Problem: Older Pi not booting after new Xbian-Update package installed
|
10th May, 2014, 02:50 AM
Post: #1
|
|||
|
|||
Older Pi not booting after new Xbian-Update package installed
Title says it all... I have the original model B with 256M ram.
All runs fine, but the latest xbian-update package breaks it. after it is installed, reboot the pi, and it sits like it is powered off. power off and on and the console never even starts up, no rainbow flash with power on, no flicker of the green SDcard activity LED, nothing. If I reflash the boot of the SD card with the image I made before the xbian-update, it's fine again. I have tried 3 different SD cards, all with the same result. Any Ideas? |
|||
10th May, 2014, 02:53 AM
Post: #2
|
|||
|
|||
RE: Older Pi not booting after new Xbian-Update package installed
Please post your config.txt
pilight - modular domotica solution
|
|||
10th May, 2014, 03:48 AM
Post: #3
|
|||
|
|||
RE: Older Pi not booting after new Xbian-Update package installed
root@xbian:/boot# more config.txt
initramfs initramfs.gz 0x00a00000 gpu_mem_512=128 gpu_mem_256=100 initial_turbo=0 decode_MPG2=0xxxxxxxxx disable_overscan=1 emmc_pll_core=0 arm_freq=800 core_freq=250 sdram_freq=400 over_voltage=0 |
|||
12th May, 2014, 05:44 AM
Post: #4
|
|||
|
|||
Re: Older Pi not booting after new Xbian-Update package installed
Remove the emmc setting.
pilight - modular domotica solution
|
|||
12th May, 2014, 09:58 AM
Post: #5
|
|||
|
|||
RE: Older Pi not booting after new Xbian-Update package installed
That took care of it. Just re-installed the xbian-update and have rebooted several times. No issues at all
Thanks! |
|||
« Next Oldest | Next Newest »
|