Threaded Mode | Linear Mode

alejandrovk · 12th Feb, 2013, 12:37 AM

Hi there!

Anybody knows how to disable sleep mode? I'm asking because if my RPi goes to sleep it never "wakes up", unless a do a hard reboot, which I really don't like.

Thanks!
Alex

Koenkk · 12th Feb, 2013, 12:38 AM

Do you mean the dimmed xbmc screensaver?

**rikardo1979** · 12th Feb, 2013, 12:49 AM

just change screenserver and also CEC settings to disable it

alejandrovk · 12th Feb, 2013, 06:36 PM

Hello Rikardo,

Not really sure but if I leave Xbian for a long time and try to come back again (through my TV), no matter what kind of input I use (mouse, keyboard) it won't wake. I then only have two options, ssh'in and reboot or hot unplug & plug. Thus, I suspect this is because it is going to sleep mode and not being able to wake up, and I want to disable that.

Regards,
Alex

**rikardo1979** · 12th Feb, 2013, 07:12 PM

please post your log file
look here for how to
http://forum.xbian.org/announcement-8.html

alejandrovk · 13th Feb, 2013, 03:41 AM

Hi again,

For some reason I'm not able to reproduce the issue now...get back here if problem arises again..

Thanks for your help,
Alex

Kevf · 27th May, 2013, 09:08 PM

I have the exact same problem....any news how to fix this?

**rikardo1979** · 27th May, 2013, 09:17 PM

(27th May, 2013 09:08 PM)Kevf Wrote: I have the exact same problem....any news how to fix this?

it wasn't an real issue as you can see the last report of the user above so there wasn't anything to fix.
However if you feel that there is one please read my posts above to try to fix it and also my post above where I asked for logs etc, so same apply to you Wink

-thx-

Kevf · 1st Jun, 2013, 10:26 PM

You're right, I was to quick to reply.

Using SSH I have now enabled

: HDMI ignore CEC init
: HDMI disable CEC

Hope this helps!

Kevf · 3rd Jun, 2013, 05:13 PM

It didn't work. This morning I switched on the the pi but I couldn't connect using Yatze. After that I switched on the tv: no screen.

I rebooted the pi by reconnecting it and after that it worked fine. I enabeld debugging, I turned off the tv again and switched off the pi with Yatze.

Than I turned on the the pi again, but this time I can connect with Yatze (with the tv off), but when I turn on the tv: no screen Sad

I can't help but think that it's somewhere in the cec settings/passtrough of my receiver.

The log didn't say anything unusual. But using the command in the link only gives you a part of the logging right?

logging after start-up (I know for sure it was different the first time)

Terminal

09:21:48 T:2887775296 DEBUG: JSONRPC: Calling application.getproperties
09:21:49 T:2887775296 DEBUG: webserver: request received for /jsonrpc
09:21:49 T:2887775296 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2. 0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Applica tion.GetProperties","params":{"properties":["volume","muted"]}}]
09:21:49 T:2887775296 DEBUG: JSONRPC: Calling player.getactiveplayers
09:21:49 T:2887775296 DEBUG: JSONRPC: Calling application.getproperties
09:21:51 T:2887775296 DEBUG: webserver: request received for /jsonrpc
09:21:51 T:2887775296 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2. 0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Applica tion.GetProperties","params":{"properties":["volume","muted"]}}]
09:21:51 T:2887775296 DEBUG: JSONRPC: Calling player.getactiveplayers
09:21:51 T:2887775296 DEBUG: JSONRPC: Calling application.getproperties
09:21:52 T:2887775296 DEBUG: webserver: request received for /jsonrpc
09:21:52 T:2887775296 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2. 0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Applica tion.GetProperties","params":{"properties":["volume","muted"]}}]
09:21:52 T:2887775296 DEBUG: JSONRPC: Calling player.getactiveplayers
09:21:52 T:2887775296 DEBUG: JSONRPC: Calling application.getproperties
09:21:54 T:2887775296 DEBUG: webserver: request received for /jsonrpc
09:21:54 T:2887775296 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2. 0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Applica tion.GetProperties","params":{"properties":["volume","muted"]}}]
09:21:54 T:2887775296 DEBUG: JSONRPC: Calling player.getactiveplayers
09:21:54 T:2887775296 DEBUG: JSONRPC: Calling application.getproperties
09:21:56 T:2887775296 DEBUG: webserver: request received for /jsonrpc
09:21:56 T:2887775296 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2. 0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Applica tion.GetProperties","params":{"properties":["volume","muted"]}}]
09:21:56 T:2887775296 DEBUG: JSONRPC: Calling player.getactiveplayers
09:21:56 T:2887775296 DEBUG: JSONRPC: Calling application.getproperties
09:21:57 T:2887775296 DEBUG: webserver: request received for /jsonrpc
09:21:57 T:2887775296 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2. 0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Applica tion.GetProperties","params":{"properties":["volume","muted"]}}]
09:21:57 T:2887775296 DEBUG: JSONRPC: Calling player.getactiveplayers
09:21:57 T:2887775296 DEBUG: JSONRPC: Calling application.getproperties
09:21:59 T:2887775296 DEBUG: webserver: request received for /jsonrpc
09:21:59 T:2887775296 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2. 0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Applica tion.GetProperties","params":{"properties":["volume","muted"]}}]
09:21:59 T:2887775296 DEBUG: JSONRPC: Calling player.getactiveplayers
09:21:59 T:2887775296 DEBUG: JSONRPC: Calling application.getproperties
[/term

]

Kevf · 4th Jun, 2013, 07:36 PM

Today I tried switching of HDMI control on the receiver but no luck. I came up with the idea to directly connect the hdmi cable to my plasma. But still a black screen. I can connect through windows explorer (network) and with putty. Yatze doesn't connect.

Most of the log is filled with directory/library errors, except for the first part:

Code:

00:00:29 T:3042926592  NOTICE: -----------------------------------------------------------------------

00:00:29 T:3042926592  NOTICE: Starting XBMC (12.0 Git:20130127-fb595f2), Platform: Linux (7.0, 3.6.11+ armv6l). Built on Jan 30 2013

00:00:29 T:3042926592  NOTICE: special://xbmc/ is mapped to: /usr/local/share/xbmc

00:00:29 T:3042926592  NOTICE: special://xbmcbin/ is mapped to: /usr/local/lib/xbmc

00:00:29 T:3042926592  NOTICE: special://masterprofile/ is mapped to: /home/xbian/.xbmc/userdata

00:00:29 T:3042926592  NOTICE: special://home/ is mapped to: /home/xbian/.xbmc

00:00:29 T:3042926592  NOTICE: special://temp/ is mapped to: /home/xbian/.xbmc/temp

00:00:29 T:3042926592  NOTICE: The executable running is: /usr/local/lib/xbmc/xbmc.bin

00:00:29 T:3042926592  NOTICE: Local hostname: xbian

00:00:29 T:3042926592  NOTICE: Log File is located: /home/xbian/.xbmc/temp/xbmc.log

00:00:29 T:3042926592  NOTICE: -----------------------------------------------------------------------

00:00:30 T:3042926592  NOTICE: load settings...

00:00:30 T:3042926592  NOTICE: special://profile/ is mapped to: special://masterprofile/

00:00:30 T:3042926592  NOTICE: loading special://masterprofile/guisettings.xml

00:00:30 T:3042926592  NOTICE: Getting hardware information now...

01:00:30 T:3042926592  NOTICE: Loading player core factory settings from special://xbmc/system/playercorefactory.xml.

01:00:30 T:3042926592  NOTICE: Loaded playercorefactory configuration

01:00:30 T:3042926592  NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml.

01:00:30 T:3042926592  NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping.

01:00:30 T:3042926592  NOTICE: Loaded settings file from special://xbmc/system/advancedsettings.xml

01:00:30 T:3042926592  NOTICE: Contents of special://xbmc/system/advancedsettings.xml are...

                                            <advancedsettings>

                                              <video>

                                                <defaultplayer>omxplayer</defaultplayer>

                                                <defaultdvdplayer>omxplayer</defaultdvdplayer>

                                              </video>

                                              <audio>

                                                <defaultplayer>omxplayer</defaultplayer>

                                                <streamsilence>false</streamsilence>

                                              </audio>

                                            </advancedsettings>

01:00:30 T:3042926592  NOTICE: Getting hardware information now...

01:00:30 T:3042926592  NOTICE: Loaded settings file from special://profile/advancedsettings.xml

01:00:30 T:3042926592  NOTICE: Contents of special://profile/advancedsettings.xml are...

                                            <advancedsettings>

                                              <network>

                                                <cachemembuffersize>20971520</cachemembuffersize>

                                              </network>

                                              <fanartres>540</fanartres>

                                              <imageres>256</imageres>

                                              <gputempcommand>echo &quot;$(/opt/vc/bin/vcgencmd measure_temp | grep -o &quot;[0-9]\{2\}&quot;) C&quot;</gputempcommand>

                                              <cputempcommand>echo &quot;$(/opt/vc/bin/vcgencmd measure_temp | grep -o &quot;[0-9]\{2\}&quot;) C&quot;</cputempcommand>

                                              <lookandfeel>

                                                <webserver>true</webserver>

                                                <guires>720</guires>

                                              </lookandfeel>

                                              <bginfoloadermaxthreads>2</bginfoloadermaxthreads>

                                              <video>

                                                <adjustrefreshrate>

                                                  <override>

                                                    <fps>23.976</fps>

                                                    <refresh>24.0</refresh>

                                                  </override>

                                                </adjustrefreshrate>

                                              </video>

                                            </advancedsettings>

01:00:30 T:3042926592  NOTICE: Getting hardware information now...

01:00:30 T:3042926592  NOTICE: Default DVD Player: omxplayer

01:00:30 T:3042926592  NOTICE: Default Video Player: omxplayer

01:00:30 T:3042926592  NOTICE: Default Audio Player: omxplayer

01:00:30 T:3042926592  NOTICE: Disabled debug logging due to GUI setting. Level 0.

01:00:30 T:3042926592  NOTICE: Log level changed to 0

01:00:30 T:3042926592  NOTICE: Loading media sources from special://masterprofile/sources.xml

01:00:30 T:3042926592  NOTICE: Running database version Addons15

[b]01:00:31 T:3042926592  NOTICE: Register - new cec device registered on rpi->RPI: Raspberry Pi CEC Adapter (2708:1001)[/b]

01:00:31 T:3032695872  NOTICE: Thread XBMC Peripherals start, auto delete: false

01:00:32 T:3042926592  NOTICE: Raspberry PI firmware version: Jan 26 2013 19:22:33 

                                            Copyright (c) 2012 Broadcom

                                            version 365344 (release)

01:00:32 T:3042926592  NOTICE: InitWindowSystem: Using EGL Implementation: raspberrypi

[b]01:00:32 T:3042926592  NOTICE: Found resolution 720 x 480 for display 0 with 720 x 480i @ 60.000000 Hz

01:00:32 T:3042926592  NOTICE: Found (720x480i@60.000000) at 16, setting to RES_DESKTOP at 16

01:00:32 T:3042926592  NOTICE: Checking resolution 16[/b]

01:00:32 T:3042926592  NOTICE: GL_VENDOR = Broadcom

01:00:32 T:3042926592  NOTICE: GL_RENDERER = VideoCore IV HW

01:00:32 T:3042926592  NOTICE: GL_VERSION = OpenGL ES 2.0

01:00:32 T:3042926592  NOTICE: GL_SHADING_LANGUAGE_VERSION = OpenGL ES GLSL ES 1.00

01:00:32 T:3042926592  NOTICE: GL_EXTENSIONS = GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_texture_npot GL_OES_depth24 GL_OES_vertex_half_float GL_OES_EGL_image GL_OES_EGL_image_external GL_EXT_discard_framebuffer GL_OES_rgb8_rgba8 GL_OES_depth32 GL_OES_mapbuffer GL_EXT_texture_format_BGRA8888 GL_APPLE_rgb_422 GL_EXT_debug_marker

01:00:34 T:3042926592   ERROR: Remote Translator: Can't find button mypvr

01:00:34 T:3042926592  NOTICE: Running database version Addons15

01:00:34 T:3042926592  NOTICE: Running database version ViewModes4

01:00:34 T:3042926592  NOTICE: Running database version Textures13

01:00:34 T:3042926592  NOTICE: Running database version MyMusic32

01:00:34 T:3042926592  NOTICE: Running database version MyVideos75

01:00:34 T:3042926592  NOTICE: Running database version TV22

01:00:34 T:3042926592  NOTICE: Running database version Epg7

01:00:34 T:3042926592  NOTICE: start dvd mediatype detection

01:00:34 T:3042926592  NOTICE: initializing playlistplayer

01:00:34 T:3042926592  NOTICE: DONE initializing playlistplayer

01:00:34 T:2980320320  NOTICE: Thread CDetectDVDMedia start, auto delete: false

01:00:35 T:3042926592 WARNING: CreateFile, successfuly opened </home/xbian/.xbmc/addons/skin.amber/1080i/defaults.xml> instead of </home/xbian/.xbmc/addons/skin.amber/1080i/Defaults.xml>

01:00:40 T:3042926592 WARNING: CreateFile, successfuly opened </home/xbian/.xbmc/addons/skin.amber/1080i/DialogSeekbar.xml> instead of </home/xbian/.xbmc/addons/skin.amber/1080i/DialogSeekBar.xml>

01:00:40 T:3042926592  NOTICE: special://xbmc/sounds/sounds.xml, Line 0

                                            Failed to open file

01:00:41 T:2943026240  NOTICE: Thread XBPyThread start, auto delete: false

01:00:41 T:3042926592  NOTICE: UpdateLibraries - Starting video library startup scan

01:00:41 T:3042926592  NOTICE: UpdateLibraries - Starting music library startup scan

01:00:41 T:2934371392  NOTICE: Thread CVideoInfoScanner start, auto delete: false

01:00:41 T:2925982784  NOTICE: Thread CMusicInfoScanner start, auto delete: false

01:00:41 T:3042926592  NOTICE: initialize done

01:00:41 T:2909205568  NOTICE: Thread XBPyThread start, auto delete: false

01:00:41 T:3042926592  NOTICE: Previous line repeats 1 times.

01:00:41 T:3042926592  NOTICE: Running the application...

01:00:42 T:2943026240  NOTICE: -->Python Interpreter Initialized<--

01:00:42 T:2909205568  NOTICE: -->Python Interpreter Initialized<--

01:00:42 T:2917594176  NOTICE: -->Python Interpreter Initialized<--

01:00:43 T:2897597504  NOTICE: Thread Jobworker start, auto delete: true

01:00:43 T:3042926592  NOTICE: Webserver: Starting...

01:00:43 T:3042926592  NOTICE: WebServer: Started the webserver

01:00:43 T:3042926592  NOTICE: starting upnp server

01:00:43 T:3042926592  NOTICE: ES: Starting event server

01:00:43 T:3042926592  NOTICE: starting zeroconf publishing

01:00:43 T:2821833792  NOTICE: Thread CEventServer start, auto delete: false

01:00:43 T:2821833792  NOTICE: ES: Starting UDP Event server on 0.0.0.0:9777

01:00:43 T:2821833792  NOTICE: UDP: Listening on port 9777

01:00:43 T:2813445184  NOTICE: Thread CTCPServer start, auto delete: false

01:00:43 T:2805056576  NOTICE: Thread Jobworker start, auto delete:

edit: extra info: I don't have the cec package installed. So how come that in the log a new cec device is registered?

I was thinking of maybe enabling HDMI hotplug, thoughts?

And another strange thing: I've got a 1080p hd tv, that doesn't corresponds with the resolution in the logging.

Kevf · 13th Jun, 2013, 12:49 AM

no one?

**rikardo1979** · 13th Jun, 2013, 02:01 AM

libcec is in by default so im not sure what have you messed with tbh Wink

My best recommendation for you is to start from scratch as it would be much easier

Isabel · 19th Jun, 2013, 04:19 AM

Thanks for this idea i never knew it was in screen saver's settings, anyway now I can disable this. Actually i want to have this active all time because some of my apps run all the time.

zilexa · 19th Jun, 2013, 07:28 PM

Hmm I might have a similar issue: when I am long away from the RPi (TV is off) and I turn the tv back on, the XBMC screen is dimmed. There is no screensaver, it's just the XBMC UI but its dimmed. I can do everything, everything still works.

But to get out of this dimmed screen mode, I need to play a video, then stop the video. Now my screen is correctly lit again.

I use CEC since I use my tv remote so I do not want to disable it. How to fix this?