[SOLVED] 3D & Projector

[Abshole]

Software
XBian version: 1.0 Beta 1.1
XBMC version:
Overclock settings: Default

Hardware
Power supply rating:
RPi model (model A/B 256mb/512mb): Model B
SD card size and make/type: Polaroid 32 GB CL10
Network (wireless or LAN): LAN
Connected devices (TV, USB, network storage, etc.): Pi to Onkyo TX-SR313, TX-SR313 to Projector (BenQ W1080ST)

Logile
Not sure if necessary, but this was when I was playing a half side by side, with "3dsbs" in the filename @ 1920x1080p resolution, unable to switch to SBS. http://pastebin.com/ueB4Gy0z

Problem description:
3D SBS films are not recognized by my projector which prevents me from being able to switch to SBS setting. I've tried putting "hsbs", "HSBS", "3DSBS", and "3dsbs" in the filename but still cannot switch. When setting the resolution to 960x1080 and playing a SBS film, the left half of the screen displays the image, but even that is cut in half. Films that are Top & Bottom get recognized and I'm able to switch to them with no problem. The configuration file is the default with 'hdmi_force_edid_3d=1' added onto the end.

On top of that, it seems any 1080p film plays for about 5 minutes then stutters for 5 seconds, only to repeat that process again and again.

Video Output
Resolution: 1920x1080p
Refresh: 60.0
Vertical Blank Sync: Let Driver Choose
LCD/VFD is off

Audio Output
Audio Output: HDMI
Speaker Config: 5.1