+- Forum (http://forum.xbian.org)
+-- Forum: CuBox-i / Hummingboard (/forum-66.html)
+--- Forum: Test builds (/forum-71.html)
+--- Thread: no NIC on newest nightly (/thread-2616.html)
no NIC on newest nightly - zarboz - 24th Dec, 2014 04:23 PM
http://sourceforge.net/projects/xbian/files/release/XBian_2014.12.04_CuBox-i.img.gz/download
No network on this build on hummingboard i2ex (runs any cubox build its from solidrun)
What kind of info can I attempt to supply for this issue so that I can help resolve... Openelec is lacking and I much prefer xbian
RE: no NIC on newest nightly - CurlyMo - 24th Dec, 2014 07:21 PM
Runs perfectly fine in production for three weeks here (LAN).
RE: no NIC on newest nightly - f1vefour - 24th Dec, 2014 08:28 PM
See my signature.
RE: no NIC on newest nightly - zarboz - 25th Dec, 2014 01:45 AM
(24th Dec, 2014 07:21 PM)CurlyMo Wrote: Runs perfectly fine in production for three weeks here (LAN).
Wich board do you have ?? the I2ex??
It seems to fail to obtain a DHCP lease from my router and doesnt work even if i set a static IP
::Edit::
Appears the build doesnt play nice with my wrt1900AC router... tried diff router and it picked a DHCP lease up ...
sorry for the n00bishness
RE: no NIC on newest nightly - CurlyMo - 25th Dec, 2014 06:40 AM
Ok, my answer would have been yes i have
RE: no NIC on newest nightly - zarboz - 25th Dec, 2014 06:55 AM
It appears it wont talk to a gigabit connection
I can try to pull logs off the hummingboard but since I boot off msata with a network connection this will be rather hard
standby while i pull my hair out gathering logs so I can continue to use my wrt1900ac (bada$$ router dont want to return it for something else going to a friends tonight to test his gigabit capable nighthawk r700 to see if the problem is replicable)
RE: no NIC on newest nightly - CurlyMo - 25th Dec, 2014 07:02 AM
Code:
root@pi ~ # ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: external
Auto-negotiation: on
Link detected: yesRE: no NIC on newest nightly - zarboz - 25th Dec, 2014 11:56 AM
(25th Dec, 2014 07:02 AM)CurlyMo Wrote:Code:
root@pi ~ # ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: external
Auto-negotiation: on
Link detected: yes
I have tried switching out ethernet cables I have tried switching everything i can think of other than my router (not an option since i dont own a second one) and still no matter what cable i use the router thinks nothing is connected
Thanks for humoring me I will keep attempting until i get this thing working
After flashing OpenWRT to my router the unit now picks up a gigabit DHCP lease...
odd the linksys stock "smart"wifi firmware would not accomplish this