Threaded Mode | Linear Mode

coloxim · 6th Jan, 2014, 10:38 AM

hi, after update from xbian conf, i am not able to accesso in xbian config again....
how can i fix it?

can I come back without reflash the immage (because is it already configurated with my personal parametre)?

thanks

mk01 · 7th Jan, 2014, 12:44 PM

are you referring to xbian-config text console application, or xbian-config as program addon in XBMC ?

coloxim · 7th Jan, 2014, 09:21 PM

(7th Jan, 2014 12:44 PM)mk01 Wrote: are you referring to xbian-config text console application, or xbian-config as program addon in XBMC ?

In console...I had never tried addon...a

mk01 · 7th Jan, 2014, 09:38 PM

you mean it is not starting automatically as you log as user xbian?

type

Code:

sudo xbian-config

navigate to settings -> xbian-config -> autorun

coloxim · 7th Jan, 2014, 11:01 PM

No..no...I mean if I digit sudo xbian-config, it doesnt work...
Didn't find the command...
After the update from xbian-config I've rebooted then raspberry and the command doesn't work more....

**IriDium** · 8th Jan, 2014, 02:32 AM

Can you provide the output from the command dmesg also a screenshot of the output from sudo xbian-config.

coloxim · 8th Jan, 2014, 10:57 PM

(8th Jan, 2014 02:32 AM)IriDium Wrote: Can you provide the output from the command dmesg also a screenshot of the output from sudo xbian-config.

hi...here the output..>

Code:

xbian@xbian ~ $ dmesg

[    0.000000] Booting Linux on physical CPU 0x0

[    0.000000] Initializing cgroup subsys cpuacct

[    0.000000] Linux version 3.10.18+ (root@media) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #68 Sat Nov 16 00:50:06 CET 2013

[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d

[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

[    0.000000] Machine: BCM2708

[    0.000000] Memory policy: ECC disabled, Data cache writeback

[    0.000000] On node 0 totalpages: 122880

[    0.000000] free_area_init_node: node 0, pgdat c04df014, node_mem_map c0534000

[    0.000000]   Normal zone: 960 pages used for memmap

[    0.000000]   Normal zone: 0 pages reserved

[    0.000000]   Normal zone: 122880 pages, LIFO batch:31

[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

[    0.000000] pcpu-alloc: [0] 0 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 121920

[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xf bcm2708.serial=0xdf6642ba smsc95xx.macaddr=B8:27:EB:66:42:BA sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,autodefrag,compress=lzo rootfstype=btrfs rootwait smsc95xx.turbo_mode=Y elevator=cfq logo.nologo quiet noswap loglevel=0 mod_scsi.scan=sync partswap startevent=mountall splash nohdparm --startup-event mountall

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] allocated 983040 bytes of page_cgroup

[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

[    0.000000] Memory: 480MB = 480MB total

[    0.000000] Memory: 475012k/475012k available, 16508k reserved, 0K highmem

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     vmalloc : 0xde800000 - 0xff000000   ( 520 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xde000000   ( 480 MB)

[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)

[    0.000000]       .text : 0xc0008000 - 0xc048bf2c   (4624 kB)

[    0.000000]       .init : 0xc048c000 - 0xc04ae004   ( 137 kB)

[    0.000000]       .data : 0xc04b0000 - 0xc04dfb00   ( 191 kB)

[    0.000000]        .bss : 0xc04dfb00 - 0xc0533dd8   ( 337 kB)

[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[    0.000000] NR_IRQS:330

[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms

[    0.000000] Switching to timer-based delay loop

[    0.000000] Console: colour dummy device 80x30

[    0.000000] console [tty1] enabled

[    0.000407] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)

[    0.000425] pid_max: default: 32768 minimum: 301

[    0.000676] Mount-cache hash table entries: 512

[    0.001333] Initializing cgroup subsys memory

[    0.001442] CPU: Testing write buffer coherency: ok

[    0.001783] Setting up static identity map for 0xc03fa090 - 0xc03fa0c8

[    0.002972] devtmpfs: initialized

[    0.014039] xor: measuring software checksum speed

[    0.110149]    arm4regs  :  1178.400 MB/sec

[    0.210198]    8regs     :   567.200 MB/sec

[    0.310244]    32regs    :   501.600 MB/sec

[    0.310259] xor: using function: arm4regs (1178.400 MB/sec)

[    0.310610] NET: Registered protocol family 16

[    0.315446] DMA: preallocated 4096 KiB pool for atomic coherent allocations

[    0.316456] bcm2708.uart_clock = 0

[    0.317532] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.

[    0.317548] hw-breakpoint: maximum watchpoint size is 4 bytes.

[    0.317560] mailbox: Broadcom VideoCore Mailbox driver

[    0.317628] bcm2708_vcio: mailbox at f200b880

[    0.317700] bcm_power: Broadcom power driver

[    0.317714] bcm_power_open() -> 0

[    0.317723] bcm_power_request(0, 8)

[    0.818378] bcm_mailbox_read -> 00000080, 0

[    0.818395] bcm_power_request -> 0

[    0.838314] bio: create slab <bio-0> at 0

[    1.000792] raid6: int32x1     46 MB/s

[    1.171273] raid6: int32x2     66 MB/s

[    1.341685] raid6: int32x4     88 MB/s

[    1.511479] raid6: int32x8    100 MB/s

[    1.511496] raid6: using algorithm int32x8 (100 MB/s)

[    1.511506] raid6: using intx1 recovery algorithm

[    1.512152] SCSI subsystem initialized

[    1.512368] usbcore: registered new interface driver usbfs

[    1.512451] usbcore: registered new interface driver hub

[    1.512663] usbcore: registered new device driver usb

[    1.514386] Switching to clocksource stc

[    1.525051] NET: Registered protocol family 2

[    1.526082] TCP established hash table entries: 4096 (order: 3, 32768 bytes)

[    1.526214] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)

[    1.526290] TCP: Hash tables configured (established 4096 bind 4096)

[    1.526379] TCP: reno registered

[    1.526402] UDP hash table entries: 256 (order: 0, 4096 bytes)

[    1.526433] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[    1.526824] NET: Registered protocol family 1

[    1.527315] RPC: Registered named UNIX socket transport module.

[    1.527336] RPC: Registered udp transport module.

[    1.527346] RPC: Registered tcp transport module.

[    1.527355] RPC: Registered tcp NFSv4.1 backchannel transport module.

[    1.527656] Unpacking initramfs...

[    2.324138] Freeing initrd memory: 5920K (c0a00000 - c0fc8000)

[    2.334874] bcm2708_dma: DMA manager at f2007000

[    2.334997] bcm2708_gpio: bcm2708_gpio_probe c04bc890

[    2.335383] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)

[    2.336285] audit: initializing netlink socket (disabled)

[    2.336369] type=2000 audit(2.330:1): initialized

[    2.346010] VFS: Disk quotas dquot_6.5.2

[    2.346327] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    2.348031] NFS: Registering the id_resolver key type

[    2.348125] Key type id_resolver registered

[    2.348141] Key type id_legacy registered

[    2.349642] bio: create slab <bio-1> at 1

[    2.351345] Btrfs loaded

[    2.351400] msgmni has been set to 939

[    2.353072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)

[    2.353097] io scheduler noop registered

[    2.353108] io scheduler deadline registered

[    2.353372] io scheduler cfq registered (default)

[    2.358766] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64

[    2.358785] crc32: self tests passed, processed 225944 bytes in 2583000 nsec

[    2.360751] crc32c: CRC_LE_BITS = 64

[    2.360763] crc32c: self tests passed, processed 225944 bytes in 952000 nsec

[    2.361095] BCM2708FB: allocated DMA memory 5c660000

[    2.361118] BCM2708FB: allocated DMA channel 0 @ f2007000

[    2.371518] Console: switching to colour frame buffer device 82x26

[    2.374655] vchiq: vchiq_init_state: slot_zero = 0xde804000, is_master = 0

[    2.375874] usbcore: registered new interface driver smsc95xx

[    2.376059] usbcore: registered new interface driver cdc_ncm

[    2.376081] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)

[    2.576306] Core Release: 2.80a

[    2.576336] Setting default values for core params

[    2.576382] Finished setting default values for core params

[    2.776453] Using Buffer DMA mode

[    2.776476] Periodic Transfer Interrupt Enhancement - disabled

[    2.776486] Multiprocessor Interrupt Enhancement - disabled

[    2.776498] OTG VER PARAM: 0, OTG VER FLAG: 0

[    2.776568] Dedicated Tx FIFOs mode

[    2.776786] dwc_otg: Microframe scheduler enabled

[    2.776840] dwc_otg bcm2708_usb: DWC OTG Controller

[    2.776893] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1

[    2.776969] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000

[    2.777008] Init: Port Power? op_state=1

[    2.777018] Init: Power Port (0)

[    2.777130] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[    2.777149] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[    2.777164] usb usb1: Product: DWC OTG Controller

[    2.777178] usb usb1: Manufacturer: Linux 3.10.18+ dwc_otg_hcd

[    2.777192] usb usb1: SerialNumber: bcm2708_usb

[    2.777887] hub 1-0:1.0: USB hub found

[    2.777932] hub 1-0:1.0: 1 port detected

[    2.778294] dwc_otg: FIQ enabled

[    2.778309] dwc_otg: NAK holdoff enabled

[    2.778319] dwc_otg: FIQ split fix enabled

[    2.778338] Module dwc_common_port init

[    2.778859] bcm2835-cpufreq: min=700000 max=840000 cur=700000

[    2.778967] bcm2835-cpufreq: switching to governor performance

[    2.778981] bcm2835-cpufreq: switching to governor performance

[    2.780144] sdhci: Secure Digital Host Controller Interface driver

[    2.780157] sdhci: Copyright(c) Pierre Ossman

[    2.780225] sdhci: Enable low-latency mode

[    2.824447] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA

[    2.824555] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77

[    2.824738] hidraw: raw HID events driver (C) Jiri Kosina

[    2.827006] usbcore: registered new interface driver usbhid

[    2.827020] usbhid: USB HID core driver

[    2.831641] NET: Registered protocol family 17

[    2.831788] Key type dns_resolver registered

[    2.832425] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5

[    2.841337] Freeing unused kernel memory: 136K (c048c000 - c04ae000)

[    2.885224] mmc0: new high speed SDHC card at address e624

[    2.886683] mmcblk0: mmc0:e624 SU16G 14.8 GiB 

[    2.888993]  mmcblk0: p1 p2 p3

[    2.975900] Indeed it is in host mode hprt0 = 00021501

[    3.050243] udevd[53]: starting version 175

[    3.294657] usb 1-1: new high-speed USB device number 2 using dwc_otg

[    3.294831] Indeed it is in host mode hprt0 = 00001101

[    3.965299] usb 1-1: New USB device found, idVendor=0424, idProduct=9512

[    3.965325] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    3.968243] hub 1-1:1.0: USB hub found

[    3.968514] hub 1-1:1.0: 3 ports detected

[    4.009194] device label xbian-beta2 devid 1 transid 408 /dev/mmcblk0p2

[    4.244836] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[    4.345100] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

[    4.345127] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[    4.348107] smsc95xx v1.0.4

[    4.412799] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:66:42:ba

[    4.494723] usb 1-1.2: new high-speed USB device number 4 using dwc_otg

[    4.596612] usb 1-1.2: New USB device found, idVendor=152d, idProduct=2338

[    4.596640] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5

[    4.596654] usb 1-1.2: Product: USB to ATA/ATAPI Bridge

[    4.596666] usb 1-1.2: Manufacturer: JMicron

[    4.596677] usb 1-1.2: SerialNumber: D57CA6613024

[    4.620806] usb-storage 1-1.2:1.0: USB Mass Storage device detected

[    4.621175] scsi0 : usb-storage 1-1.2:1.0

[    4.621641] usbcore: registered new interface driver usb-storage

[    4.694604] usb 1-1.3: new high-speed USB device number 5 using dwc_otg

[    4.795636] usb 1-1.3: New USB device found, idVendor=0ace, idProduct=1215

[    4.795663] usb 1-1.3: New USB device strings: Mfr=16, Product=32, SerialNumber=0

[    4.795677] usb 1-1.3: Product: USB2.0 WLAN

[    4.795689] usb 1-1.3: Manufacturer: ZyDAS

[    5.615844] scsi 0:0:0:0: Direct-Access     WDC WD20 00BB-00GUA0      2D08 PQ: 0 ANSI: 2 CCS

[    5.620392] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)

[    5.621266] sd 0:0:0:0: [sda] Write Protect is off

[    5.621299] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00

[    5.622147] sd 0:0:0:0: [sda] Asking for cache data failed

[    5.622176] sd 0:0:0:0: [sda] Assuming drive cache: write through

[    5.625009] sd 0:0:0:0: [sda] Asking for cache data failed

[    5.625040] sd 0:0:0:0: [sda] Assuming drive cache: write through

[    5.642875]  sda: sda1

[    5.647145] sd 0:0:0:0: [sda] Asking for cache data failed

[    5.647176] sd 0:0:0:0: [sda] Assuming drive cache: write through

[    5.647196] sd 0:0:0:0: [sda] Attached SCSI disk

[    5.658958] sd 0:0:0:0: Attached scsi generic sg0 type 0

[    6.299420] device label xbian-beta2 devid 1 transid 408 /dev/mmcblk0p2

[    6.441816] device label xbian-beta2 devid 1 transid 408 /dev/mmcblk0p2

[    6.446747] btrfs: enabling auto defrag

[    6.446784] btrfs: use lzo compression

[    6.446794] btrfs: disk space caching is enabled

[    6.477334] Btrfs detected SSD devices, enabling SSD mode

[    8.689801] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

[    8.928862] btrfs: disk space caching is enabled

[    9.029672] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[    9.072056] device label xbian-beta2 devid 1 transid 409 /dev/mmcblk0p2

[    9.123177] device label xbian-beta2 devid 1 transid 409 /dev/mmcblk0p2

[   10.286233] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1

[   11.115460] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[   11.655731] init: wait-for-state (zram-swapxbmc-done) main process (305) killed by TERM signal

[   11.688386] init: xbmc-failed-start main process (349) killed by TERM signal

[   12.814085] zram: module is from the staging directory, the quality is unknown, you have been warned.

[   12.846907] zram: Created 4 device(s) ...

[   13.061799] Adding 119804k swap on /dev/zram0.  Priority:20 extents:1 across:119804k SS

[   14.286363] Adding 251388k swap on /dev/mmcblk0p3.  Priority:0 extents:1 across:251388k SS

[   14.494075] init: failsafe main process (344) killed by TERM signal

[   15.517800] udevd[709]: starting version 175

[   17.949027] ------------[ cut here ]------------

[   17.949057] WARNING: at net/wireless/reg.c:434 0xbf0a214c()

[   17.949067] db.txt is empty, you should update it...

[   17.949076] Modules linked in: cfg80211(+) zram(C) frandom ext4 mbcache jbd2 sg usb_storage rpcsec_gss_krb5

[   17.949116] CPU: 0 PID: 822 Comm: modprobe Tainted: G         C   3.10.18+ #68

[   17.949125] Backtrace: 

[   17.949136] Function entered at [<c0011344>] from [<c00114d4>]

[   17.949147]  r6:bf0a214c r5:00000009 r4:dce5fdb0 r3:076e1ec5

[   17.949164] Function entered at [<c00114bc>] from [<c03f78d8>]

[   17.949174] Function entered at [<c03f78b8>] from [<c001d62c>]

[   17.949183] Function entered at [<c001d5d8>] from [<c001d6ec>]

[   17.949191]  r8:dce5e000 r7:bf0a02ec r6:bf0a02a4 r5:bf0a03c0 r4:bf0a0270

[   17.949191] r3:00000009

[   17.949212] Function entered at [<c001d6b4>] from [<bf0a214c>]

[   17.949220]  r3:00000000 r2:bf09e9b8

[   17.949230] Function entered at [<bf0a20d4>] from [<bf0a2060>]

[   17.949238]  r4:00000000

[   17.949246] Function entered at [<bf0a2000>] from [<c000868c>]

[   17.949254]  r5:bf0a02b0 r4:dce5ff48

[   17.949265] Function entered at [<c0008580>] from [<c00533ec>]

[   17.949274] Function entered at [<c00520c8>] from [<c00537e0>]

[   17.949284] Function entered at [<c0053700>] from [<c000e320>]

[   17.949292]  r6:b73b41f8 r5:00060000 r4:00000000

[   17.949305] ---[ end trace d400c529d663e466 ]---

[   17.949366] cfg80211: Calling CRDA to update world regulatory domain

[   18.495560] usb 1-1.3: reset high-speed USB device number 5 using dwc_otg

[   18.512968] device label xbian-beta2 devid 1 transid 409 /dev/mmcblk0p2

[   18.931830] ieee80211 phy0: Selected rate control algorithm 'pid'

[   18.933548] zd1211rw 1-1.3:1.0: phy0

[   18.933758] usbcore: registered new interface driver zd1211rw

[   20.426203] device label xbian-beta2 devid 1 transid 409 /dev/mmcblk0p2

[   20.816260] device label xbian-beta2 devid 1 transid 410 /dev/mmcblk0p2

[   23.036817] usb 1-1.3: Could not load firmware file zd1211/zd1211b_ub. Error number -2

[   23.036851] zd1211rw 1-1.3:1.0: couldn't load firmware. Error number -2

[   26.073064] frandom: Seeded global generator now (used by erandom)

[   26.122670] usb 1-1.3: Could not load firmware file zd1211/zd1211b_ub. Error number -2

[   26.122699] zd1211rw 1-1.3:1.0: couldn't load firmware. Error number -2

[   26.267276] usb 1-1.3: Could not load firmware file zd1211/zd1211b_ub. Error number -2

[   26.267309] zd1211rw 1-1.3:1.0: couldn't load firmware. Error number -2

[  371.882995] device label xbian-beta2 devid 1 transid 415 /dev/mmcblk0p2

[ 1678.217009] device label xbian-beta2 devid 1 transid 427 /dev/mmcblk0p2

[ 1679.420782] BTRFS debug (device mmcblk0p2): unlinked 2 orphans

[ 2580.471233] init: wait-for-state (xbmcxbmc-loaded) main process (5553) killed by TERM signal

[ 2637.712912] init: xbmc main process (5550) killed by TERM signal

[114363.996291] device label xbian-beta2 devid 1 transid 1816 /dev/mmcblk0p2

[114365.051431] BTRFS debug (device mmcblk0p2): unlinked 2 orphans

[114408.494163] device label xbian-beta2 devid 1 transid 1819 /dev/mmcblk0p2

[114415.908548] BTRFS debug (device mmcblk0p2): unlinked 2 orphans

[202195.739863] device label xbian-beta2 devid 1 transid 2983 /dev/mmcblk0p2

[202197.237647] BTRFS debug (device mmcblk0p2): unlinked 2 orphans

[202408.300438] device label xbian-beta2 devid 1 transid 2991 /dev/mmcblk0p2

[202412.546540] BTRFS debug (device mmcblk0p2): unlinked 2 orphans

never mind.....now it works...
i relly don-t know why and how now works....

sorry guys...

thanks for help anyway,.......

**IriDium** · 9th Jan, 2014, 02:11 AM

I would look at
1) Power supply for the RPi - Must be 1amp or more
2) Power to the USB HUB.
3) Your SD card.

All the indications seem to point at one of the three

coloxim · 9th Jan, 2014, 08:02 AM

Problem again...tree point is OK...but when I start xbmc

Maybe I because I've disable xbmc service and starts it manually?

**IriDium** · 10th Jan, 2014, 03:44 AM

Ok - Back to basics.

Can you provide the information requested in Please read before you post - a link is in my signature.

coloxim · 10th Jan, 2014, 10:28 AM

(10th Jan, 2014 03:44 AM)IriDium Wrote: Ok - Back to basics.

Can you provide the information requested in Please read before you post - a link is in my signature.

ok....when i'm at home i will ....

edit...

i've tried again and now works...io really dont know i didn't touch nothing...tomorrow i'll try again ...I have to give you the log anyway?

it is strange....

coloxim · 16th Jan, 2014, 07:16 AM

Ill put my configuration and log
But for now I have this...

mk01 · 16th Jan, 2014, 12:03 PM

@coloxim

this was bug - appeared 1:10 boots and not for all users.

if you update packages, should be fixed.

Code:

sudo -i

apt-get update

apt-get upgrade

or you wish to upgrade through xbian-config, for this case run:

Code:

sudo -i

mkdir /run/lock; chmod 1777 /run/lock

now you should be able to run xbian-config.

coloxim · 19th Jan, 2014, 11:50 PM

(16th Jan, 2014 12:03 PM)mk01 Wrote: @coloxim

this was bug - appeared 1:10 boots and not for all users.

if you update packages, should be fixed.

Code:

sudo -i apt-get update apt-get upgrade

or you wish to upgrade through xbian-config, for this case run:

Code:

sudo -i mkdir /run/lock; chmod 1777 /run/lock

now you should be able to run xbian-config.

Thanks I'll try...I'm a bit busy last times...
I was updated when I had got bug...

When I'm connect to Ethernet and dont connect raspy to tv I haven't bug....bug when I'm using WiFi key and connect the tv the bug come back...

I'll try update like you said...

I'll report back..

Wink