[freem@n]

(18th Jan, 2014 02:25 AM)IriDium Wrote:  The following packages have been kept back:
xbian-package-xbmc xbian-update
The following packages will be upgraded:
xbian-package-initramfs-tools xbian-package-kernel
xbian-package-upstart-xbmc-bridge xbian-package-xbmc-scripts
xbian-package-zram-swap.

Unsure why xbian-update has been kept back!! That might be the issue.

the only package that has been kept back when I updated today was xbian-package-cec. Every other package including xbian-package-xbmc and xbian-update was updated successfully
I feel kind of sorry if it broke your whole setup, @Smultie

[IriDium]

Let's wait for the sheriff before we jump to conclusions, and get the dang hanging rope out - there are multiple ways to break a camels back - Isn't English cruel (room to swing a cat, badgered to death, stone the crows, flogging a dead horse ......)

I upgraded a test image at around 14:00 GMT and it didn't cause any problems. The jury - or posse - is out.

[crs]

v2 Pi 512, running XBian1.0 B2 since release >
The following packages will be upgraded: ³
³ xbian-package-initramfs-tools xbian-package-kernel ³
³ xbian-package-upstart-xbmc-bridge xbian-package-xbmc ³
³ xbian-package-xbmc-scripts xbian-package-zram-swap xbian-upd ³
³ 7 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. ³
³ Need to get 55.6 MB of archives.
No problems here
V1 Pi 256, running XBian1.0 B2 since release >
The following packages will be upgraded: ³
³ xbian-package-initramfs-tools xbian-package-kernel ³
³ xbian-package-upstart-xbmc-bridge xbian-package-xbmc ³
³ xbian-package-xbmc-scripts xbian-package-zram-swap xbian-upd ³
³ 7 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

PERFECT. Thanks to the XBian crew once again.

[Smultie]

Back on Beta 2 with all updates.
Try to get USB-install up again, gets stuck everytime at 1 minute in:

┌────────────────────────────────────────────────────────────────────────────┐
│ Please wait until OK button appears │
│────────────────────────────────────────────────────────────────────────────│
│ joining genl thread │
│ At subvol @.ro │
│ receiving subvol @.ro uuid=1bba88d6-82ac-4140-bb6d-54f32b99027b, stransid= │
│ BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=1bba88d6-82ac-4140-bb6d-54f32b99027b, s │
│ Delete subvolume '/tmp/btrfs-source/data/@.ro' │
│ Create a snapshot of '/tmp/btrfs-dest/data/@.ro' in '/tmp/btrfs-dest/data/ │
│ Delete subvolume '/tmp/btrfs-dest/data/@.ro' │
│ │
│ ---> DONE COPYING SUB-VOLUME data SNAPSHOT orig_name │
│ FSSync '/tmp/btrfs-dest' │
│ │
│ DONE COPYING SUB-VOLUME data │
│ │
│ Create subvolume '/tmp/btrfs-dest/home' │
│ DEBUG: v = home, s = orig_name │
│ Create a readonly snapshot of '/tmp/btrfs-source/home/@' in '/tmp/btrfs-so │
│ At subvol /tmp/btrfs-source/home/@.ro │
│ At subvol @.ro │
│ receiving subvol @.ro uuid=8fc680ed-cd03-c94d-b1f8-30fcfe3599e9, stransid= │
└────────────────────────────────────────────────────────────────────────────┘

I know this cause I keep a second SSH open with 'top' running. After appr 1 minute the system completely hangs, uptime no longer keeps growing, etc.

[particleman]

(18th Jan, 2014 03:56 AM)Smultie Wrote:  Back on Beta 2 with all updates.
Try to get USB-install up again, gets stuck everytime at 1 minute in:

┌────────────────────────────────────────────────────────────────────────────┐
│ Please wait until OK button appears │
│────────────────────────────────────────────────────────────────────────────│
│ joining genl thread │
│ At subvol @.ro │
│ receiving subvol @.ro uuid=1bba88d6-82ac-4140-bb6d-54f32b99027b, stransid= │
│ BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=1bba88d6-82ac-4140-bb6d-54f32b99027b, s │
│ Delete subvolume '/tmp/btrfs-source/data/@.ro' │
│ Create a snapshot of '/tmp/btrfs-dest/data/@.ro' in '/tmp/btrfs-dest/data/ │
│ Delete subvolume '/tmp/btrfs-dest/data/@.ro' │
│ │
│ ---> DONE COPYING SUB-VOLUME data SNAPSHOT orig_name │
│ FSSync '/tmp/btrfs-dest' │
│ │
│ DONE COPYING SUB-VOLUME data │
│ │
│ Create subvolume '/tmp/btrfs-dest/home' │
│ DEBUG: v = home, s = orig_name │
│ Create a readonly snapshot of '/tmp/btrfs-source/home/@' in '/tmp/btrfs-so │
│ At subvol /tmp/btrfs-source/home/@.ro │
│ At subvol @.ro │
│ receiving subvol @.ro uuid=8fc680ed-cd03-c94d-b1f8-30fcfe3599e9, stransid= │
└────────────────────────────────────────────────────────────────────────────┘

I know this cause I keep a second SSH open with 'top' running. After appr 1 minute the system completely hangs, uptime no longer keeps growing, etc.

Same issue here several pi's. Also I have tried several times to view the Xbian main web page on my eee net-book(works fine on my laptop) I get no top bar so Im unable to navigate to the forum from there. http://i.imgur.com/JVJpg0G.png

[Smultie]

(18th Jan, 2014 10:03 AM)particleman Wrote:  

(18th Jan, 2014 03:56 AM)Smultie Wrote:  Back on Beta 2 with all updates.
Try to get USB-install up again, gets stuck everytime at 1 minute in:

┌────────────────────────────────────────────────────────────────────────────┐
│ Please wait until OK button appears │
│────────────────────────────────────────────────────────────────────────────│
│ joining genl thread │
│ At subvol @.ro │
│ receiving subvol @.ro uuid=1bba88d6-82ac-4140-bb6d-54f32b99027b, stransid= │
│ BTRFS_IOC_SET_RECEIVED_SUBVOL uuid=1bba88d6-82ac-4140-bb6d-54f32b99027b, s │
│ Delete subvolume '/tmp/btrfs-source/data/@.ro' │
│ Create a snapshot of '/tmp/btrfs-dest/data/@.ro' in '/tmp/btrfs-dest/data/ │
│ Delete subvolume '/tmp/btrfs-dest/data/@.ro' │
│ │
│ ---> DONE COPYING SUB-VOLUME data SNAPSHOT orig_name │
│ FSSync '/tmp/btrfs-dest' │
│ │
│ DONE COPYING SUB-VOLUME data │
│ │
│ Create subvolume '/tmp/btrfs-dest/home' │
│ DEBUG: v = home, s = orig_name │
│ Create a readonly snapshot of '/tmp/btrfs-source/home/@' in '/tmp/btrfs-so │
│ At subvol /tmp/btrfs-source/home/@.ro │
│ At subvol @.ro │
│ receiving subvol @.ro uuid=8fc680ed-cd03-c94d-b1f8-30fcfe3599e9, stransid= │
└────────────────────────────────────────────────────────────────────────────┘

I know this cause I keep a second SSH open with 'top' running. After appr 1 minute the system completely hangs, uptime no longer keeps growing, etc.

Same issue here several pi's. Also I have tried several times to view the Xbian main web page on my eee net-book(works fine on my laptop) I get no top bar so Im unable to navigate to the forum from there. http://i.imgur.com/JVJpg0G.png

Good to know I'm not the only one!

[He4dShOt]

Today after dist-upgrade I got xbian-package-vnc-server, but I can't find any way to start it...

[IriDium]

@He4dShOt - ssh xbian-config 3) Services - it should be in there

[mk01]

(18th Jan, 2014 02:13 AM)Smultie Wrote:  Have there been auto-updates today? I come home to a non-responding Pi. Repowering leaves it at the loading screen @ ~10-15%.

XBMC was started or not? (I'm asking because if XBMC is not running, RPI will be asked to restart if needed (actually reboot we be scheduled to 1min after apt/dpkg processes finish). otherwise not. This looks to me like boot freeze)

(and also Splash is "jumping" to 10-15% on one place only - otherwise it is always infinitebar. that place is initramfs phase. unfortunately you reformatted, right? so no logs.)

---

@all

freeze on cloning function is again as last time kernel issue. I'm currently patching & testing new version.

[Smultie]

(19th Jan, 2014 04:15 AM)mk01 Wrote:  

(18th Jan, 2014 02:13 AM)Smultie Wrote:  Have there been auto-updates today? I come home to a non-responding Pi. Repowering leaves it at the loading screen @ ~10-15%.

XBMC was started or not? (I'm asking because if XBMC is not running, RPI will be asked to restart if needed. otherwise not. This looks to me like boot freeze)

(and also Splash is "jumping" to 10-15% on one place only - otherwise it is always infinitebar. that place is initramfs phase. unfortunately you reformatted, right? so no logs.)

---

@all

freeze on cloning function is again as last time kernel issue. I'm currently patching & testing new version.

Yeah, I was in XBMC.

It was indeed stuck at 10-15%. I had to reformat cause I had no way of accessing the device in any way (within my very limited knowledge).

[mk01]

as I posted to another thread, always just check the FAT on windows or linux. rootfs is most of the time intact, only you get black screen - no kernel loaded, nothing. (red led) - but this is related exactly to /boot partition which is easy to restore.

[Smultie]

So next time I encounter the same situation, there's still hope left? Cool, will try that next time! Hopefully I can help trace the problem then!

[sir106]

Since a few days my raspberry freezes reproducable. When im starting backup from the console in xbian-config or via xbian itself after some seconds my pi stops completely.

-audio playing stops
-No more shell access
-gui doesn't respond (remote)

Anybody encountered the same problem?

Running on public beta2 with all updates - tried also on a fresh install with formated sdcard (because of corrupted filesystem)

Could be something with io - yesterday same issue when copying numer of images from nas to local...

Any ideas?

[mk01]

@sir106

yes, looks like we have regression in kernel code again. it was at least once there. yesterday I was merging two months of commits from stable btrfs which are still not in official tree. so far so good but from the last four kernel minor releases I still have bad taste in my mouth.

[sir106]

thanks for your reply. So i will wait some time hoping it will be fixed soo. Xbian is so great - but of this issue, everything works good and getting even better....