USB Harddrive Not Mounting

[Lilone21804]

(24th Dec, 2013 01:48 AM)IriDium Wrote:  You are getting some weird USB error messages.

[ 40.155158] usb 1-1.3.4.1: device descriptor read/64, error -110
[ 40.345054] usb 1-1.3.4.1: new high-speed USB device number 9 using dwc_otg
[ 45.764753] usb 1-1.3.4.1: device not accepting address 9, error -71
[ 45.845293] usb 1-1.3.4.1: new high-speed USB device number 10 using dwc_otg
[ 51.264949] usb 1-1.3.4.1: device not accepting address 10, error –71
[ 401.544498] usb 1-1.3.4.1: Product: My Passport 0730

Which all relate to the WD

These could be due to a suspect hub. Do you have a spare that you could try?

What is the amperage of your RPi power supply?

You could try removing the HUB and plugging your KB and WD directly into the RPi – it might work just for testing.

Not sure if this helps, but her is my debug log:

http://xbmclogs.com/show.php?id=100607

[IriDium]

Not really - I need the information I requested otherwise I cannot help you

[Lilone21804]

(24th Dec, 2013 01:48 AM)IriDium Wrote:  You are getting some weird USB error messages.

[ 40.155158] usb 1-1.3.4.1: device descriptor read/64, error -110
[ 40.345054] usb 1-1.3.4.1: new high-speed USB device number 9 using dwc_otg
[ 45.764753] usb 1-1.3.4.1: device not accepting address 9, error -71
[ 45.845293] usb 1-1.3.4.1: new high-speed USB device number 10 using dwc_otg
[ 51.264949] usb 1-1.3.4.1: device not accepting address 10, error –71
[ 401.544498] usb 1-1.3.4.1: Product: My Passport 0730

Which all relate to the WD

These could be due to a suspect hub. Do you have a spare that you could try?

What is the amperage of your RPi power supply?

You could try removing the HUB and plugging your KB and WD directly into the RPi – it might work just for testing.

I can purchase another hub and see if that changes anything. The hub I'm using now is brand new.

The amperage of the RPi is 1.

[IriDium]

You could try removing the HUB and plugging your KB and WD directly into the RPi – it might work just for testing.

[Lilone21804]

(24th Dec, 2013 04:11 AM)IriDium Wrote:  You could try removing the HUB and plugging your KB and WD directly into the RPi – it might work just for testing.

Will there be enough power from the pi to support the WD?

[mk01]

at least to see one attempt to mount

[IriDium]

I have no idea, but it will eliminate or confirm my prognosis.

In my Beta2 all drives - no matter what they are mount perfectly.

---

What was the outcome of:You could try removing the HUB and plugging your KB and WD directly into the RPi – it might work just for testing.