(26th Nov, 2017 11:58 PM)Nachteule Wrote:  Seems you have a wlan router issue or your Pi3 is broken
I can not reproduce this, my Pi3 finds available wlan's always.

(27th Nov, 2017 12:18 AM)deeej Wrote:  

(26th Nov, 2017 11:58 PM)Nachteule Wrote:  Seems you have a wlan router issue or your Pi3 is broken
I can not reproduce this, my Pi3 finds available wlan's always.

Thank you for your reply. That´s what i thought. But it works. If i install an Xbian version that contains Kodi 17.4.

My other friend who basically runs the same setup also have the exact same problem.

I could run 17.4 but the problem is that it WILL auto download and install Kodi 17.6 EVEN if i turn off all the updates...both add-ons and under "Updates/Xbian". It doesn´t mather.

(27th Nov, 2017 12:31 AM)Nachteule Wrote:  

(27th Nov, 2017 12:18 AM)deeej Wrote:  

(26th Nov, 2017 11:58 PM)Nachteule Wrote:  Seems you have a wlan router issue or your Pi3 is broken
I can not reproduce this, my Pi3 finds available wlan's always.

Thank you for your reply. That´s what i thought. But it works. If i install an Xbian version that contains Kodi 17.4.

My other friend who basically runs the same setup also have the exact same problem.

I could run 17.4 but the problem is that it WILL auto download and install Kodi 17.6 EVEN if i turn off all the updates...both add-ons and under "Updates/Xbian". It doesn´t mather.

I can't believe that Kodi 17.6 is the problem, because the xbian-config modules are exactly the same (they reside in different packages)

You can lock xbian-package-xbmc, so this package will never be updated

Terminal

sudo echo xbian-package-xbmc hold | dpkg --set-selections

(27th Nov, 2017 01:43 AM)deeej Wrote:  There is an error message i get. I followed this article (Method 2):
http://techbmc.blogspot.se/2013/05/how-to-set-up-wi-fi-usb-adaptor-on-xbian.html?m=1

I quit Kodi...log in (xbian) and then in the menu tried to select Network. Then Wlan0 and DHCP and the Scan.

There is a very quick message:
"Interface doesn´t support scanning : Invalid parameters."

Then there is no routers. Like in Kodi 17.6. But in Kodi i could not see the error message.

(27th Nov, 2017 02:36 AM)Nachteule Wrote:  

(27th Nov, 2017 01:43 AM)deeej Wrote:  There is an error message i get. I followed this article (Method 2):
http://techbmc.blogspot.se/2013/05/how-to-set-up-wi-fi-usb-adaptor-on-xbian.html?m=1

I quit Kodi...log in (xbian) and then in the menu tried to select Network. Then Wlan0 and DHCP and the Scan.

There is a very quick message:
"Interface doesn´t support scanning : Invalid parameters."

Then there is no routers. Like in Kodi 17.6. But in Kodi i could not see the error message.

Hmmm, what happens if you run following command:

Terminal

sudo iwlist wlan0 scanning | grep ESSID

You should get an output like this:

Terminal

xbian@kmxbilr2 /usr/local/include/xbian-config/modules/network $ sudo iwlist wlan0 scanning | grep ESSID
[sudo] Passwort für xbian:
ESSID:"BigBellN"
ESSID:"WLAN-0024FE947921"
ESSID:"FRITZ!Box 6490 Cable"
ESSID:"Vodafone Hotspot"
ESSID:"Vodafone Homespot"
ESSID:"hierwohneich"
ESSID:"www.delta.events"
ESSID:"Gaesteklo"
ESSID:"DIRECT-98-HP OfficeJet Pro 8710"
ESSID:"Heimatzoone"
ESSID:"HITRON-F6B0"
xbian@kmxbilr2 /usr/local/include/xbian-config/modules/network $

(27th Nov, 2017 08:47 AM)Nachteule Wrote:  @deeej

You're confusing me

Please post output of

Code:

sudo iwconfig

and

Code:

sudo ip addr

And you're using onboard WLAN interface of Pi3?

(27th Nov, 2017 09:02 AM)deeej Wrote:  Im not "Linux Savvy", no connection since wifi doesn´t seem to work. So i had to take a screenshot of the tv. Hope the image isn´t to "fuzzy"...sorry for the "noobinez" :-)

(27th Nov, 2017 09:26 AM)Nachteule Wrote:  

(27th Nov, 2017 09:02 AM)deeej Wrote:  Im not "Linux Savvy", no connection since wifi doesn´t seem to work. So i had to take a screenshot of the tv. Hope the image isn´t to "fuzzy"...sorry for the "noobinez" :-)

That's ok

Your outputs are ok, but I do not understand why iwlist scanning does not work

Lets try configuring your wlan0 manually:

Edit /etc/network/interfaces (sudo nano /etc/network/interfaces)

and configure wlan0 as follows

Code:

auto eth0 wlan0 lo

iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp

allow-hotplug wlan0
iface wlan0 inet dhcp
wpa-ssid "ESSID"
wpa-psk "WPAPSK"

"ESSID' is the ESSID of your WLAN
"WPAPSK' is your WLAN key

(27th Nov, 2017 09:57 AM)Nachteule Wrote:  if Asus router is your ESSID, could you change your ESSID so you don't use space's in your ID? (I don't believe that this is the issue, but this is my last idea for today )

If wlan0 is working, the device must receive a IP adress from your router

Code:

sudo ifconfig wlan0 | grep inet

or

Code:

sudo ip add show wlan0 | grep inet

Btw, your /etc/network/interface looks ok

Ah, another idea, please post output of command

Code:

sudo dmesg | grep brcmfmac

must look like this:

Terminal

[ 3.214061] usbcore: registered new interface driver brcmfmac
[ 3.304119] brcmfmac: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
[ 3.305346] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.5.0 Inc Compiler: 1.29.4 Inc ClmImport: 1.29.25 Creation: 2015-12-15 17:59:18
[ 16.607961] brcmfmac: power management disabled
[ 17.560467] brcmfmac: power management disabled