Solved: Update Problem latest version
|
26th Feb, 2016, 02:59 PM
Post: #1
|
|||
|
|||
Update Problem latest version
Morning Xbian Com,
first of all I am sorry for you, because you gone read the worst Englisch of your life but i gone try my best. So I got a Problem with Upgrading my Rasp 2 with Kodi 15.2 Isengard to Kodi 16.0 Jarvis. I try many steps/ways to solve the problem by my own but nothing works and now i have no idea what to do next(please notice that my Linux knowledge is... well I got no knowledge on Linux command to be honestly. I dont even know how to move throw Files and what even this "sudo" command means) 1st try) I logged with Putty on my Rasp and then i try the command sudo apt-get upgrade but this dont helped me alot. It load something called jessie but my Version of Kodi stay on 15.2 and the sudo apt-get update say 0 Updates to install 2nd) I try straight over Kodi on the Xbian Section on the Settings menu but this didnt work too. 3rd) I load from the Website the latest img called XBian_2016.02.21_rpi2 and put it with the Windows Installer on the SD Card but version stay on 15.2 4) Then i try to install it with the Android method and add the source mirrors.kodi.tv/releases/arm/ but ofc this aint work too 5.) I try the Kodibutnu method but this aint work too. You see i try many things before I open a thread. But now I dont have any idea left that I can make to update Kodi to the latest version, so I hope that someone can help me with the Problem |
|||
27th Feb, 2016, 12:35 AM
Post: #2
|
|||
|
|||
RE: Update Problem latest version
Our latest release of Kodi Jarvis has not been put to stable repository. To get it, you have to do follwing steps
1) Enable staging repo in file /etc/apt/sources.list.d/xbian.list by sudo nano /etc/apt/sources.list.d/xbian.list and uncomment the staging line. The file should then be like this: Code: deb mirror://apt.xbian.org/mirror.txt stable main rpi2-jessie 2) sudo stop xbmc 3) sudo apt-get update This will refresh repositories 4) sudo apt-get upgrade This will update at least the xbian-package-xbmc and some cec packages 5) sudo start xbmc |
|||
27th Feb, 2016, 04:01 PM
Post: #3
|
|||
|
|||
RE: Update Problem latest version
Thank you very much for your Guide
it took me a while to find how to save the uncomment text on the nano Editor but after that it upgrades fine to 16.0. Thank you Nachteule |
|||
29th Feb, 2016, 05:57 AM
Post: #4
|
|||
|
|||
RE: Update Problem latest version
Greetings!
I'm trying to migrate from OpenELEC and having some trouble with upgrades. The last imx6 image was XBian_2016.02.06_imx6.img.gz on 2016-02-06. It installs fine (but doesn't recognize my remote), and when I run upgrades (Update All) from within Xbian, it won't boot afterwards. Just a black screen. Is there a repo that can be enabled to make the upgrade work like the rpi2-jessie solution above or will/can we get a new imx6 build for Cubox-i/Hummingboard soon? Any advice would be helpful. Thanks! |
|||
29th Feb, 2016, 08:18 AM
Post: #5
|
|||
|
|||
RE: Update Problem latest version
It can be done exactly like the RPi2 (the difference is the repo: rpi2 for RPi2, imx6 for Cubox-i/Hummingboard)
Does your Cubox-i boot after a power-off? |
|||
29th Feb, 2016, 08:52 AM
Post: #6
|
|||
|
|||
RE: Update Problem latest version
(29th Feb, 2016 08:18 AM)Nachteule Wrote: Does your Cubox-i boot after a power-off? After I upgrade, no. After the upgrade, it says a reboot is necessary, so I do, then nothing. I pull the power cord, plug the power back in and it's just a black screen. The red light is on and the external drive spins up, but nothing on the screen. It just doesn't boot at all. |
|||
29th Feb, 2016, 10:31 AM
Post: #7
|
|||
|
|||
RE: Update Problem latest version
hmm, wtf
If once you get it booting, please install the previous kernel 4.3.x. Seems that kernel 4.4.x has serious problems on cubox-i One user reported on IRC (having similar problems) that he is able to boot the cubox-i after doing an e2fsck from the boot partition. Could you please try this? |
|||
29th Feb, 2016, 11:26 AM
Post: #8
|
|||
|
|||
RE: Update Problem latest version
(29th Feb, 2016 10:31 AM)Nachteule Wrote: If once you get it booting, please install the previous kernel 4.3.x. Seems that kernel 4.4.x has serious problems on cubox-i If I use the installer and boot without upgrading, it works pretty well (except for my remotes). If I upgrade, it's toast. There's no rolling back to another kernel. Quote:One user reported on IRC (having similar problems) that he is able to boot the cubox-i after doing an e2fsck from the boot partition. Could you please try this? How would I go about doing that? I'm not a complete noob, but I'm also not terribly advanced, so basic instructions should do it. I'm just more familiar with how OpenELEC does things with their partition(s) and such. Also, the cubox-i is connected to a television, so I'd have to SSH/Putty in to do anything. Thanks. |
|||
29th Feb, 2016, 12:30 PM
Post: #9
|
|||
|
|||
RE: Update Problem latest version
To do this it is necessary to connect the sd card directly to your linux pc (by an usb sd-card reader)
On the sd card there are 3 partitions: 1: ext2 boot partition 2. btrfs root partition 3. swap partition from your computer run e2fsck /dev/sdX1 (X is the device letter from the sd card, use fdisk -l to figure out which is the right one) I removed the 4.4 kernel from the stable repo, so upgrading should be save now |
|||
29th Feb, 2016, 11:20 PM
Post: #10
|
|||
|
|||
RE: Update Problem latest version
In this scenario - kodi is running but not being displayed - restarting the service shows the background and the cursor in the top left corner but nothing else.
I did notice that OE are no longer supplying updates to cubox-i because of an issue just like this - not being compatible with the new kernel. e2fsck on /xbianboot showed as clean. Didn't make any difference on booting. Everything seemed to be fine before the upgrade. So will "redo from start" just not upgrade the kernel. Everything seems to work Ok from "staging" - Jarvis - just stayed on kernel 4.3.3 Please read before you post How to post a log file If you liked my help, click on "Thanks" to show your appreciation.
|
|||
1st Mar, 2016, 05:53 AM
Post: #11
|
|||
|
|||
RE: Update Problem latest version | |||
1st Mar, 2016, 10:44 AM
Post: #12
|
|||
|
|||
RE: Update Problem latest version
I didn't have to change anything. I loaded the imx6 image from the Downloads section, booted up, connected to WiFi, ran updates and rebooted with no problem (since you removed the 4.4 kernel). Now to get the remote working...
|
|||
3rd Mar, 2016, 06:21 AM
Post: #13
|
|||
|
|||
RE: Update Problem latest version
Rut ro... My cubox just updated and uname -a now says:
Code: Linux xbian 4.4.3+rt+ #1 SMP PREEMPT RT Wed Mar 2 13:32:44 CET 2016 armv71 GNU/Linux I'm remoting in from work and SSH works, but I can't see the screen so I don't know if Kodi is actually being displayed or not. Did the 4.4.x kernel with cubox issue get resolved since Natchtuele removed 4.4 from the stable repo? |
|||
3rd Mar, 2016, 06:35 AM
Post: #14
|
|||
|
|||
RE: Update Problem latest version
There are some updates in u-boot code, so probably the issue is solved
You can simply check if kodi runs by doing a Code: sudo status xbmc |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread: | Author | Replies | Views: | Last Post | |
[PROBLEM] Latest update has broken Kodi | Baz8755 | 17 | 42,648 |
25th Aug, 2015 07:26 PM Last Post: syco |
|
[SOLVED] Update latest version Kodi and settings were gone... | Exnor | 25 | 87,028 |
2nd Mar, 2015 07:37 PM Last Post: Skywatch |
|
[PROBLEM] How to successfully update 1.0a3 to latest release? | mixpc | 1 | 10,039 |
30th Mar, 2013 04:04 PM Last Post: mixpc |