hauppauge tuner/receiver

[pootler]

hello - new to the forum.

I would like to try xbian after using openelec.

On openelec everything seemed to be working although it is a little sluggish.

When i power up xbian using all the same hardware, the software does not seem to recognise my hauppauge dvb-t tuner.
Consequently I have no remote control to try xbian out - as the tuner has its own built in ir receiver ( MCE) For some reason it works OOB with openelec?

Forgive my noobness, but any ideas!?http://forum.xbian.org/images/smilies/blush.gif

many thanks

keith

[CurlyMo]

Can you post the output of lsmod on OpenElec to know what modules are needed for that device?

[pootler]

i'll try?


thanks

keith

[pootler]

(3rd Feb, 2013 05:59 PM)CurlyMo Wrote:  Can you post the output of lsmod on OpenElec to know what modules are needed for that device?

Hopefully, this is what you mean

Module Size Used by
uinput 6242 0
rc_dib0700_rc5 1983 0
dvb_usb_dib0700 91612 58
dib0090 22241 1 dvb_usb_dib0700
dib7000p 25463 3 dvb_usb_dib0700
dib7000m 13692 1 dvb_usb_dib0700
dib0070 7114 3 dvb_usb_dib0700
dvb_usb 15483 1 dvb_usb_dib0700
dib8000 37467 1 dvb_usb_dib0700
dvb_core 84867 3 dib8000,dvb_usb,dib7000p
dib3000mc 10334 1 dvb_usb_dib0700
iptable_nat 2665 0
nf_nat 11924 1 iptable_nat
nf_conntrack_ipv4 6627 3 nf_nat,iptable_nat
nf_defrag_ipv4 908 1 nf_conntrack_ipv4
ip_tables 9544 1 iptable_nat
rc_core 11891 4 dvb_usb,dvb_usb_dib0700,rc_dib0700_rc5
dibx000_common 6346 5 dib8000,dvb_usb_dib0700,dib3000mc,dib7000m,dib7000p
root ~ #

look forward to your response

keith

[CurlyMo]

First of all, use our markup code, so edit your post to fix it.

---

All modules you need are (at least) included (in Alpha 5). So try:

Code:

modprobe dvb_usb_dib0700
modprobe dib0090
modprobe dib7000p
modprobe dib7000m
modprobe dib0070
modprobe dvb_usb
modprobe dib8000
modprobe dvb_core
modprobe dib3000mc
modprobe dibx000_common

No output after a modprobe is success. Then run lsmod to check if all modules are loaded.