[PROBLEM] Blank screen post one time successful boot on pi3

[Dave400]

(3rd Jun, 2016 06:49 PM)IriDium Wrote:  I would try reading the SD card on the PC. Obviously it won't be able to mount the btrfs volume but the boot partition should be readable. If all looks OK - long list of different files and not @ - then try rebooting again holding the shift key down.

If that doesn't work, can you post the config.txt and cmdline.txt files.

Boot partition mounts ok (with volume label xbianboot) all dtbs present for pi2 and pi3, kernel present along with start.elf.

I'll try booting with shift key held down later today, in the meantime content of the config and cmdline text files are:

config.txt

Code:

#initramfs initramfs.gz  0x1000000
gpu_mem_1024=256
gpu_mem_512=144
gpu_mem_256=100
initial_turbo=3
decode_MPG2=0x
decode_WVC1=0x
#overscan_left=40
#overscan_right=40
#overscan_top=25
#overscan_bottom=25
#overscan_left=95
#overscan_right=95
#overscan_top=85
#overscan_bottom=85
hdmi_ignore_cec_init=1
disable_overscan=1
disable_splash=1
dtoverlay=lirc-rpi
arm_freq=1000
core_freq=500
sdram_freq=500
over_voltage=2

cmdline.txt

Code:

telnet zswap.enabled=1 zswap.compressor=lz4 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,autodefrag,compress=lz4 rootfstype=btrfs rootwait logo.nologo quiet noswap loglevel=0 partswap startevent=mountall selinux=0 splash nohdparm --startup-event mountall