XBian Release Candidate 3
|
14th Sep, 2014, 10:35 PM
Post: #91
|
|||
|
|||
RE: XBian Release Candidate 3
The 2 mount errors are really only warnings and can be safely ignored.
As for the DNS errors, check your Internet connection and/or the network configuration on the Raspberry Pi. I'm able to resolve sverigesradio.se (134.25.4.140). Google is used to check if the device can access the Internet, in the "System Info" window - it's possible that it tries to check if Google is reachable if a DNS request (the one for sverigesradio.se) fails too. |
|||
15th Sep, 2014, 04:08 AM
Post: #92
|
|||
|
|||
RE: XBian Release Candidate 3
Thanks for the extra info!
As it happens, about an hour later the internet went down and stayed down for about 5 hours! (nightmare!)..... But before it did I managed to update and upgrade the few bits that were offered for that pi and I will test it out tomorrow again. Looks like it might have been a fault with the BT (British Telecom) broadband. Thanks. Skywatch |
|||
16th Sep, 2014, 03:05 AM
Post: #93
|
|||
|
|||
RE: XBian Release Candidate 3
CEC stuff anyone? or is it just me?
|
|||
18th Sep, 2014, 05:51 AM
Post: #94
|
|||
|
|||
RE: XBian Release Candidate 3
I updated my xbian today and saw "updating to 1.0RC3".
I have also read a lot that everyones says to stick with RC2, so I'm wondering if there is any way to downgrade to RC2? Searced but couldn't find aynthing |
|||
18th Sep, 2014, 05:56 AM
Post: #95
|
|||
|
|||
RE: XBian Release Candidate 3
Revert your snapshots.
pilight - modular domotica solution
|
|||
24th Sep, 2014, 07:01 PM
Post: #96
|
|||
|
|||
RE: XBian Release Candidate 3
(16th Sep, 2014 03:05 AM)nsviper Wrote: CEC stuff anyone? or is it just me?yup, the CEC doesn't work anymore and also video refresh rates(Adjust display refresh rate to match video) doesn't work either on RC builds ~~~~>>>Please always follow rules and read before you post<<<~~~~ |
|||
24th Sep, 2014, 08:25 PM
Post: #97
|
|||
|
|||
RE: XBian Release Candidate 3
(24th Sep, 2014 07:01 PM)rikardo1979 Wrote:(16th Sep, 2014 03:05 AM)nsviper Wrote: CEC stuff anyone? or is it just me?yup, the CEC doesn't work anymore and also video refresh rates(Adjust display refresh rate to match video) doesn't work either on RC builds No problem here. Lastest xbian_package_xbmc is looping though: Preparing to replace xbian-package-xbmc 13.2-RLS-1411544010 (using .../xbian-package-xbmc_13.2-RLS-1411544010_armhf.deb) ... |
|||
24th Sep, 2014, 09:04 PM
Post: #98
|
|||
|
|||
RE: XBian Release Candidate 3
I'm on RC3 and today I wanted to upgrade a few packages, but it fails on btrf snapshoot.
Terminal root@xbian:/etc# cat /etc/xbian_version 1.0RC3 root@xbian:/etc# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: xbian-package-config-shell xbian-package-initramfs-tools xbian-package-xbmc xbian-update 4 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/30.6 MB of archives. After this operation, 479 kB disk space will be freed. Do you want to continue [Y/n]? y /usr/sbin/btrfs-auto-snapshot: line 456: 100 - (mdu*100 / mdt) : division by 0 (error token is ") ") Error: root is not existing volume. /usr/sbin/btrfs-auto-snapshot: line 1: 2434 Segmentation fault exit 138 E: Problem executing scripts DPkg::Pre-Invoke '[ ! -e /etc/default/xbian-snap ] || . /etc/default/xbian-snap; [ $ENABLEDAPT = yes ] || exit 0; z=$(findmnt -n /| awk '{print $2}'); z=${z#*\[\/}; export z=${z%%\/*}; if [ -x /usr/sbin/btrfs-auto-snapshot ]; then bt rfs-auto-snapshot snapshot -k $KEEPAPT -l apt-run $z ; fi ;' E: Sub-process returned an error code root@xbian:/etc# Setup is running on a model B. |
|||
24th Sep, 2014, 09:32 PM
Post: #99
|
|||
|
|||
RE: XBian Release Candidate 3
(24th Sep, 2014 07:01 PM)rikardo1979 Wrote:(16th Sep, 2014 03:05 AM)nsviper Wrote: CEC stuff anyone? or is it just me?yup, the CEC doesn't work anymore and also video refresh rates(Adjust display refresh rate to match video) doesn't work either on RC builds Thanks for the update, I'll keep an eye open for future fixes everything else is fine, so using android remote for now is good. |
|||
24th Sep, 2014, 11:36 PM
Post: #100
|
|||
|
|||
RE: XBian Release Candidate 3
Unpacking replacement xbian-package-kernel ... │
│ dpkg: error processing /var/cache/apt/archives/xbian-package-k │ │ trying to overwrite '/lib/firmware/htc_9271.fw', which is als │ │ dpkg-deb: error: subprocess paste was killed by signal (Broken │ │ Errors were encountered while processing: │ │ /var/cache/apt/archives/xbian-package-kernel_3.12.26+-1407563 │ │ E: Sub-process /usr/bin/dpkg returned an error code (1) So my RC update looks smooth this am, but the Kernel upgrade is a no go. I SSH in (v1 & v2 Pi) su - xbian & run updates every few days. Will try it from command line after work. Have a great day & XBian team, awesome work! |
|||
24th Sep, 2014, 11:39 PM
(This post was last modified: 24th Sep, 2014 11:41 PM by rikardo1979.)
Post: #101
|
|||
|
|||
RE: XBian Release Candidate 3
(24th Sep, 2014 09:32 PM)nsviper Wrote:(24th Sep, 2014 07:01 PM)rikardo1979 Wrote:(16th Sep, 2014 03:05 AM)nsviper Wrote: CEC stuff anyone? or is it just me?yup, the CEC doesn't work anymore and also video refresh rates(Adjust display refresh rate to match video) doesn't work either on RC builds unfortunately I have tested different distro and there is no problem what so ever with CEC or switching between refresh rates. so this is XBian related Hope guys going to fix this weird issues soon ~~~~>>>Please always follow rules and read before you post<<<~~~~ |
|||
25th Sep, 2014, 06:11 PM
Post: #102
|
|||
|
|||
RE: XBian Release Candidate 3
[Post has been moved.]
AS IT COULD GET A BIT CONFUSING HERE, I MOVED MY SPECIFIC PROBLEM TO: http://forum.xbian.org/thread-2265-post-24515.html My setup: Software: XBian version: 1.0RC3 | XBMC version: 13.2 (Gotham) | Overclock settings: High Hardware: RPi model: B | Power: DUB-H7 | SD: Tanscend Class 10 | Network: Wireless |
|||
26th Sep, 2014, 02:07 AM
Post: #103
|
|||
|
|||
RE: XBian Release Candidate 3
A new RC3 image has been uploaded that should fix (most) issues.
pilight - modular domotica solution
|
|||
26th Sep, 2014, 07:47 PM
Post: #104
|
|||
|
|||
RE: XBian Release Candidate 3
The current RC3 is absolutely amazing! My RPi was never like that incredibly responsive before.
Absolutely fast, smooth and stable for me right now. Great work! PS: Inside xbian-config's XBMC GUI there is a typo: "VNC Serveur" -> "VNC Server" My setup: Software: XBian version: 1.0RC3 | XBMC version: 13.2 (Gotham) | Overclock settings: High Hardware: RPi model: B | Power: DUB-H7 | SD: Tanscend Class 10 | Network: Wireless |
|||
26th Sep, 2014, 07:49 PM
Post: #105
|
|||
|
|||
RE: XBian Release Candidate 3
@josch, can you create a github issue about it?
pilight - modular domotica solution
|
|||
« Next Oldest | Next Newest »
|