HDMI settings
|
19th Apr, 2013, 03:38 AM
Post: #1
|
|||
|
|||
HDMI settings
I did a fresh install of ver 1.05a and got nothing but a black screen
So, I modified config.txt to be: Hdmi_safe=1 Now it's running, but the picture occupies the middle of the screen with giant, wide, black bars on the right and left. So, what other HDMI settings should I use to get a full HD screen ? Thanks |
|||
19th Apr, 2013, 03:46 AM
Post: #2
|
|||
|
|||
Re: HDMI settings
please read Video section
http://elinux.org/RPiconfig and follow the instructions edit:if you struggle find the solution please report back ~~~~>>>Please always follow rules and read before you post<<<~~~~ |
|||
19th Apr, 2013, 07:20 AM
Post: #3
|
|||
|
|||
RE: HDMI settings
(19th Apr, 2013 03:46 AM)rikardo1979 Wrote: please read Video section Well, I am getting close. Truth be told, the instructions are a bit difficult to decipher. Where I am now is that a group=1 and mode=5 is very close. The picture fills the screen and is pretty sharp. The only problems that I have are that the display spills off the edges of the screen and I don't know what to do. Example in that the home button for XBMC is almost out of reach. It might be another setting that I could use to shrink the display a little bit but I am hoping that you can point me to the correct setting. I read them a bit and they don't give me a clue. So close, so close. Thanks again Oh yeah, before I forget, do the licenses for mpg2 and wvc1 have any effect on watching videos or sound ? I didn't buy them but will,if needed. |
|||
19th Apr, 2013, 07:27 AM
Post: #4
|
|||
|
|||
RE: HDMI settings
look for my post here
also what is your setup ?all the HW in connection chain, your settings in XBMC, config.txt all the info you can provide see my signature ~~~~>>>Please always follow rules and read before you post<<<~~~~ |
|||
« Next Oldest | Next Newest »
|