Doesn't boot after apt-get upgrade
|
29th Jun, 2014, 10:27 PM
Post: #1
|
|||
|
|||
Doesn't boot after apt-get upgrade
I'm trying to configure a working setup of xbian with a USB TV Tuner - and ran apt-get upgrade from Xbian 1.0 RC2.
The update seemed to be fine, however after rebooting it just stays on the red light with a underscore '_' cursor at the top of the screen. Really hope there is a solution to this, I have spent hours configuring XBMC and addons - don't want to do it again! |
|||
30th Jun, 2014, 04:16 AM
Post: #2
|
|||
|
|||
RE: Doesn't boot after apt-get upgrade
Xbian provides two excellent backup solutions. Whole image and Home backup. I guess you didn't use any of these?
See if you can read the /boot directory from the SD card - Windoze, MAc or Linux and post the output from config.txt and cmdline.txt Please read before you post How to post a log file If you liked my help, click on "Thanks" to show your appreciation.
|
|||
30th Jun, 2014, 07:17 AM
Post: #3
|
|||
|
|||
RE: Doesn't boot after apt-get upgrade
I backed up my XBMC settings. Is there a way to back up /etc/ or copy from the SD card from a linux install? If of course this SD card is no rescuable...
I have tried disabling splash and changing the overclock as well to not effect... My cmdline.txt Quote:telnet zswap.enabled=1 zswap.compressor=lz4 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,thread_pool=2,autodefrag,compress=lzo,commit=120 rootfstype=btrfs rootwait smsc95xx.turbo_mode=N elevator=cfq logo.nologo quiet noswap loglevel=0 mod_scsi.scan=sync partswap startevent=mountall splash nohdparm --startup-event mountall My [modified] config.txt Quote:initramfs initramfs.gz 0x0a000000 Also a screenshot of the file on the boot section http://gyazo.com/dd1ae0b2de22355a1424f9e1e57c167e |
|||
30th Jun, 2014, 09:03 PM
Post: #4
|
|||
|
|||
RE: Doesn't boot after apt-get upgrade
Try... Make a backup of config.txt and cmdline.txt
1) Add debug to cmdline.txt, reboot and see what appears. 2) Add rescue to cmdline.txt, reboot and view dmesg 3) Remove initramfs... from config.txt, reboot and see what happens. Please read before you post How to post a log file If you liked my help, click on "Thanks" to show your appreciation.
|
|||
1st Jul, 2014, 12:22 AM
Post: #5
|
|||
|
|||
RE: Doesn't boot after apt-get upgrade
(30th Jun, 2014 09:03 PM)IriDium Wrote: Try... Make a backup of config.txt and cmdline.txt The first two didn't do anything but... Superb after deleting 'initramfs initramfs.gz 0x0a000000' - The pi boots up correctly and into Xbian/XBMC. Thank you! Is there anything I need to do now (apart from another good backup) ? |
|||
1st Jul, 2014, 01:02 AM
Post: #6
|
|||
|
|||
RE: Doesn't boot after apt-get upgrade
Great - it worked. No, that should be all, obviously remove all other changes you made to config.txt and cmdline.txt.
Also change gpu_mem_256=100 and gpu_mem_512=128 One can never have enough backups :-) Please read before you post How to post a log file If you liked my help, click on "Thanks" to show your appreciation.
|
|||
2nd Jul, 2014, 07:56 AM
Post: #7
|
|||
|
|||
RE: Doesn't boot after apt-get upgrade
and RECREATE initramfs.gz with command:
Code: sudo -i Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
4th Jul, 2014, 02:18 AM
Post: #8
|
|||
|
|||
RE: Doesn't boot after apt-get upgrade
Thanks so much guys, I owe you both a big thank you.
Only problem is with the sudo -i + xbian-update-initramfs, it generates the new initramfs then on reboot it has the original problem of not being able to boot. |
|||
4th Jul, 2014, 02:24 AM
Post: #9
|
|||
|
|||
RE: Doesn't boot after apt-get upgrade
@Ali3n0id
this one is sorted out with latest initramfs-tool package (1.3.4-12). the problem was in the memory segment where initramfs is loaded. it must have been changed with firmware RPI or kernel... simply address we used for months just stopped to work (rpi doesn't boot). try edit config.txt change the hexa number on first line to 0x1000000. this is what works for my tests. if not for you report it back and comment that line (put # at beggining). that should be the only problem. Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
21st Jul, 2014, 02:53 AM
Post: #10
|
|||
|
|||
RE: Doesn't boot after apt-get upgrade
Okay as in
'initramfs initramfs.gz 0x1000000' Or '0x1000000' Also I want to transfer xbian to a USB2 Hard Drive I tried to write an .img file and left it for 24 Hours and it still hasn't completed so I'm guessing this SD card is awfully slow. What's the easiest way to transfer XBian to a 500GB Hard Drive? via xbian-config? |
|||
6th Aug, 2014, 11:20 AM
Post: #11
|
|||
|
|||
RE: Doesn't boot after apt-get upgrade
@Ali3n0id
yes, use the copier from xbian-config ((there have been issues with various kernel versions, or the tool itself etc - be sure you have newest possible kernel (I would prefer 3.15.6+ from staging and actual xbian-pakcage-config-shell)) Please read rules and do a search before you post! . FAQs . How to post log file? . Looking for answers? Please start here |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread: | Author | Replies | Views: | Last Post | |
[PROBLEM] xbian-config "upgrade all available" doesn't | CountZero | 1 | 5,039 |
16th May, 2015 04:09 AM Last Post: CurlyMo |