IR remote usb not recognized

[JackLondon]

I have an IR remote of GBS, but it isn't recognized. (This one: http://www.donberg.ie/pics/m/made4you_ki1-1.jpg )
Google doesn't help.

What could I do?

Code:

root@xbian:/home/xbian# /etc/init.d/lirc stop
[ ok ] Stopping remote control daemon(s): LIRC:.
root@xbian:/home/xbian# mode2
mode2: could not get file information for /dev/lirc0
mode2: default_init(): No such file or directory
root@xbian:/home/xbian#

Thank You

[Koenkk]

Can you try this tutorial? http://wiki.xbian.org/view/Tutorials:Configuring_a_remote

[JackLondon]

Thanks for replying.

I tried to configure using that tutorial, but I failed at the first step.
I copied the code up (first post).

[CurlyMo]

Can you post the output of lsusb, dmesg and cat /proc/bus/input/devices?

[JackLondon]

lsusb:

Code:

root@xbian:/home/xbian# lsusb
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 004: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 001 Device 005: ID 046d:c05a Logitech, Inc. Optical Mouse M90
Bus 001 Device 006: ID 16c0:0596 VOTI

cat /proc/bus/input/devices:

Code:

root@xbian:/home/xbian# cat /proc/bus/input/devices
I: Bus=0003 Vendor=046d Product=c05a Version=0111
N: Name="Logitech USB Optical Mouse"
P: Phys=usb-bcm2708_usb-1.3.1/input0
S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/input/input0
U: Uniq=
H: Handlers=mouse0 event0
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
B: MSC=10

[CurlyMo]

Please move the posts to github as our forum rules state. Also, can you just post relevant parts. I don't have to see all your failures in typing commands and stuff.

And can you also post the output as described here: http://forum.xbian.org/thread-414-post-4192.html#pid4192

[JackLondon]

Sorry!

---

All the lines are like this:

Code:

02:00:46 T:2950104128   DEBUG: CecLogMessage - << Recorder 1 (1) -> TV (0): POLL
02:00:46 T:2950104128   DEBUG: CecLogMessage - << 10
02:00:46 T:2950104128   DEBUG: CecLogMessage - command 'POLL' was not acked by the controller
02:00:46 T:2950104128   DEBUG: CecLogMessage - << 10
02:00:46 T:2950104128   DEBUG: CecLogMessage - command 'POLL' was not acked by the controller
02:00:46 T:2950104128   DEBUG: CecLogMessage - >> POLL not sent

[CurlyMo]

So no lines like OnKey?

[JackLondon]

No...

[CurlyMo]

That's wierd because i believe this remove presents itself as a keyboard instead of a remote.

Code:

[    3.277227] hid-generic 0003:16C0:0596.0002: hiddev0,hidraw1: USB HID v1.01 Device [Gbs Elettronica MadeForYou Programmer] on usb-bcm2708_usb-1.3.4/input0

Did you enable debug mode in xbmc while catching the log?

[JackLondon]

Yes...

[CurlyMo]

And if you disable CEC, can you then post a full XBMC log (with debug enabled) and while pressing buttons, on pastebin?

[JackLondon]

You mean disable CEC on tv?
Well, my tv is a bit old and hasn't CEC, so I'm trying to control Xbian with an exclusive IR receptor and remote.....

Is it possible?

[CurlyMo]

Disable cec from within XBMC so it doesn't get polluted with CEC messages.

[JackLondon]

from where?
It's only connected to:

-DVI Monitor (for configuring only, It will be connected to a Tv trough Rca)
-Mouse
-IR receptor
-Ethernet to router