beta2

[mk01]

(11th Sep, 2013 03:04 AM)anonimo200 Wrote:  @mk01
can you post your /run/upstart-ev.log ?

Before posting the log... Sometimes I mount NFS by ssh to copy files to/from my PC. When running the command it takes longer than in beta 1 to execute ( mount -t nfs 192.168.1.3:/shareddirectory /media/NFS )

there are some essentials for NFS which are making NFS possible and/or making some action take long or less. beta2 tries to adapt automatically, on boot rpcbind is started - always.

then /etc/fstab is reviewed for NFS or NFS4 mounts. if NFS is present, statd is started (provides remote locking), if NFS4 is found, idmapd and gssd is started.

if no NFS/NFS4 is in fstab, on first mount of NFS, statd will be started. for NFS4 idmapd nor gssd is essential, but mount will take longer.

this is the default.

if you want to force loading of any of statd, idmapd, gssd, edit /etc/default/nfs-common accordingly. Yes or No respectively will be fully recognized during start and forced.

my ups.log is (it's with PVR server, two ext usb disks, DVBT receiver and four network mounts - but default skin and shared DBs from MySQL extern):

5.78 0.69 job= event=xbian if= on_boot= rl= setup= 0.16 0.03 0.01 6/65 281
5.80 0.69 job=xbmc-failed-start event=started if= on_boot= rl= setup= 0.16 0.03 0.01 7/65 283
5.82 0.69 job=procps event=started if= on_boot= rl= setup= 0.16 0.03 0.01 7/64 282
6.00 0.69 job=hwclock.sh event=started if= on_boot= rl= setup= 0.16 0.03 0.01 4/61 292
6.05 0.69 job= event=not-container if= on_boot= rl= setup= 0.16 0.03 0.01 4/61 294
7.01 0.69 job=portmap event=started if= on_boot= rl= setup= 0.16 0.03 0.01 5/72 350
7.00 0.69 job=dbus event=started if= on_boot= rl= setup= 0.16 0.03 0.01 5/73 352
7.22 0.69 job=mountall event=started if= on_boot= rl= setup= 0.16 0.03 0.01 3/68 365
7.58 0.69 job=udev event=started if= on_boot= rl= setup= 0.16 0.03 0.01 6/77 395
8.09 0.69 job=idmapd event=started if= on_boot= rl= setup= 0.16 0.03 0.01 4/70 414
8.16 0.69 job=gssd event=started if= on_boot= rl= setup= 0.16 0.03 0.01 4/71 418
8.35 0.69 job= event=filesystem if= on_boot= rl= setup= 0.16 0.03 0.01 8/79 434
8.46 0.69 job=xbmc-preload event=started if= on_boot= rl= setup= 0.16 0.03 0.01 7/80 441
8.96 0.69 job=avahi-daemon event=started if= on_boot= rl= setup= 0.16 0.03 0.01 6/88 475
9.59 0.69 job= event=net-device-up if=eth0 on_boot= rl= setup= 0.16 0.03 0.01 7/86 526
9.61 0.69 job=xbmc event=starting if= on_boot= rl= setup= 0.16 0.03 0.01 8/86 531
9.70 0.69 job=network-interface event=started if=eth0 on_boot= rl= setup= 0.16 0.03 0.01 4/84 534
10.31 0.69 job= event=net-device-up if=lo on_boot= rl= setup= 0.63 0.13 0.04 7/99 583
10.67 0.69 job= event=static-network-up if= on_boot= rl= setup= 0.63 0.13 0.04 6/93 604
10.69 0.69 job=network-interface event=started if=lo on_boot= rl= setup= 0.63 0.13 0.04 6/91 606
10.94 0.69 job=xbian-net event=started if= on_boot= rl= setup= 0.63 0.13 0.04 4/91 625
11.03 0.69 job=mountall event=stopped if= on_boot= rl= setup= 0.63 0.13 0.04 4/88 629
13.16 0.69 job= event=startup if= on_boot=n rl= setup= 0.63 0.13 0.04 6/91 659
13.19 0.69 job=udevtrigger event=started if= on_boot= rl= setup= 0.63 0.13 0.04 6/91 660
13.27 0.69 job=xbian-net event=stopped if= on_boot= rl= setup= 0.63 0.13 0.04 4/89 663
13.31 0.69 job=module-init-tools event=stopped if= on_boot= rl= setup= 0.63 0.13 0.04 4/86 665
14.71 0.69 job= event=net-device-added if=eth0 on_boot= rl= setup= 0.63 0.13 0.04 10/101 738
15.20 0.69 job= event=net-device-added if=lo on_boot= rl= setup= 1.46 0.31 0.10 8/98 750
20.64 0.69 job=udevtrigger event=stopped if= on_boot= rl= setup= 1.58 0.36 0.12 5/179 1016
20.73 0.69 job=networking event=started if= on_boot= rl= setup= 1.58 0.36 0.12 5/181 1021
22.05 0.69 job=ntp event=started if= on_boot= rl= setup= 1.58 0.36 0.12 4/178 1069
32.90 0.69 job=xbmc-done event=started if= on_boot= rl= setup= 1.65 0.41 0.14 10/207 1166

---

anonimo200 Wrote:.

this is standard behavior of beta2. it is turning off the TV 5 minutes after XBMC started screensaver. you can edit the delay or turn it off / on by editing /etc/default/xbmc file. its like on normal PC. screensaver first, then power off.

cec-config was removed from upstream (from developer - the company which the CEC interface is building for raspberry).

---

(11th Sep, 2013 04:58 AM)Airwolfuk Wrote:  Question - is there anything/ recommendations for tweaks in advancedsettings?

I'm not using more than XBian is providing by default. this is it (without MySQL configs)

Code:

<advancedsettings>
   <fanartres>720</fanartres>
   <imageres>540</imageres>
   <gputempcommand>echo "$(/opt/vc/bin/vcgencmd measure_temp | grep -o "[0-9]\{2\}") C"</gputempcommand>
   <cputempcommand>echo "$(/opt/vc/bin/vcgencmd measure_temp | grep -o "[0-9]\{2\}") C"</cputempcommand>
   <lookandfeel>
        <webserver>true</webserver>
        <guires>1080</guires>
   </lookandfeel>
   <gui>
       <algorithmdirtyregions>3</algorithmdirtyregions>
       <nofliptimeout>0</nofliptimeout>
   </gui>
   <bginfoloadermaxthreads>2</bginfoloadermaxthreads>
   <video>
     <adjustrefreshrate>
       <override>
         <fps>23.976</fps>
         <refresh>24.0</refresh>
       </override>
     </adjustrefreshrate>
   </video>
<network>
<automount>false</automount>
<cachemembuffersize>1024000</cachemembuffersize>
</network>
<videolibrary>
  <dateadded>1</dateadded>
</videolibrary>

<musicextensions>
    <remove>.asd</remove>
</musicextensions>
<videoextensions>
    <remove>.rar</remove>
</videoextensions>

<pathsubstitution>
<substitute>
    <from>special://masterprofile/sources.xml</from>
    <to>/Network/Servers/media.private/xbmc/userdata/sources.xml</to>
</substitute>
<substitute>
    <from>special://masterprofile/mediasources.xml</from>
    <to>/Network/Servers/media.private/xbmc/userdata/mediasources.xml</to>
</substitute>
</pathsubstitution>
</advancedsettings>

---

(11th Sep, 2013 04:58 AM)Airwolfuk Wrote:  I do have real issues with xbian config in XBMC with wifi scanning and changing anything in the network area causes XBMC to sometimes (mostly) crash to the command prompt. I do not have any issues using xbian-config direct.

very very strange. can you turn on debug logging and send xbmc.log after the crash ?