Official CuBox-i XBian 1.0 RC3 Thread

Official CuBox-i XBian 1.0 RC3 Thread - Printable Version

+- Forum (http://forum.xbian.org)
+-- Forum: CuBox-i / Hummingboard (/forum-66.html)
+--- Forum: Test builds (/forum-71.html)
+--- Thread: Official CuBox-i XBian 1.0 RC3 Thread (/thread-2607.html)

Pages: 1 2 3 4 5 6 7

Official CuBox-i XBian 1.0 RC3 Thread - IriDium - 19th Dec, 2014 02:55 AM

This thread is ONLY for Xbian issues resulting from the CuBox-i IMX6 image of Xbian. RC3

Do not post anything here that is related to the Raspberry Pi.

For RC2 use Cubox-i RC2

RE: Official CuBox-i XBian 1.0 RC3 Thread - glennbot - 19th Dec, 2014 06:40 PM

I can't seem to get 5.1/DTS HDMI passthrough working.

The option in the system/audio settings to enable this is now gone?

RE: Official CuBox-i XBian 1.0 RC3 Thread - CurlyMo - 19th Dec, 2014 07:20 PM

I can still select it although i don't have HDMI capable devices.

RE: Official CuBox-i XBian 1.0 RC3 Thread - IriDium - 19th Dec, 2014 10:51 PM

@glennbot It works for me. Are you sure HDMI is selected and not SPIF

RE: Official CuBox-i XBian 1.0 RC3 Thread - menakite - 20th Dec, 2014 05:33 AM

I think you need to increase settings level to "Advanced" or "Expert".

RE: Official CuBox-i XBian 1.0 RC3 Thread - IriDium - 20th Dec, 2014 05:50 AM

(20th Dec, 2014 05:33 AM)menakite Wrote: I think you need to increase settings level to "Advanced" or "Expert".

Good point, however, I have noticed that that option is not available in the default confluence-for-xbian skin but is in the normal confluence.

I have had many problems with that skin, so I think we need to remove it as the default.

RE: Official CuBox-i XBian 1.0 RC3 Thread - glennbot - 20th Dec, 2014 08:23 AM

[Solved]

Change the appearance back to 'Confluence'
You then can select Advanced Settings and make the change.

DTS passthrough on HDMI works perfectly now.

Thanks!

(20th Dec, 2014 05:50 AM)IriDium Wrote:
(20th Dec, 2014 05:33 AM)menakite Wrote: I think you need to increase settings level to "Advanced" or "Expert".
Good point, however, I have noticed that that option is not available in the default confluence-for-xbian skin but is in the normal confluence.

I have had many problems with that skin, so I think we need to remove it as the default.

RE: Official CuBox-i XBian 1.0 RC3 Thread - albrto - 23rd Dec, 2014 07:16 AM

I installed last image on a cubox i4 and i cant use the network. Seems to be down either wired or wireless....

RE: Official CuBox-i XBian 1.0 RC3 Thread - zilexa - 23rd Dec, 2014 07:13 PM

Is upnp working for anyone?

RE: Official CuBox-i XBian 1.0 RC3 Thread - didlich - 27th Dec, 2014 07:01 AM

experienced problems using external usb dvd drive

I checked it with my desktop ubuntu 14.04 box, so hardware is OK

lsusb:

Code:

Bus 002 Device 002: ID 14cd:6600 Super Top USB 2.0 IDE DEVICE

lsmod:

Code:

Module                  Size  Used by

nfsd                  202340  2 

ir_lirc_codec           4536  3 

hci_uart               27573  1 

bluetooth             305937  2 hci_uart

6lowpan_iphc           10491  1 bluetooth

tda10048                9872  1 

tda827x                 9306  2 

brcmfmac              160958  0 

brcmutil                4957  1 brcmfmac

tda10023                5318  1 

cfg80211              184013  1 brcmfmac

rfkill                 13196  2 cfg80211,bluetooth

dvb_usb_ttusb2         15153  42 

dvb_usb                20639  1 dvb_usb_ttusb2

frandom                 4048  4 

f2fs                  100537  0

uname -r:

Code:

3.14.27+

dmesg:

Code:

[  377.289460] usb 2-1: new high-speed USB device number 3 using ci_hdrc

[  377.414919] usb-storage 2-1:1.0: USB Mass Storage device detected

[  377.415065] usb-storage 2-1:1.0: Quirks match for vid 14cd pid 6600: 20

[  377.415110] scsi3 : usb-storage 2-1:1.0

[  378.417460] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H55N 1.00 PQ: 0 ANSI: 0

the strange thing is that there is no mapping to /dev/sd* device

is there something missing in kernel???

RE: Official CuBox-i XBian 1.0 RC3 Thread - IriDium - 28th Dec, 2014 03:13 AM

@albrto I've never experienced any issues with either wlan or eth.
Are you sure they have been set correctly and on the same network?

If you're still having issues can you post the output of dmesg and xbmc.log via pastebin and /etc/network/interfaces directly

(23rd Dec, 2014 07:13 PM)zilexa Wrote: Is upnp working for anyone?

Haven't checked but I do know uPnP is off by default - I guess you have checked.
What sort of error messages do you get - if any.

I guess dmesg and xbmc.log might be useful.

RE: Official CuBox-i XBian 1.0 RC3 Thread - IriDium - 28th Dec, 2014 04:49 AM

@didlich There shouldn't be a problem with any USB devices. Can you post the out\put of dmesg and xbmc.log via pastebin and the output of "df -h" here.

Report any error messages if applicable.

RE: Official CuBox-i XBian 1.0 RC3 Thread - zilexa - 28th Dec, 2014 10:59 PM

Sorry I just noticed I have been posting my major issue (XBMC rebooting every 30-60sec after clean flawless install and upgrade) in the beta2 thread instead of this one. I have a dmesg there but its mostly about CEC.

RE: Official CuBox-i XBian 1.0 RC3 Thread - didlich - 29th Dec, 2014 05:42 AM

@IriDium here it is:

output of dmesg after external dvd dirve switsched on:

Code:

[93438.810823] init: wait-for-state (xbmcxbmc-loaded) main process (24193) killed by TERM signal

[93446.319879] mxc_hdmi 20e0000.hdmi_video: mxc_hdmi_read_edid HDMI in HDMI mode

[93446.319898] mxc_hdmi 20e0000.hdmi_video: same edid

[93513.311564] usb 1-1.3: new high-speed USB device number 90 using ci_hdrc

[93513.396982] usb-storage 1-1.3:1.0: USB Mass Storage device detected

[93513.397183] usb-storage 1-1.3:1.0: Quirks match for vid 14cd pid 6600: 20

[93513.397239] scsi4 : usb-storage 1-1.3:1.0

[93514.399380] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H55N 1.00 PQ: 0 ANSI: 0

after reboot with usb plugged in:
xbmc.log
dmesg

Code:

df -h

Filesystem      Size  Used Avail Use% Mounted on

/dev/mmcblk0p2  7.1G  1.4G  5.7G  20% /

devtmpfs        880M  4.0K  880M   1% /dev

none            202M  320K  202M   1% /run

/dev/mmcblk0p1   33M   19M   13M  60% /boot

/dev/mmcblk0p2  7.1G  1.4G  5.7G  20% /home

/dev/mmcblk0p2  7.1G  1.4G  5.7G  20% /lib/modules

none            4.0K     0  4.0K   0% /sys/fs/cgroup

/dev/sda2       451G  188G  240G  44% /mnt/data

tmpfs           202M     0  202M   0% /run/user/1000

thanks

RE: Official CuBox-i XBian 1.0 RC3 Thread - ramonskie - 29th Dec, 2014 08:55 PM

@zilexa
i had the same issue so i reinstalled the latest image and did not upgrade it
this works but cec still has allot of issues
- can't control volume of receiver
- cec disconnecting allot
- sometimes screen goes black when playing a video and need to restart receiver to show image/sound again (this does not happen with rpi/xbian)

it seems to me that xbian is still not ready for normal use
i always expect some minor bugs but these are pretty big