Poll: What packages should be included? This poll is closed. |
|||
Tranmission (Compiled with --enabled-lightweight) | 17 | 26.56% | |
SickBeard | 14 | 21.88% | |
Leechr | 0 | 0% | |
SABnzbd | 7 | 10.94% | |
NZBGet | 6 | 9.38% | |
Headphones | 9 | 14.06% | |
Couchpotato | 11 | 17.19% | |
Total | 64 votes | 100% |
* You voted for this item. | [Show Results] |
[Part 1] Download torrent & newsserver package
|
31st Jan, 2013, 06:16 AM
Post: #121
|
|||
|
|||
RE: Download torrent & newsserver package
Hmm, I used the xbian-config to get the entire download package. Initially everything worked just fine. Then after a reboot Sickbeard didn't want to boot. Right now Sabnzbd+ and Tranmission both work just fine.
Sickbeard doesn't want to boot (I checked the /.config/sickbeard/config.ini/ file and it was completely empty. It doesn't boot on RPi reboot or when I use /etc/init.d/sickbeard restart Couchpotato doesn't want to boot either. No errors or anything, but I can't connect and when I restart the service it says it wasn't running. Edit: Might have figured the problem out. When I changed the config of headphones using WinSCP (/home/xbian/.config/headphones/config.ini) I noticed that the HTTP port was wrong. I changed that to 9093. Further inspection of the file showed that there were actually none of my settings in this config file. I don't know if I'm even supposed to change stuff here, but none of my settings that I filled in before could be seen here. Anyway, I did /etc/init.d/headphones restart and I got the following Code: Traceback (most recent call last): Tada. Apparently my SD card is full for whatever reason. It's a bit strange seeing the only things on it are a 4GB movie, a 100mb album, the Xbian install and the download package. I checked with df -h command over SSH and Rootfs and /dev/root both have 28gb used. Very strange. |
|||
31st Jan, 2013, 08:10 AM
Post: #122
|
|||
|
|||
RE: Download torrent & newsserver package
(31st Jan, 2013 05:10 AM)Richdotward Wrote: Thanks all for this great package, the ultimate download system for sure.In the old (and current) download package, all config files reside in /home/xbian/.config Quote:2. I tried to update unrar using this thread but just resulted in making it worse. Sabnzbd now doesnt decompress anything. Unrar -v shows version 0.01. How do i fix.We're replacing SABnzbd with NZBget. That one works with PAR to unrar stuff. Maybe you want to try that. Quote:3. Being new to linux whats the correct way to turn off the pi. I assume just pulling the power wire out is not a good idea ?The last 2 questions are not related to the download package. @Adantech, the best bet is to follow up with the new packages that i'm currently offering for testing. pilight - modular domotica solution
|
|||
31st Jan, 2013, 11:26 AM
Post: #123
|
|||
|
|||
RE: Download torrent & newsserver package
Well, headphones is 'working' again. Fetching artists keeps failing though, but that doesn't really seem to be caused by the package. Couchpotato works fine now. Just one thing that's a bit weird. Sabnzbd+ verifies the files two times before it starts to repair which is a bit weird and takes up quite a bit of time. Any idea what causes this?
Also, I tried installing the sickbeard package on its own, but that didn't work for me. Do I need to delete the other one fist? (I reckon the dpkg -r command was for that, but it didnt find anything) |
|||
31st Jan, 2013, 07:40 PM
Post: #124
|
|||
|
|||
RE: Download torrent & newsserver package
You need to delete the whole download package before you start installing the new versions.
pilight - modular domotica solution
|
|||
31st Jan, 2013, 08:44 PM
Post: #125
|
|||
|
|||
RE: Download torrent & newsserver package
@CurlyMo - haven't had a chance to check, sorry - I'm still using Sickbeard from the all-in-one package. I've been having a few problems with Nzbget going down, I'm going to check this evening if killing the pid brings it back. Was working a treat when it was up though, think it's definitely a better fit for the pi.
|
|||
1st Feb, 2013, 12:10 AM
Post: #126
|
|||
|
|||
RE: Download torrent & newsserver package
I'm having an issue with headphones being unable to scan my music folder. When I kick off the 1st scan of my music directory I'm getting ERROR Cannot read file: messages for every single file.
I figured this could be a permissions problem so I completed a chmod -R 775 over the entire directory but have the same problem. I've updated to the latest version using the built in updater. But still can't successfully scan my music. Example error msg: 2013-01-31 06:54:27 ERROR Cannot read file: /media/Media/music/Tool - Opiate/Tool - 01 - Sweat.mp3 Permissions: drwxrwxr-x 804 xbian xbian 45056 Jan 30 12:31 /media/Media/music Details on running process: xbian 25032 1 26 06:50 ? 00:02:45 /usr/bin/python /home/xbian/headphones/Headphones.py --quiet --daemon --nolaunch --pidfile=/home/xbian/.config/headphones/headphones.pid --datadir=/home/xbian/headphones --config=/home/xbian/.config/headphones/config.ini |
|||
1st Feb, 2013, 07:04 AM
Post: #127
|
|||
|
|||
RE: Download torrent & newsserver package
EDIT: scrap that, its working now
Hi guys, i have a problem, i have a hdd connected to the Pi, EXT4. i can create folder on the drive, and write to it. But sickbeard, transmission, etc. cant seem to be able to write on to it. Like it wont create a folder on the drive. Is there anyway i can change the permissions for these programs? |
|||
2nd Feb, 2013, 10:59 AM
Post: #128
|
|||
|
|||
RE: Download torrent & newsserver package
Hi all,
I've been fiddling about with this for a couple of days now and I finally got everything (sorta) working, that is SAB,Sick and Couch*. Firstly let me just thank you CurlyMo for the excellent package. I didn't know any of this existed until I installed xbian (I tried the other Pi distros and got bored ). Secondly, to get everything (sorta) working, I did the following: ****************** exactly what it says in the OP ****************** No seriously, before I read this thread, I installed the package using the config wizard in Putty and things never worked properly. So I spent the best part of 2 days messing about getting nowhere fast, so I decided to go for a complete reinstall and started again. This time I formatted, installed xbian and went through post number 1 to the letter. Including both PS's. The only config file changes I made were to the autoProcessTV.cfg file.So far so good. So I've got SAB and Sick working fine together but the one problem I've got is with Couchpotato; firstly it's so slow to update/search and although the couchpotato.log says it's found items, it doesn't show up in the program. Well it finds what I'm searching for but it doesn't find any copies of it on Torrent/NZB, so there's nothing to download . I don't think this is mentioned anywhere and I've probably got something simple wrong but any help would be appreciated. Props again. CW |
|||
2nd Feb, 2013, 09:25 PM
Post: #129
|
|||
|
|||
RE: Download torrent & newsserver package
(30th Jan, 2013 06:49 PM)angriest Wrote: In order to get nzbget to automatically unrar files, you'll need to I got nzbget downloading, but the unrar/post-processing does not work yet. I tried: Code: sudo cp /usr/local/share/nzbget/nzbget-postprocess.conf /usr/local/etc/nzbget/ But this results in the following error: Code: root@xbian:/usr/local/share/nzbget# sudo cp /usr/local/share/nzbget/nzbget-postprocess.conf /usr/local/etc/nzbget/ Any suggestions? |
|||
2nd Feb, 2013, 09:28 PM
Post: #130
|
|||
|
|||
RE: Download torrent & newsserver package
My latest nzbget package has the postprocessing settings already included and configured (as described by angriest) so it should work...
pilight - modular domotica solution
|
|||
2nd Feb, 2013, 09:37 PM
Post: #131
|
|||
|
|||
RE: Download torrent & newsserver package
(2nd Feb, 2013 09:28 PM)CurlyMo Wrote: My latest nzbget package has the postprocessing settings already included and configured (as described by angriest) so it should work... Hi CurlyMo. Thanks for your response. I read that you did, but unfortunately at my end, the post-processing does not work yet. In nzb-get I get the following warning... Maybe that gives you any ideas? Code: Loading configuration of post-processing script failed |
|||
2nd Feb, 2013, 09:44 PM
Post: #132
|
|||
|
|||
RE: Download torrent & newsserver package
I've updated the package in which the post-processing file is places in the webui directory. Can you try if this worked?
pilight - modular domotica solution
|
|||
2nd Feb, 2013, 10:00 PM
Post: #133
|
|||
|
|||
RE: Download torrent & newsserver package
I would like to try. Do I need to reinstall nzbget totally?
|
|||
2nd Feb, 2013, 10:01 PM
Post: #134
|
|||
|
|||
RE: Download torrent & newsserver package
Just make a backup of your current configuration file and then rerun the instructions from here: http://forum.xbian.org/thread-196-post-3373.html#pid3373
pilight - modular domotica solution
|
|||
2nd Feb, 2013, 10:10 PM
Post: #135
|
|||
|
|||
RE: Download torrent & newsserver package
Getting error after error. Maybe you can use it...
Code: root@xbian:/home/xbian# cd /home/xbian/ |
|||
« Next Oldest | Next Newest »
|