[yishay]

(29th Dec, 2014 08:55 PM)ramonskie Wrote:  @zilexa
i had the same issue so i reinstalled the latest image and did not upgrade it
this works but cec still has allot of issues
- can't control volume of receiver
- cec disconnecting allot
- sometimes screen goes black when playing a video and need to restart receiver to show image/sound again (this does not happen with rpi/xbian)

it seems to me that xbian is still not ready for normal use
i always expect some minor bugs but these are pretty big

Hello
I've installed latest version (2015-03-21)
It constantly reboots.

[djbijo]

(22nd Mar, 2015 04:49 PM)yishay Wrote:  

(29th Dec, 2014 08:55 PM)ramonskie Wrote:  @zilexa
i had the same issue so i reinstalled the latest image and did not upgrade it
this works but cec still has allot of issues
- can't control volume of receiver
- cec disconnecting allot
- sometimes screen goes black when playing a video and need to restart receiver to show image/sound again (this does not happen with rpi/xbian)

it seems to me that xbian is still not ready for normal use
i always expect some minor bugs but these are pretty big

Hello
I've installed latest version (2015-03-21)
It constantly reboots.

for me it's working really well.
did you restore kodi?
try a clean install

[yishay]

(24th Mar, 2015 02:37 AM)djbijo Wrote:  

(22nd Mar, 2015 04:49 PM)yishay Wrote:  

(29th Dec, 2014 08:55 PM)ramonskie Wrote:  @zilexa
i had the same issue so i reinstalled the latest image and did not upgrade it
this works but cec still has allot of issues
- can't control volume of receiver
- cec disconnecting allot
- sometimes screen goes black when playing a video and need to restart receiver to show image/sound again (this does not happen with rpi/xbian)

it seems to me that xbian is still not ready for normal use
i always expect some minor bugs but these are pretty big

Hello
I've installed latest version (2015-03-21)
It constantly reboots.

for me it's working really well.
did you restore kodi?
try a clean install

I used Xbian installer which formats the microsd before writing the image.

---

(24th Mar, 2015 02:37 AM)djbijo Wrote:  

(22nd Mar, 2015 04:49 PM)yishay Wrote:  

(29th Dec, 2014 08:55 PM)ramonskie Wrote:  @zilexa
i had the same issue so i reinstalled the latest image and did not upgrade it
this works but cec still has allot of issues
- can't control volume of receiver
- cec disconnecting allot
- sometimes screen goes black when playing a video and need to restart receiver to show image/sound again (this does not happen with rpi/xbian)

it seems to me that xbian is still not ready for normal use
i always expect some minor bugs but these are pretty big

Hello
I've installed latest version (2015-03-21)
It constantly reboots.

for me it's working really well.
did you restore kodi?
try a clean install

I used Xbian installer which formats the microsd before writing the image.

[ramonskie]

i did a apt-get upgrade
and after this xbmc won't start

i get the following error
20:32:15 T:1951281152 ERROR: DBus: Error org.freedesktop.UDisks.Error.Failed - Error mounting: mount exited with exit code 1: helper failed with:
mount: only root can mount /dev/root on /home
20:32:15 T:1951281152 NOTICE: XBian: splash black
20:32:16 T:1951281152 NOTICE: InitWindowSystem: Using EGL Implementation: iMX

after this xbmc service dies

[rooomka]

(27th Mar, 2015 05:38 AM)ramonskie Wrote:  i did a apt-get upgrade
and after this xbmc won't start

i get the following error
20:32:15 T:1951281152 ERROR: DBus: Error org.freedesktop.UDisks.Error.Failed - Error mounting: mount exited with exit code 1: helper failed with:
mount: only root can mount /dev/root on /home
20:32:15 T:1951281152 NOTICE: XBian: splash black
20:32:16 T:1951281152 NOTICE: InitWindowSystem: Using EGL Implementation: iMX

after this xbmc service dies

I am having the same issues.

after upgrade, kodi does not work, everything else works fine, here some infos:

dmesg:
http://pastebin.com/UQJ2uW6z

kodi.log:
http://pastebin.com/CuXbarDT

apt history
http://pastebin.com/TNa2vfVb

upstart-ev.log
http://pastebin.com/WQvuwBAy

[trasgon]

(29th Mar, 2015 07:57 AM)rooomka Wrote:  

(27th Mar, 2015 05:38 AM)ramonskie Wrote:  i did a apt-get upgrade
and after this xbmc won't start

i get the following error
20:32:15 T:1951281152 ERROR: DBus: Error org.freedesktop.UDisks.Error.Failed - Error mounting: mount exited with exit code 1: helper failed with:
mount: only root can mount /dev/root on /home
20:32:15 T:1951281152 NOTICE: XBian: splash black
20:32:16 T:1951281152 NOTICE: InitWindowSystem: Using EGL Implementation: iMX

after this xbmc service dies

I am having the same issues.

after upgrade, kodi does not work, everything else works fine, here some infos:

dmesg:
http://pastebin.com/UQJ2uW6z

kodi.log:
http://pastebin.com/CuXbarDT

apt history
http://pastebin.com/TNa2vfVb

upstart-ev.log
http://pastebin.com/WQvuwBAy

I am having the same issues. Have you found any solution?

[IriDium]

Status of available images from Xbian-installer

Xbian 2015.04.25.imx6 - Appears to work - Confluence skin

However, that was on a 2Gb SD card.

When installed onto a 4Gb SD card it crashes to #
Waiting for root.
modprobe: Can't change directory to 3.19.3+

Xbian 2015.04.18.imx6 - Appears to work. Xbian skin
Xbian 2015.04.11.imx6 - Appears to work. Xbian skin
Xbian 2015.04.04.imx6 - Crash to login prompt
Xbian 2015.03.31.imx6 - Does not boot. xbianboot empty.

Stable - Kodi Xbian-config not working - Gets to 25% then stops

[zilexa]

ahh too bad! I was away for a while, busy with personal life (good stuff) and work. The gf and I used Openelec for watching tvshows etc. But now I am really in need of XBian on my CuboxTV since I need my personal cloud setup again (its gonna be Owncloud + Syncthing this time).

I'm a bit disappointed in buying a CuboxTV since there is no good, stable OS with Kodi to install that allows to install other apps like Owncloud, Syncthing, Flexget. OpenElec is the only rockstable Kodi OS for Cubox atm.
What can we non-developers do to get a stable working XBian release for I.MX6? I already donated.

[didlich]

Hi all,

I really like xbian on my cubox, except of the stability problems.
There is another distribution for cubox will be realeased soon, called OSMC, which looks also promising, but I hope for xbian the stability problems will be solved.

I'am with you @zilexa and would like to support the xbian imx6 team too, to make the xbian for cubox stable. Where is the donate "button" and how can I help the xbian imx6 guys?

---

OK, donate is done.

[CurlyMo]

@didlich, Did you post your issues on github already?

[didlich]

@CurlyMo, not yet

until now I posted the issues in this forum, I guess the github repository is:
https://github.com/xbianonpi/xbian

I would like to test the latest version. In the case the latest version has unacceptable bugs, I would like to rollback without loosing my settings. Which work-flow would you recommend (SD-Card backup etc.)?

[eggeh1982]

(27th Apr, 2015 06:45 PM)IriDium Wrote:  Status of available images from Xbian-installer

Xbian 2015.04.25.imx6 - Appears to work - Confluence skin

However, that was on a 2Gb SD card.

When installed onto a 4Gb SD card it crashes to #
Waiting for root.
modprobe: Can't change directory to 3.19.3+

Im getting this from latest all the way back to 2015.04.04, on two different Cards a 32Gb Samsung Evo and an 8GB one i got from SolidRun with the Cubox. The Stable one worked but its disappeared off the installer

[IriDium]

(27th Apr, 2015 06:45 PM)IriDium Wrote:  Status of available images from Xbian-installer

Xbian 2015.04.25.imx6 - Appears to work - Confluence skin

However, that was on a 2Gb SD card.

When installed onto a 4Gb SD card it crashes to #
Waiting for root.
modprobe: Can't change directory to 3.19.3+

Xbian 2015.04.18.imx6 - Appears to work. Xbian skin
Xbian 2015.04.11.imx6 - Appears to work. Xbian skin
Xbian 2015.04.04.imx6 - Crash to login prompt
Xbian 2015.03.31.imx6 - Does not boot. xbianboot empty.

Stable - Kodi Xbian-config not working - Gets to 25% then stops

How Odd. I tried again using the latest Xbian 2015.04.25.imx6 release on a *New* 4G class 4 SD card and it worked. I then tried it on the a 4G class 10 as before and it failed. I've tested the class 10 with F3 and Badblocks with no errors reported. So at a loss what the issue is. Class 10 works Ok on RPi 2

However, with the working system, I upgraded without issues!!!

Now with a fully upgraded system, I can see what is amiss.

1) Xbian-upstart-bridge fails with a script error.

[Exnor]

A little of topic and i apologize but i'm thinking to get a Cubox... and the price on the TV vs i2Pro models is kinda of interesting.... which one should i buy? The TV model only has 1GiB of RAM but the rest appears to be the same (SoC, etc...)

Specs: http://www.solid-run.com/products/cubox-i-mini-computer/cubox-i-specifications/

[IriDium]

@Exnor not too sure of the difference in price, but I always go for the best, if I can afford it.

However, using an I4Pro for just Xbian, I never need anywhere near the 2G Ram, nor the 4 CPU's, so I reckon the cheapest will do as a basic box. I've never seen a need for the extra 1G Ram (Normal usage is around 400M).

The only thing I wish it had was Wireless 5Ghz - not sure if the newer model has this support built in yet. Also, it won't play H265 without a bit of stutter and all 4 cores at max.

Mind you the TV model doesn't have wifi nor bluetooth.

I'd also check if any models have USB3, if not look at a model with eSata if you need that extra speed.

The biggest bottleneck is the I/O on the SD card, not the Cubox.