Does your RPi freeze?

[JD Patxiku]

@mk01

results:

Quote:Testing transfer speed of udp on file 192.168.1.140:/media/d95b2034-7daf-4543-9228-719ade0d652c/nas_servidor/peliculas/300.mkv

mount.nfs: access denied by server while mounting 192.168.1.140:/media/d95b2034-7daf-4543-9228-719ade0d652c/nas_servidor/peliculas
/mnt/test mounted @ rsize (0K), requested rsize (8K)

mount.nfs: access denied by server while mounting 192.168.1.140:/media/d95b2034-7daf-4543-9228-719ade0d652c/nas_servidor/peliculas
/mnt/test mounted @ rsize (0K), requested rsize (16K)

mount.nfs: access denied by server while mounting 192.168.1.140:/media/d95b2034-7daf-4543-9228-719ade0d652c/nas_servidor/peliculas
/mnt/test mounted @ rsize (0K), requested rsize (32K)

mount.nfs: access denied by server while mounting 192.168.1.140:/media/d95b2034-7daf-4543-9228-719ade0d652c/nas_servidor/peliculas
/mnt/test mounted @ rsize (0K), requested rsize (64K)

Server blocking the script?
My export config = all_squash,insecure,sync
working with xbian but not with the script

[mk01]

run the script with root privileges.

either with sudo
or login as root first

[JD Patxiku]

(5th Apr, 2014 07:09 AM)mk01 Wrote:  run the script with root privileges.

either with sudo
or login as root first

Thanks you a lot for taking your time with my problems. I'm not a good with english and you try helping me even if I don't express myself clearly.

I get this (test is umounted):

Quote:/mnt/test mounted @ rsize (8K), requested rsize (8K)

/mnt/test mounted @ rsize (16K), requested rsize (16K)

/mnt/test mounted @ rsize (32K), requested rsize (32K)

/mnt/test mounted @ rsize (32K), requested rsize (64K)

[mk01]

@JD Patxiku

did you also updated "TESTFILE=" parameter in the script ?
it must be path + filename of already existing file on the NFS.

so if you mount into "/mnt/NFS" (as example) and there is file on your NAS under let's say "movies" and file is called movie.avi, then you TESTFILE should be set like this:

Code:

TESTFILE=/mnt/NFS/movies/movie.avi

also pick a filewith size at least 500MB.

[JD Patxiku]

Still getting same result, Could it be a problem of NFS permissions in the side of the Server?

[mailmark]

(3rd Apr, 2014 02:55 PM)mk01 Wrote:  @mailmark

what you can do is (just for testing) remove BT receiver & Wifi and attach just LAN.
second test would be using ANY old shitty SD card (class 4 preferably).

based on that we can try preserve /boot and /lib/modules files from B1.1 and use them with B2+. this should show us what is the problem.

Ok, I re-installed B2 this weekend with the following configurations:
Other SD card (not sure if it was shitty ). 2GB Sandisk => Freeze
Confiuration of network with bluetooth keyboard, unplugged the BT-receiver so only the Wifi remained in the RPi. Rebooted the RPi and started a movie via Yatse. => Freeze

Only test to do is with the cabled LAN. I only have a hdmi connection on the television and a short LAN cable, so I need to move the television. I will try to do this somewhere this week. Other test I'm thinking about is storing and playing a movie from the SD card and detach both the BT and Wifi.


Regards,
Mark

nb. my movies are shared via SMB

[mailmark]

(8th Apr, 2014 03:37 AM)mailmark Wrote:  

(3rd Apr, 2014 02:55 PM)mk01 Wrote:  @mailmark

what you can do is (just for testing) remove BT receiver & Wifi and attach just LAN.
second test would be using ANY old shitty SD card (class 4 preferably).

based on that we can try preserve /boot and /lib/modules files from B1.1 and use them with B2+. this should show us what is the problem.

Ok, I re-installed B2 this weekend with the following configurations:
Other SD card (not sure if it was shitty ). 2GB Sandisk => Freeze
Confiuration of network with bluetooth keyboard, unplugged the BT-receiver so only the Wifi remained in the RPi. Rebooted the RPi and started a movie via Yatse. => Freeze

I used a LAN connection this evening and there were no freezes.

Earlier, while trying to copy a movie via SMB-share to the SD card, this failed as well.

While playing via LAN, the Wifi was up as well, but did not result in a crash. So it seems that when requesting some more from the Wifi connection, the RPi will crash.

Regards,
Mark

[mk01]

@Mark

what is the dongle type ?

[mailmark]

(13th Apr, 2014 08:14 PM)mk01 Wrote:  @Mark

what is the dongle type ?

It is a: Wifi Skylink SL 1504N (RTL8191SU 802.11n)

[comstyle]

My pi is freezing immediately when I switch the source/input of my tv or turn it off (LG 32 LH3000).
It doesn't matter if cec is activated or not.
I played with the peripheral settings and xbian force hdmi settings but the pi still freezes.....
When I switch back to the pi's hdmi input on tv, I see xbian with frozen clock.
By pushing a button (lg remote/yatse) it often starts fast forwarding the notifications at the bottom and shows in a short period of time a notification of what happened since freezing. The clock jumps to the correct time and everything works well again.
(Sometimes I have to pull ac to reboot because yatse and cec don't work/connect)
This problem has started a few weeks ago after updating.

I hope someone got any ideas.
Thx in advance

[belese]

@comstyle
Can you try to disable xbmc dynamic priority.
you can uncheck this in system=>xbian=>xbmc=>dynamic priority (maybe you have to enable advanced setting in preference, don't remember).

[comstyle]

I disabled it but still freezing. Strange.... I've got no idea where this might come from.....

[belese]

did you have reboot between?

[comstyle]

yes I did a few reboots. I can't find something similar when searching with google. really frustrating :/
I'll try to get a log (never done that before xD). maybe that will help.

[belese]

maybe, post the log (dmesg and xbmc.log), i'll take a look.
Check my siganture to know how to do, it's simple ;-)