hifiberry-digi on pi4 not working.....
|
9th Jan, 2021, 07:52 AM
Post: #1
|
|||
|
|||
hifiberry-digi on pi4 not working.....
I just did my first upgrade in a while.
![]() ... and I cannot get the digi recognised on pi4 (01.01.21) ![]() aplay -l gives no available devices. The device was working on pi3 before I moved it across. I managed to install alsa-utils fine, but get an error when trying to install alsa-base (no available candidate) = Also get the same trying to install yarc, but that's another thing I think ![]() So what's changed with pi4 and how should I proceed from here? |
|||
9th Jan, 2021, 09:55 PM
Post: #2
|
|||
|
|||
RE: hifiberry-digi on pi4 not working.....
I even reinstalled pulseaudio to see if that was an issue, but problem persists
![]() DMESG gives the following clues...... Terminal [ 5.711461] snd-rpi-wm8804 soc:sound: ASoC: failed to init link HifiBerry Dig i: -517 [ 5.743959] videodev: Linux video capture interface: v2.00 [ 5.781492] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned. [ 5.806581] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned. [ 5.806758] snd-rpi-wm8804 soc:sound: ASoC: failed to init link HifiBerry Dig i: -517 [ 5.812081] bcm2835_v4l2: module is from the staging directory, the quality i s unknown, you have been warned. [ 5.813362] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 5.822480] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 5.841297] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 5.841324] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 6.036516] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase [ 6.096355] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 6.099756] snd-rpi-wm8804 soc:sound: ASoC: failed to init link HifiBerry Dig i: -517 [ 6.182882] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.186320] platform regulatory.0: Direct firmware load for regulatory.db fai led with error -2 [ 6.186333] cfg80211: failed to load regulatory.db [ 6.276984] snd-rpi-wm8804 soc:sound: ASoC: failed to init link HifiBerry Dig i: -517 [ 6.277779] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 6.284459] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6 [ 6.288641] usbcore: registered new interface driver brcmfmac [ 6.288958] snd-rpi-wm8804 soc:sound: ASoC: failed to init link HifiBerry Dig i: -517 [ 6.297367] wm8804 1-003b: Failed to read device ID: -121 [ 6.297672] wm8804: probe of 1-003b failed with error -121 [ 6.297876] snd-rpi-wm8804 soc:sound: ASoC: failed to init link HifiBerry Dig i: -517 wm8804 is being reported so I checked with lsmod | grep wm8804 Terminal xbian@Cinema4Film ~ $ sudo lsmod | grep wm8804 snd_soc_wm8804_i2c 16384 0 snd_soc_wm8804 16384 1 snd_soc_wm8804_i2c regmap_i2c 16384 1 snd_soc_wm8804_i2c snd_soc_rpi_wm8804_soundcard 20480 0 snd_soc_core 172032 4 snd_soc_rpi_wm8804_soundcard,snd_soc_wm8804,vc4,snd_soc_bcm2835_i2s snd_pcm 86016 6 snd_soc_wm8804,vc4,snd_pcm_dmaengine,snd_soc_bcm2835_i2s,snd_bcm2835,snd_soc_core Not sure how this is happening as etc/modules has the following.... Terminal # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. uinput #snd-bcm2835 #snd_soc_pcm5102a snd_soc_hifiberry_dac snd_soc_bcm2708 snd_soc_bcm2708_i2s bcm2708_dmaengine #snd_soc_pcm5102a <---This one must be commented out. snd_soc_hifiberry_digi #snd-soc-wm8804 i2c-bcm2708 i2c-dev and etc/modules.xbian has the following... Terminal # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. # Parameters can be specified after the module name. #snd_bcm2835 lsmod Terminal xbian@Cinema4Film /etc $ lsmod Module Size Used by cpufreq_conservative 16384 1 snd_bcm2835 28672 0 zram 24576 1 zsmalloc 24576 1 zram bnep 28672 2 hci_uart 49152 1 btbcm 16384 1 hci_uart serdev 20480 1 hci_uart bluetooth 454656 24 hci_uart,bnep,btbcm ecdh_generic 16384 1 bluetooth ecc 32768 1 ecdh_generic snd_soc_wm8804_i2c 16384 0 snd_soc_wm8804 16384 1 snd_soc_wm8804_i2c regmap_i2c 16384 1 snd_soc_wm8804_i2c brcmfmac 286720 0 brcmutil 20480 1 brcmfmac sha256_generic 16384 0 libsha256 20480 1 sha256_generic vc4 221184 3 evdev 24576 1 cec 40960 1 vc4 cfg80211 581632 1 brcmfmac snd_soc_rpi_wm8804_soundcard 20480 0 v3d 53248 1 snd_soc_bcm2835_i2s 24576 0 drm_kms_helper 139264 3 vc4 gpu_sched 28672 1 v3d snd_soc_core 172032 4 snd_soc_rpi_wm8804_soundcard,snd_soc_wm8804,vc4, snd_soc_bcm2835_i2s rfkill 24576 3 bluetooth,cfg80211 raspberrypi_hwmon 16384 0 snd_compress 24576 1 snd_soc_core snd_pcm_dmaengine 16384 1 snd_soc_core drm 364544 7 v3d,vc4,gpu_sched,drm_kms_helper snd_pcm 86016 6 snd_soc_wm8804,vc4,snd_pcm_dmaengine,snd_soc_bcm 2835_i2s,snd_bcm2835,snd_soc_core snd_timer 32768 1 snd_pcm bcm2835_isp 28672 0 drm_panel_orientation_quirks 16384 1 drm bcm2835_v4l2 45056 0 bcm2835_codec 32768 0 i2c_bcm2835 16384 0 bcm2835_mmal_vchiq 32768 3 bcm2835_isp,bcm2835_codec,bcm2835_v4l2 snd 61440 5 snd_compress,snd_timer,snd_bcm2835,snd_soc_core, snd_pcm v4l2_mem2mem 24576 1 bcm2835_codec videobuf2_dma_contig 24576 2 bcm2835_isp,bcm2835_codec videobuf2_vmalloc 20480 1 bcm2835_v4l2 videobuf2_memops 20480 2 videobuf2_dma_contig,videobuf2_vmalloc videobuf2_v4l2 24576 4 bcm2835_isp,bcm2835_codec,bcm2835_v4l2,v4l2_mem2 mem syscopyarea 16384 1 drm_kms_helper sysfillrect 16384 1 drm_kms_helper videobuf2_common 49152 5 bcm2835_isp,bcm2835_codec,bcm2835_v4l2,v4l2_mem2 mem,videobuf2_v4l2 sysimgblt 16384 1 drm_kms_helper videodev 200704 6 bcm2835_isp,bcm2835_codec,videobuf2_common,bcm28 35_v4l2,v4l2_mem2mem,videobuf2_v4l2 fb_sys_fops 16384 1 drm_kms_helper vc_sm_cma 40960 2 bcm2835_isp,bcm2835_mmal_vchiq mc 45056 6 bcm2835_isp,bcm2835_codec,videobuf2_common,video dev,v4l2_mem2mem,videobuf2_v4l2 rpivid_mem 16384 0 uio_pdrv_genirq 16384 0 uio 20480 1 uio_pdrv_genirq i2c_dev 24576 0 i2c_bcm2708 16384 0 uinput 20480 0 But still aplay-l doesn't see any card.... Terminal xbian@Cinema4Film ~ $ aplay -l aplay: device_list:272: no soundcards found... ??? |
|||
10th Jan, 2021, 05:56 AM
Post: #3
|
|||
|
|||
RE: hifiberry-digi on pi4 not working.....
No idea!
What else did you do? Fresh install or just move the sc-card from Pi3 to Pi4? |
|||
10th Jan, 2021, 06:04 AM
(This post was last modified: 10th Jan, 2021 06:06 AM by Nachteule.)
Post: #4
|
|||
|
|||
RE: hifiberry-digi on pi4 not working.....
Btw, you have to load the stuff via /boot/config.txt, see https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/
Loading those modules via /etc/modules is obsolete since ages |
|||
10th Jan, 2021, 09:04 PM
Post: #5
|
|||
|
|||
RE: hifiberry-digi on pi4 not working.....
Thanks.
It was a new uSD card with a fresh download install of Xbian for Pi4 dated 01.01.21 I coulnd't get to the wiki page so just did the usual and obviously things have changed. Here is my boot/config.txt Terminal xbian@Cinema4Film ~ $ sudo cat /boot/config.txt [sudo] password for xbian: # ****************************************************************************** # * * # * This file is part of XBian --- Kodi on the Raspberry Pi. * # * Copyright 2019 XBian Team -- http://www.xbian.org - info@xbian.org * # * * # * XBian is free software: you can redistribute it and/or modify it under the * # * terms of the GNU General Public License as published by the Free Software * # * Foundation, either version 3 of the License, or (at your option) any later * # * version. * # * * # * XBian is distributed in the hope that it will be useful, but WITHOUT ANY * # * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS * # * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more * # * details. * # * * # * You should have received a copy of the GNU General Public License along * # * with XBian. If not, see <http://www.gnu.org/licenses/> * # * * # ****************************************************************************** # see /etc/default/xbian-initramfs initramfs initramfs.gz followkernel # ****************************************************************************** # * Memory (System/GPU configuration) * # ****************************************************************************** # SDRAM size based GPU memory split gpu_mem_1024=256 gpu_mem_512=144 gpu_mem_256=100 # Extra 16M memory on Pi2/Pi3/Pi3B+ # See also https://www.raspberrypi.org/forums/viewtopic.php?f=29&t=180420 #total_mem=1024 [pi4] gpu_mem_1024=320 [all] # ****************************************************************************** # * Various settings see also: http://elinux.org/RPi_config.txt * # * to obtain keys visit the shop at http://www.raspberrypi.com * # ****************************************************************************** # Enables turbo mode from boot for the given value in seconds (up to 60) or # until cpufreq sets a frequency. Default 0 initial_turbo=3 # Force HDMI even if unplugged or powered off hdmi_force_hotplug=0 # Pretends HDMI hotplug signal is not asserted so it appears a HDMI display # is not attached. Use composite mode even if HDMI monitor is detected hdmi_ignore_hotplug=0 # Doesn't sent initial active source message. # Avoids bringing CEC (enabled TV) out of standby and channel switch when # rebooting. hdmi_ignore_cec_init=1 # Pretends CEC is not supported at all by TV. No CEC functions will # be supported. hdmi_ignore_cec=1 # Make display smaller to stop text spilling off the screen # see also http://www.raspberrypi.org/phpBB3/viewto...67&t=15700 # overscan_scale=1 disable_overscan=1 # Avoids the rainbow splash screen on boot disable_splash=1 # When adding this line the USB power manager will change its output current # limit (for all 4 USB ports combined) from 600mA to double that, 1200mA. # Obsolete and enabled per default on newer kernels max_usb_current=1 # ****************************************************************************** # * License keys to enable GPU hardware decoding for various codecs * # * to obtain keys visit the shop at http://www.raspberrypi.com * # ****************************************************************************** decode_MPG2=0x00000000 decode_WVC1=0x00000000 # ****************************************************************************** # * Overlays. For more information please read * # * /boot/README.overlays * # ****************************************************************************** # This parameter enables onboard sound via module snd_bcm2835. # Module will be loaded automatically, an entry in # /etc/modules[.xbian] has no effect and is not longer needed/ # necessary with kernel 4.4 and above. # Please note, this setting should be commented out or set to off # if a Hifiberry or any other I2S based sound device is used #dtparam=audio=on # ****************************************************************************** # * GPIO LIRC * # * Please note: * # * GPIO input pin has to be remapped for working together * # * with I2S sound cards, like Hifiberry. For example * # * dtoverlay=lirc-rpi,gpio_in_pin=22,debug for kernels <= 4.14 or * # * dtoverlay=gpio-ir,gpio_pin=22 for kernels >= 4.14 * # ****************************************************************************** #dtoverlay=gpio-ir dtoverlay=lirc-rpi,gpio_out_pin=16,gpio_in_pin=22,debug # ****************************************************************************** # * Hifiberry and compatible sound cards (I2S interface) * # * May conflict with LIRC. See note above * # ****************************************************************************** #dtoverlay=hifiberry-amp #dtoverlay=hifiberry-dac #dtoverlay=hifiberry-dacplus #dtoverlay=hifiberry-digi dtoverlay=i2s=on dtoverlay=hifiberry-digi # ****************************************************************************** # * Raspberry Pi3/Pi3B+ onboard Bluetooth * # ****************************************************************************** [pi3] # This parameter enables usage of miniuart (ttyS0) for BT. # Please note that BT may not work properly if CPUFREQ_GOVERNOR # is set to something else than performance (see also # /etc/default/xbian-module-init-tools). #dtoverlay=pi3-miniuart-bt # Disables onboard Bluetooth #dtoverlay=pi3-disable-bt # ****************************************************************************** # * Raspberry Pi4 * # ****************************************************************************** [pi4] dtoverlay=vc4-fkms-v3d max_framebuffers=2 dtoverlay=pi4-disable-bt dtoverlay=pi4-disable-wifi So I will try again with another fresh install. Do I still need to download alsa-base? alsa-utils? Add info to alsa.conf in etc/alsa? Terminal xbian@Cinema4Film ~ $ sudo apt install alsa-base Reading package lists... Done Building dependency tree Reading state information... Done Package alsa-base is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'alsa-base' has no installation candidate Is there anything else I need to do apart from boot/config.txt? (to get the card recognised. I know what to do in Kodi, unless that too has changed but it looks the same to me). |
|||
10th Jan, 2021, 11:01 PM
Post: #6
|
|||
|
|||
RE: hifiberry-digi on pi4 not working.....
alsa-utils may be useful, can't say if they are required. I assume not
alsa.conf may be useful Don't think that there is anything else you have to do Just give it a try ![]() And, btw, alsa-base is no longer present since debian stretch |
|||
11th Jan, 2021, 02:34 AM
Post: #7
|
|||
|
|||
RE: hifiberry-digi on pi4 not working.....
Thanks and Happy New Year to you!
![]() I have reverted to pi3 and all is well, so not hardware issue in the digi. I will try again with pi4 tomorrow I hope. I have a few more things ro try and hopefully this time I'll get it right! ![]() |
|||
11th Jan, 2021, 07:23 AM
Post: #8
|
|||
|
|||
RE: hifiberry-digi on pi4 not working.....
Fresh download and install.
I only commented out on board audio in config.txt ... #dtparam=audio=on Added dtparam=i2s=on and dtoverlay=hifiberry-digi reboot no sound card found added alsa-utils and created etc/asound/conf added to asound.conf pcm.!default { type hw card 0 } ctl.!default { type hw card 0 } rebooted no sound card found.... ![]() |
|||
11th Jan, 2021, 07:28 AM
Post: #9
|
|||
|
|||
RE: hifiberry-digi on pi4 not working.....
you could put this sd-card into your Pi3 and see what happens ...
|
|||
11th Jan, 2021, 09:20 PM
Post: #10
|
|||
|
|||
RE: hifiberry-digi on pi4 not working.....
(11th Jan, 2021 07:28 AM)Nachteule Wrote: you could put this sd-card into your Pi3 and see what happens ... Did that, same results as on pi4 - no card found. So we have eliminated hardware, it must be something in the pi4 image. ![]() So I tried the pi3 card in the pi 4 and ..... no card found. So ..... pi 3 image works in pi 3 but not pi 4. pi 4 image won't work in pi 3 or pi 4. ![]() ![]() |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread: | Author | Replies | Views: | Last Post | |
How can i get my hifiberry dac+ working with xbian? | Gunnarhaus | 3 | 10,312 |
1st Oct, 2014 07:50 AM Last Post: CurlyMo |