 PM
For now I've disable CEC on xbian, using Yatse as remote control :/
RE: TV is waked up by Xbian after TV shutdown - Roy Terhaar - 26th Sep, 2015 12:31 AM
Got the same problem.
Philips TV - Yamaha receiver - Raspberry Pi B+.
Somehow Kodi keeps claiming HDMI port as active Input device.
Even if I am actually streaming from Minidlna server that runs on the PI, Kodi still keeps claiming the HDMI port. For now I disabled the option in the settings to wake up the TV on startup.
RE: TV is waked up by Xbian after TV shutdown - tvdeynde - 26th Sep, 2015 04:41 PM
(26th Sep, 2015 12:31 AM)Roy Terhaar Wrote: Got the same problem.
Philips TV - Yamaha receiver - Raspberry Pi B+.
Somehow Kodi keeps claiming HDMI port as active Input device.
Even if I am actually streaming from Minidlna server that runs on the PI, Kodi still keeps claiming the HDMI port. For now I disabled the option in the settings to wake up the TV on startup.
I also have a Yamaha receiver in between. Disabling CEC entirely works as a workaround but just at startup not. Is there a way to disable just the wake-functionality but keep the capability that I can still use the remote of my yamaha.
RE: TV is waked up by Xbian after TV shutdown - Roy Terhaar - 27th Sep, 2015 11:14 PM
(26th Sep, 2015 04:41 PM)tvdeynde Wrote: I also have a Yamaha receiver in between. Disabling CEC entirely works as a workaround but just at startup not. Is there a way to disable just the wake-functionality but keep the capability that I can still use the remote of my yamaha.
I can't answer this question; I have not tried it. I am not using the Yamaha remote at all. For Kodi I use a wireless mouse on Raspberry Pi. (Good thing now in version 15 is that the mouse scroll wheel is supported!)
I am controlling the Yamaha through the Web app on my phone if I need to switch inputs. Only thing with CEC disabled is that I can't control Kodi using TV remote..
But maybe it gets fixed in future; then I'll enable it again.
RE: TV is waked up by Xbian after TV shutdown - mk01 - 1st Oct, 2015 12:55 PM
@HugoG
check /etc/default/xbmc, specially this parts
Code:
HDMIPORT=0
# Turn CEC capable TV off on xbmc entering screensaver (after 'AFTER' minutes)
SCREENOFF=no
AFTER=3
# Stop XBMC when the TV is turned off. This will also start XBMC again when
# it's turned on.
XBMCOFF=no
# Turn CEC capable TV on when XBMC exits.
XBMCEXITON=noif you don't have by accident something as yes.
This are parts of CEC / TV on/off support from times, when XBMC had this not implemented yet. This should have been removed, but never was and the XBian logic (scripts) are still there - although by default shouldn't be active (those "unhandled response received" events do strongly indicate that perhaps I'm right).
so check that, between I will slowly start removing that from system completely.
Report back.
RE: TV is waked up by Xbian after TV shutdown - tvdeynde - 1st Oct, 2015 04:57 PM
Everything is set to 'no' or off
Terminal
xbian@living ~ $ cat /etc/default/xbmc
# Configuration for XBMC
DAEMON=$(test -x /usr/local/lib/kodi/kodi.bin && nm=kodi || nm=xbmc; echo /usr/local/lib/$nm/$nm.bin
# Put name of all processes which XBMC should wait for before it will be started.
# e.g. WAITFOR=""
WAITFOR=""
# Niceness levels for XBMC while playing and while in screensaver is active.
PPLAYER="-3"
PSAVER="7"
HDMIPORT=0
# Turn CEC capable TV off on xbmc entering screensaver (after 'AFTER' minutes)
SCREENOFF=no
AFTER=3
# Stop XBMC when the TV is turned off. This will also start XBMC again when
# it's turned on.
XBMCOFF=no
# Turn CEC capable TV on when XBMC exits.
XBMCEXITON=no
# Turn CEC capable TV off on system shutdown. A (just one) custom script can
# also be run.
SCROFFHALT=no
SCROFFRUN="/run.my.special.script.sh"
# Enable dynamic priority handling of XBMC/Kodi process.
DPRIORITY=yes
# Disable overclocking (and overvolting) when the screensaver is started.
# When the screensaver is stopped, it will enable overclocking again.
# It does so by changing the CPUFreq governor to "conservative", which doesn't
# actually disable overclocking, but tries to set it to the minimum required
# by current system load.
SCR_OVERCLOCK_OFF="no"
RE: TV is waked up by Xbian after TV shutdown - mk01 - 1st Oct, 2015 05:04 PM
(1st Oct, 2015 04:57 PM)tvdeynde Wrote: Everything is set to 'no' or off
OK
) just you was not sending that log I was commenting so send log. with xbmc started with --debug (/etc/init/xbmc.conf parameter DEBUG=), also don't forget to select extra logging for CEC.
UNCUT log send via pastebinit or any other.
thx
RE: TV is waked up by Xbian after TV shutdown - Bastlwastl - 12th Oct, 2015 08:31 AM
@mk01
Have the same Problem, kodi.log attached
How can i create a cec log?
kodi.log (Click to View)
RE: TV is waked up by Xbian after TV shutdown - tvdeynde - 14th Oct, 2015 07:25 PM
Sorry to come back only now but I don't really know how to produce the requested logs/debug files.
Can you walk me through?
Thanks!
Tom
RE: TV is waked up by Xbian after TV shutdown - Bastlwastl - 14th Oct, 2015 08:14 PM
(14th Oct, 2015 07:25 PM)tvdeynde Wrote: Sorry to come back only now but I don't really know how to produce the requested logs/debug files.
Can you walk me through?
Start your Rasp
SSH in
Terminal
stop xbmc
Terminal
start xbmc --debug
The log is in .kodi/temp
But i have now idea with cec log
Edit: google is my friend...
Found this http://kodi.wiki/view/Log_file/Advanced
I will try it
RE: TV is waked up by Xbian after TV shutdown - Bastlwastl - 14th Oct, 2015 10:18 PM
OK, here is the kodi log with cec debug on:
kodi.log:
http://pastebin.com/aXPiiJAz
kodi.old.log
http://pastebin.com/nZPUPsdY
Shutdown Rasp two times