beta2 ongoing development
|
1st Aug, 2013, 08:12 AM
Post: #61
|
|||
|
|||
RE: beta2 ongoing development
No, there is no way to know if it's a TSOP4838 or something else. And somehow you did have the module manually loaded because it simply cannot work automatically. You must have forgot
pilight - modular domotica solution
|
|||
1st Aug, 2013, 08:24 AM
Post: #62
|
|||
|
|||
RE: beta2 ongoing development
Dont all GPIO receivers use lirc_rpi or do some use lirc_rp1? I could have simply forgotten that I added it to /etc/modules being it was originally on an alpha build upgraded to beta1.1 then beta2.
A note should be added to the wiki about GPIO receivers and loading the proper module with /etc/modules Please read rules and do a search before you post! | FAQs | How to post log file? | Can't find an answer? Contact us. |
|||
1st Aug, 2013, 09:00 AM
Post: #63
|
|||
|
|||
RE: beta2 ongoing development
Yes, all GPIO receivers use lirc_rpi. I created the additional lirc_rp1 module so you can have two different receivers connected as lirc sockets at once:
Code: crw-rw---T 1 root video 248, 0 jan 1 1970 /dev/lirc0 The lirc_rpi and the lirc_rp1 are besides the names exactly the same. pilight - modular domotica solution
|
|||
1st Aug, 2013, 09:22 AM
Post: #64
|
|||
|
|||
Re: RE: beta2 ongoing development
(1st Aug, 2013 09:00 AM)CurlyMo Wrote: Yes, all GPIO receivers use lirc_rpi. I created the additional lirc_rp1 module so you can have two different receivers connected as lirc sockets at once: Clever. I still wonder if I couldn't take a bit of the lirc_rpi driver code and create an application capable of recognizing an IR receiver from something else. Maybe when I get a free day or two I will try this, an lsgpio type application. Please read rules and do a search before you post! | FAQs | How to post log file? | Can't find an answer? Contact us. |
|||
1st Aug, 2013, 05:12 PM
Post: #65
|
|||
|
|||
RE: beta2 ongoing development
Just believe me, you can't and no-one can.
pilight - modular domotica solution
|
|||
1st Aug, 2013, 07:42 PM
Post: #66
|
|||
|
|||
RE: beta2 ongoing development
f1v4, can you test whether the tv off feature is working with you ? check /etc/default/xbmc config file for details.
Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
1st Aug, 2013, 11:53 PM
Post: #67
|
|||
|
|||
RE: beta2 ongoing development
From post #1
Quote:change /boot/cmdline.txt and update the snapshot name used to boot system. change "subvol=root/@" to "subvol=root/@beta2". If I'm running on a USB drive and have removed subvol=root/@ previously from cmdline. what should I do? a) move to next step? b) add subvol=root/@beta2 to cmdline c) ??? Kindest Regards UPDATE: Never mind. Having reread the posts and finding cmdline.txt.backup I figured this out. Rename cmdline.txt.backup to cmdline.txt. Change subvol=root/@" to "subvol=root/@beta2 |
|||
2nd Aug, 2013, 12:10 AM
(This post was last modified: 2nd Aug, 2013 12:11 AM by f1vefour.)
Post: #68
|
|||
|
|||
Re: RE: beta2 ongoing development
(1st Aug, 2013 07:42 PM)mk01 Wrote: f1v4, can you test whether the tv off feature is working with you ? check /etc/default/xbmc config file for details. I don't have an HDMI device. (1st Aug, 2013 05:12 PM)CurlyMo Wrote: Just believe me, you can't and no-one can. I will save myself the trouble and take your word on it. Please read rules and do a search before you post! | FAQs | How to post log file? | Can't find an answer? Contact us. |
|||
2nd Aug, 2013, 01:35 AM
Post: #69
|
|||
|
|||
RE: beta2 ongoing development
(1st Aug, 2013 11:53 PM)Uncle_Tubbie Wrote:Quote:change /boot/cmdline.txt and update the snapshot name used to boot system. change "subvol=root/@" to "subvol=root/@beta2". took me a while until I figured out what is going on, then realized the USB. yes, if you copied from sd to usb and changed rootfsopts= and root= and you want to use the sd card for tests, yes, you have to rollback the original settings, reboot into SD card, THEN create the beta2 snapshot and change cmdline.txt to boot from @beta2 instead of @. Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
2nd Aug, 2013, 06:23 AM
Post: #70
|
|||
|
|||
Re: beta2 ongoing development
Has xbian-package-xbmc really been updated twice today?
Please read rules and do a search before you post! | FAQs | How to post log file? | Can't find an answer? Contact us. |
|||
2nd Aug, 2013, 06:33 AM
Post: #71
|
|||
|
|||
RE: beta2 ongoing development
yes. in the morning as final state for beta2 and now I finished making the xbian-packages able to install as supplement to any debian installation. I suppose with small mods it can run on ubuntu and other debian clones and if someone converts the debs to rpms, even on fedora.
xbian-update was updated as well, but there we keep version the same, so you would need to run apt-get clean and install —reinstall it. But makes no difference for you, changes were not related to update over Xbian version. (I tested on stock minimal cd of Wheezy and Jessie). Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
2nd Aug, 2013, 06:43 AM
Post: #72
|
|||
|
|||
RE: beta2 ongoing development
i've tried , and except the btrf-tools version, thad i need to command the line like explain in previous post,
everything go right from a little tweak version of beta 1.1. Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
2nd Aug, 2013, 06:50 AM
Post: #73
|
|||
|
|||
Re: beta2 ongoing development
Since updating I have had xbmc crash twice while using plugins, I'm not home currently so can't post logs.
Please read rules and do a search before you post! | FAQs | How to post log file? | Can't find an answer? Contact us. |
|||
2nd Aug, 2013, 08:08 AM
Post: #74
|
|||
|
|||
RE: beta2 ongoing development
(2nd Aug, 2013 06:50 AM)f1vefour Wrote: Since updating I have had xbmc crash twice while using plugins, I'm not home currently so can't post logs. the best way you can do is log into rpi as xbian, do "cd" - or be sure your pwd is /home/xbian, then right away start xbmc manually - run "/usr/local/lib/xbmc/xbmc.bin —standalone" as soon as xbmc.bin crashes, it writes the error to std err, so you will see it. or check /var/log/upstart/xbmc.log. maybe will be there as well. because bins / scripts have not been changed during day, i can only assume some of the added dependencies (99% libs) is causing that - ok so if it is related at all. any specific add on to try for me? (2nd Aug, 2013 06:43 AM)belese Wrote: i've tried , and except the btrf-tools version, thad i need to command the line like explain in previous post, thanks belese for feedback. if possible, i would need to keep an eye on: 1) the tv off function with screensaver - if working ok, resuming working ok etc 2) configurations with wifi only (so eth0 not used) and please, hour ago I removed module resize from config-xbmc package, python was logging some errors causing xbmc to crash with return code 143. as we are not using it, just deleted the parts, reinstalled, but already twice found some strange errors in xbmc.log regarding missing ")" somewhere in "Addon.versions…". I'm not even sure it is related to this, it was the fresh Debian/Jessie install. So please just check the commit. Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
2nd Aug, 2013, 08:28 AM
Post: #75
|
|||
|
|||
Re: beta2 ongoing development
My initramfs got borked during the last update, I believe it may have been because I ran the upgrade as root instead of sudo.
I need a pointer on how to get xbian to boot back up? Please read rules and do a search before you post! | FAQs | How to post log file? | Can't find an answer? Contact us. |
|||
« Next Oldest | Next Newest »
|