XBian_2021.02.19_rpi4 Playback Netflix crash

[rafhtl]

(27th Mar, 2021 03:37 AM)rafhtl Wrote:  

(20th Mar, 2021 12:38 AM)Nachteule Wrote:  

(19th Mar, 2021 05:03 PM)rafhtl Wrote:  

(12th Mar, 2021 12:17 AM)Nachteule Wrote:  Thanks. Positive feedback is always nice to hear

Thank you for your precious work!

I am testing extensively and I use same xbian (latest image) on RPI4 and RPI3b+

PVR IPTVSIMPLE works fine on both
BUT
on rpi3 when switching channels via up dwn it smoothly blacks screen between changing
WHILST ON
rpi4
I press up or down and old channel stays visible and flickers (annoying while next channel starts up
then everything is fine again
any suggestions?
thanks
raf

I have just set up the pvr iptvsimple for our free channels.
Works here with me absolutely flawless, no flickering or anything else recognizable

The picture of the old channel stays as long as the new channel continues, that's right

I'm using Settings->Player->Adjust display refresh rate->Start, what do you use?

I am using None
Let me try Start

---

(27th Mar, 2021 03:37 AM)rafhtl Wrote:  

(20th Mar, 2021 12:38 AM)Nachteule Wrote:  

(19th Mar, 2021 05:03 PM)rafhtl Wrote:  

(12th Mar, 2021 12:17 AM)Nachteule Wrote:  Thanks. Positive feedback is always nice to hear

Thank you for your precious work!

I am testing extensively and I use same xbian (latest image) on RPI4 and RPI3b+

PVR IPTVSIMPLE works fine on both
BUT
on rpi3 when switching channels via up dwn it smoothly blacks screen between changing
WHILST ON
rpi4
I press up or down and old channel stays visible and flickers (annoying while next channel starts up
then everything is fine again
any suggestions?
thanks
raf

I have just set up the pvr iptvsimple for our free channels.
Works here with me absolutely flawless, no flickering or anything else recognizable

The picture of the old channel stays as long as the new channel continues, that's right

I'm using Settings->Player->Adjust display refresh rate->Start, what do you use?

I am using None
Let me try Start

I have tried Start
(<setting id="videoplayer.adjustrefreshrate">3</setting>)
but same flickering
any other settings on player I might need to set different?
thank you

---

(27th Mar, 2021 03:37 AM)rafhtl Wrote:  

(20th Mar, 2021 12:38 AM)Nachteule Wrote:  

(19th Mar, 2021 05:03 PM)rafhtl Wrote:  

(12th Mar, 2021 12:17 AM)Nachteule Wrote:  Thanks. Positive feedback is always nice to hear

Thank you for your precious work!

I am testing extensively and I use same xbian (latest image) on RPI4 and RPI3b+

PVR IPTVSIMPLE works fine on both
BUT
on rpi3 when switching channels via up dwn it smoothly blacks screen between changing
WHILST ON
rpi4
I press up or down and old channel stays visible and flickers (annoying while next channel starts up
then everything is fine again
any suggestions?
thanks
raf

I have just set up the pvr iptvsimple for our free channels.
Works here with me absolutely flawless, no flickering or anything else recognizable

The picture of the old channel stays as long as the new channel continues, that's right

I'm using Settings->Player->Adjust display refresh rate->Start, what do you use?

I am using None
Let me try Start

---

(27th Mar, 2021 03:37 AM)rafhtl Wrote:  

(20th Mar, 2021 12:38 AM)Nachteule Wrote:  

(19th Mar, 2021 05:03 PM)rafhtl Wrote:  Thank you for your precious work!

I am testing extensively and I use same xbian (latest image) on RPI4 and RPI3b+

PVR IPTVSIMPLE works fine on both
BUT
on rpi3 when switching channels via up dwn it smoothly blacks screen between changing
WHILST ON
rpi4
I press up or down and old channel stays visible and flickers (annoying while next channel starts up
then everything is fine again
any suggestions?
thanks
raf

I have just set up the pvr iptvsimple for our free channels.
Works here with me absolutely flawless, no flickering or anything else recognizable

The picture of the old channel stays as long as the new channel continues, that's right

I'm using Settings->Player->Adjust display refresh rate->Start, what do you use?

I am using None
Let me try Start

I have tried Start
(<setting id="videoplayer.adjustrefreshrate">3</setting>)
but same flickering
any other settings on player I might need to set different?
thank you

<setting id="videoplayer.useprimedecoder" default="true">true</setting>
does fix the problem!
But I have other problems if I set that ...

ok
<setting id="videoplayer.useprimedecoder" default="true">true</setting>
<setting id="videoplayer.useprimedecoderforhw" default="true">true</setting>

with these set to true the problem seems solved
no flickering!
and
<setting id="videoplayer.adjustrefreshrate">3</setting>
thankyou

Will test now

The problem with these settings is that some streams NOT PVR will not open and even crash kodi...