Threaded Mode | Linear Mode

zarboz · 24th Dec, 2014, 04:23 PM

http://sourceforge.net/projects/xbian/files/release/XBian_2014.12.04_CuBox-i.img.gz/download

No network on this build on hummingboard i2ex (runs any cubox build its from solidrun)

What kind of info can I attempt to supply for this issue so that I can help resolve... Openelec is lacking and I much prefer xbian

CurlyMo · 24th Dec, 2014, 07:21 PM

Runs perfectly fine in production for three weeks here (LAN).

***f1vefour*** · 24th Dec, 2014, 08:28 PM

See my signature.

zarboz · 25th Dec, 2014, 01:45 AM

(24th Dec, 2014 07:21 PM)CurlyMo Wrote: Runs perfectly fine in production for three weeks here (LAN).

Wich board do you have ?? the I2ex??

It seems to fail to obtain a DHCP lease from my router and doesnt work even if i set a static IP

::Edit::
Appears the build doesnt play nice with my wrt1900AC router... tried diff router and it picked a DHCP lease up ...

sorry for the n00bishness

CurlyMo · 25th Dec, 2014, 06:40 AM

Ok, my answer would have been yes i have Smile

zarboz · 25th Dec, 2014, 06:55 AM

It appears it wont talk to a gigabit connection
I can try to pull logs off the hummingboard but since I boot off msata with a network connection this will be rather hard

standby while i pull my hair out gathering logs so I can continue to use my wrt1900ac (bada$$ router dont want to return it for something else going to a friends tonight to test his gigabit capable nighthawk r700 to see if the problem is replicable)

CurlyMo · 25th Dec, 2014, 07:02 AM

Code:

root@pi ~ # ethtool eth0

Settings for eth0:

        Supported ports: [ TP MII ]

        Supported link modes:   10baseT/Half 10baseT/Full

                                100baseT/Half 100baseT/Full

                                1000baseT/Full

        Supported pause frame use: Symmetric

        Supports auto-negotiation: Yes

        Advertised link modes:  10baseT/Half 10baseT/Full

                                100baseT/Half 100baseT/Full

                                1000baseT/Full

        Advertised pause frame use: Symmetric

        Advertised auto-negotiation: Yes

        Link partner advertised link modes:  10baseT/Half 10baseT/Full

                                             100baseT/Half 100baseT/Full

                                             1000baseT/Full

        Link partner advertised pause frame use: Symmetric Receive-only

        Link partner advertised auto-negotiation: Yes

        Speed: 1000Mb/s

        Duplex: Full

        Port: MII

        PHYAD: 0

        Transceiver: external

        Auto-negotiation: on

        Link detected: yes

zarboz · 25th Dec, 2014, 11:56 AM

(25th Dec, 2014 07:02 AM)CurlyMo Wrote:

Code:

root@pi ~ # ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: external Auto-negotiation: on Link detected: yes

I have tried switching out ethernet cables I have tried switching everything i can think of other than my router (not an option since i dont own a second one) and still no matter what cable i use the router thinks nothing is connected

Sad

Thanks for humoring me I will keep attempting until i get this thing working

After flashing OpenWRT to my router the unit now picks up a gigabit DHCP lease...
odd the linksys stock "smart"wifi firmware would not accomplish this