RE: TP-Link TL-WN725N not recognized - mk01 - 21st Dec, 2013 07:49 PM
(19th Dec, 2013 05:27 AM)jjc Wrote: so it will work in the Beta 2.1? Do you have any estimated time when it will be released?
Cheers
it is part of xbian-package-kernel=1.3-6.3a including firmware (not tested as we don't have this type of dongle). you need to install xbian-package-initramfs-tools=1.3.2-1e together with it.
you can install them manually with dpkg and wget as few times already posted in this thread. you will find the .debs here:
http://xbian.brantje.com/pool/staging/main/x/
or you can add staging repo as source for apt. and then just upgrade (http://forum.xbian.org/thread-1861.html) ((just STAGING, don't add devel))
oh and you will also need xbian-update=1.0.2-12d
it is also the same location
RE: TP-Link TL-WN725N not recognized - jjc - 22nd Dec, 2013 09:57 AM
Thanks bcre3306, victmo and mk01 for the help.
Setting the SSID via SSH fixed my issue.
RE: TP-Link TL-WN725N not recognized - mk01 - 22nd Dec, 2013 10:02 AM
can you post output of "iwlist scanning" ?
some cards have different output, probably the config tool can't parse it properly. if you send output, we can adapt.
RE: TP-Link TL-WN725N not recognized - jjc - 22nd Dec, 2013 06:16 PM
(22nd Dec, 2013 10:02 AM)mk01 Wrote: can you post output of "iwlist scanning" ?
some cards have different output, probably the config tool can't parse it properly. if you send output, we can adapt.
No problem. Thanks for all your help
Code:
wlan0 Scan completed :
Cell 01 - Address: 00:22:B0:95:A5:F5
ESSID:"Twisted"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.412 GHz (Channel 1)
Encryption key:on
Bit Rates:54 Mb/s
Extra:wpa_ie =dd1a0050f20101000050f20202000050f2040050f20201000050f202
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Extra:rsn_ie =30180100000fac020200000fac04000fac020100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: DD750050F204104A00011010440001021041000100103B00010310470010A63C534E6F1C3D74CF560022B095A5F510210006442D4C696E6B102300074449522D333030102400074449522D3330301042000830303030303030301054000800060050F2040001101100074449522D33303010080002008E
Quality=2/100 Signal level=16/100
Cell 02 - Address: AC:22:0B:BB:C0:40
ESSID:"ASUS-C040"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.412 GHz (Channel 1)
Encryption key:on
Bit Rates:108 Mb/s
Extra:wpa_ie =dd1a0050f20101000050f20202000050f2020050f20401000050f202
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Extra:rsn_ie =30180100000fac020200000fac02000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Quality:0 Signal level:0 Noise level:0
Cell 03 - Address: 00:26:5A:35:E7:59
ESSID:"MARTYNA-PC_Network"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.417 GHz (Channel 2)
Encryption key:on
Bit Rates:54 Mb/s
Extra:wpa_ie =dd160050f20101000050f20401000050f20401000050f202
IE: WPA Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Extra:rsn_ie =30140100000fac040100000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD0E0050F204104A0001101044000102
Quality:0 Signal level:0 Noise level:0
Cell 04 - Address: 00:22:3F:81:C7:8A
ESSID:"tygrys"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.422 GHz (Channel 3)
Encryption key:on
Bit Rates:54 Mb/s
Extra:wpa_ie =dd1a0050f20101000050f20202000050f2020050f20401000050f202
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Extra:rsn_ie =30180100000fac020200000fac02000fac040100000fac020500
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Preauthentication Supported
IE: Unknown: DD0E0050F204104A0001101044000101
Quality:0 Signal level:0 Noise level:0
Cell 05 - Address: 00:23:54:AF:12:8A
ESSID:"toya123459098"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:54 Mb/s
Extra:wpa_ie =dd180050f20101000050f20201000050f20201000050f2010000
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : 802.1x
Quality:0 Signal level:0 Noise level:0
Cell 06 - Address: 00:27:19:DD:52:74
ESSID:"Sylwia"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:54 Mb/s
Quality:0 Signal level:0 Noise level:0
Cell 07 - Address: 00:21:04:1B:75:DF
ESSID:"ConnectionPoint"
Protocol:IEEE 802.11bg
Mode:Master
Frequency:2.437 GHz (Channel 6)
Encryption key:on
Bit Rates:54 Mb/s
Extra:rsn_ie =30180100000fac020200000fac02000fac040100000fac020100
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Preauthentication Supported
Quality:0 Signal level:0 Noise level:0
Cell 08 - Address: E0:91:F5:DE:D0:9E
ESSID:"NETGEAR"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:108 Mb/s
Extra:wpa_ie =dd1c0050f20101000050f20202000050f2040050f20201000050f2020c00
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Extra:rsn_ie =30180100000fac020200000fac04000fac020100000fac020c00
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: DD7F0050F204104A00011010440001011041000100103B0001031047001005F5676A70B3AFF0403829EC75D4DC2D1021000D4E4554474541522C20496E632E10230009574E5231303030763310240009574E523130303076331042000538333235381054000800060050F204000110110009574E52313030307633100800020084
Quality:0 Signal level:0 Noise level:0
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
RE: TP-Link TL-WN725N not recognized - mk01 - 23rd Dec, 2013 09:46 AM
@jjc
thanks, I found the wifi specifics and fixed in xbian-package-config-shell ver 2.1.6-54
RE: TP-Link TL-WN725N not recognized - Mfox2010 - 24th Dec, 2013 09:29 PM
(23rd Dec, 2013 09:46 AM)mk01 Wrote: @jjc
thanks, I found the wifi specifics and fixed in xbian-package-config-shell ver 2.1.6-54
Hi,
Is it possible to get this package and how ?
After I type apt-get install xbian-package-config-shell it is written that I have the newest version (2.1.6-53 ?)
Generally I have w problem with connecting to my wireless network. I manually set up SSID and WPA via SSH, as victmo and jjc advised. Now connection status is UP, wifi module is blinking, but still a cannot connect to my router. Tried DHCP and static IP. I use d-link dir-635, WPA2 (Auto Mode WPA/WPA2); xbian 1.0 beta 2, clean install with update &upgrade.TL-WN725N ver2.0. Any ideas how to fix it ?
thanks in advance
update:
log from var/log/syslog
Dec 25 12:06:37 xbian wpa_supplicant[4992]: wlan0: CTRL-EVENT-TERMINATING - signal 15 received
Dec 25 12:06:37 xbian wpa_supplicant[5191]: nl80211: 'nl80211' generic netlink not found
Dec 25 12:06:37 xbian wpa_supplicant[5191]: Failed to initialize driver 'nl80211'
Dec 25 12:06:37 xbian wpa_supplicant[5191]: rfkill: Cannot open RFKILL control device
Dec 25 12:06:40 xbian wpa_supplicant[5204]: wlan0: Trying to associate with 00:1c:f0:f8:18:ad (SSID='necik' freq=2422 MHz)
Dec 25 12:06:40 xbian wpa_supplicant[5204]: wlan0: Association request to the driver failed
Dec 25 12:06:40 xbian wpa_supplicant[5204]: wlan0: Associated with 00:1c:f0:f8:18:ad
Dec 25 12:06:40 xbian wpa_supplicant[5204]: wlan0: WPA: Key negotiation completed with 00:1c:f0:f8:18:ad [PTK=CCMP GTK=TKIP]
Dec 25 12:06:40 xbian wpa_supplicant[5204]: wlan0: CTRL-EVENT-CONNECTED - Connection to 00:1c:f0:f8:18:ad completed (auth) [id=0 id_str=]
and etc/network/interfaces
auto lo
iface lo inet loopback
iface eth0 inet dhcp
allow-hotplug wlan0
iface wlan0 inet static
wpa-ssid necik
wpa-psk mypassword
address 192.168.5.222
netmask 255.255.255.0
gateway 192.168.5.1
iface default inet dhcp
RE: TP-Link TL-WN725N not recognized - Mfox2010 - 2nd Jan, 2014 09:00 PM
(24th Dec, 2013 09:29 PM)Mfox2010 Wrote: (23rd Dec, 2013 09:46 AM)mk01 Wrote: @jjc
thanks, I found the wifi specifics and fixed in xbian-package-config-shell ver 2.1.6-54
Hi,
Is it possible to get this package and how ?
After I type apt-get install xbian-package-config-shell it is written that I have the newest version (2.1.6-53 ?)
Generally I have w problem with connecting to my wireless network. I manually set up SSID and WPA via SSH, as victmo and jjc advised. Now connection status is UP, wifi module is blinking, but still a cannot connect to my router. Tried DHCP and static IP. I use d-link dir-635, WPA2 (Auto Mode WPA/WPA2); xbian 1.0 beta 2, clean install with update &upgrade.TL-WN725N ver2.0. Any ideas how to fix it ?
thanks in advance
update:
log from var/log/syslog
Dec 25 12:06:37 xbian wpa_supplicant[4992]: wlan0: CTRL-EVENT-TERMINATING - signal 15 received
Dec 25 12:06:37 xbian wpa_supplicant[5191]: nl80211: 'nl80211' generic netlink not found
Dec 25 12:06:37 xbian wpa_supplicant[5191]: Failed to initialize driver 'nl80211'
Dec 25 12:06:37 xbian wpa_supplicant[5191]: rfkill: Cannot open RFKILL control device
Dec 25 12:06:40 xbian wpa_supplicant[5204]: wlan0: Trying to associate with 00:1c:f0:f8:18:ad (SSID='necik' freq=2422 MHz)
Dec 25 12:06:40 xbian wpa_supplicant[5204]: wlan0: Association request to the driver failed
Dec 25 12:06:40 xbian wpa_supplicant[5204]: wlan0: Associated with 00:1c:f0:f8:18:ad
Dec 25 12:06:40 xbian wpa_supplicant[5204]: wlan0: WPA: Key negotiation completed with 00:1c:f0:f8:18:ad [PTK=CCMP GTK=TKIP]
Dec 25 12:06:40 xbian wpa_supplicant[5204]: wlan0: CTRL-EVENT-CONNECTED - Connection to 00:1c:f0:f8:18:ad completed (auth) [id=0 id_str=]
and etc/network/interfaces
auto lo
iface lo inet loopback
iface eth0 inet dhcp
allow-hotplug wlan0
iface wlan0 inet static
wpa-ssid necik
wpa-psk mypassword
address 192.168.5.222
netmask 255.255.255.0
gateway 192.168.5.1
iface default inet dhcp
update 2: give up I've changed to raspbmc. Works now
RE: TP-Link TL-WN725N not recognized - mk01 - 8th Jan, 2014 12:02 AM
RFKILL means that the card has "switch" control as poweroff/on (as for instance WiFi or Bluetooth cards in notebooks have switches to power them up/down).
a solution is to install small rfkill control util "rfkill" and then
Code:
sudo -i
apt-get install rfkill
rfkill list
…
rfkill unblock XYZ
RE: TP-Link TL-WN725N not recognized - koper89 - 18th Jan, 2014 08:15 AM
Hi guys,
I have also a problem with this card, after fresh install of xbian my wlan card is "found" i think but when I try scanning, It just show empty pop up with no wifi's on it. Could you tell me how can I fix it? I read this topic but here's so many solutions that i don't know which one to choose ....
EDIT: FIXED, by manualy typing ssid, wep pass, and others in SSH
RE: TP-Link TL-WN725N not recognized - m25 - 1st Jun, 2015 08:22 PM
might be an power issue
car servicing
RE: TP-Link TL-WN725N not recognized - camadas - 19th Jul, 2015 08:58 PM
(8th Jan, 2014 12:02 AM)mk01 Wrote: RFKILL means that the card has "switch" control as poweroff/on (as for instance WiFi or Bluetooth cards in notebooks have switches to power them up/down).
a solution is to install small rfkill control util "rfkill" and then
Code:
sudo -i
apt-get install rfkill
rfkill list
…
rfkill unblock XYZ
On this I get rfkill: /dev/rfkill no such file or directory :/
RE: TP-Link TL-WN725N not recognized - katesey - 31st May, 2017 04:45 PM
(5th May, 2013 12:37 AM)bergfruehling Wrote: Hi,
I bought a TP-Link TL-WN725N (listed on the supported hardware page in the wiki) for my RPi, but it is does not work. It is plugged into a powered usb hub (when I plugged it directly into the Pi, it restarted immediately, probably a power issue).
lsusb lists it as
Bus 001 Device 008: ID 0bda:8179 Realtek Semiconductor Corp.
after plugging it in, dmesg says
[ 1853.301279] usb 1-1.3.7: USB disconnect, device number 7
[ 1855.843529] usb 1-1.3.7: new high-speed USB device number 8 using dwc_otg
[ 1855.945063] usb 1-1.3.7: New USB device found, idVendor=0bda, idProduct=8179
[ 1855.945098] usb 1-1.3.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1855.945115] usb 1-1.3.7: Product: 802.11n NIC
[ 1855.945131] usb 1-1.3.7: Manufacturer: Realtek
[ 1855.945145] usb 1-1.3.7: SerialNumber: 00E04C0001
No modules are loaded automatically. I tried "modprobe 8192cu", but the result of replugging the stick was the same according to dmesg. There is no wifi device listed by ifconfig, nor by xbian-config. I use the lastest xbian with kernel 3.6.11+.
Any suggestions?
Cheers,
Henning
In the starting, It gave me some issues, however now, same adapter and it works with any Raspberry Pi distribution out of the box.
|