Official CuBox-i XBian 1.0 RC3 Thread
|
15th May, 2015, 01:03 AM
Post: #76
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
(14th May, 2015 06:48 PM)IriDium Wrote: @Exnor not too sure of the difference in price, but I always go for the best, if I can afford it. Thanks for the input mate. Wifi is not a dealbreaker for me since (and you can see on the photos section, my current setup) i use cabled LAN. The eSATA would be nice, but does the unit boots from the SATA controller? Oh and i was not expecting H265 decoding lool. i just want something with more "juice" than my rPi model 1 B... I still plan to go with Xbian and just to HTPC usage. No torrents or other programs running, just the OS, Kodi and necessary services like in the Pi. I expect that the GUI performance is better than on the rPi (is it?) and it can decode higher bitrates (AVC) with better performance. :) :) |
|||
15th May, 2015, 08:46 PM
Post: #77
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
@Exnor - You could always try an RPi2 - It has the CPU and RAM to run Xbian very nicely. The Cubox has advantages. powered USB, is smaller and is much slicker on the menus.
No idea about the eSata boot - my next project. I've have managed to boot from an external SDD via USB Please read before you post How to post a log file If you liked my help, click on "Thanks" to show your appreciation.
|
|||
18th May, 2015, 02:46 AM
Post: #78
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
(15th May, 2015 08:46 PM)IriDium Wrote: @Exnor - You could always try an RPi2 - It has the CPU and RAM to run Xbian very nicely. The Cubox has advantages. powered USB, is smaller and is much slicker on the menus. Yes i was considering the Pi2 also, but the unit + case is almost as expensive as the full Cubox kit where i live... Is the current distro stable for the Pi2? :) :) |
|||
18th May, 2015, 06:49 AM
Post: #79
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
Yes it is.
pilight - modular domotica solution
|
|||
18th May, 2015, 11:29 PM
Post: #80
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
:) :) |
|||
21st May, 2015, 07:16 AM
Post: #81
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
@IriDium, I have the same issues installing XBian_2015.05.16_imx6.img.gz on a SanDisk Extreme Pro 8GB Class 1 SDHC, but also with SanDisk 2 GB
I used now XBian_2015.04.25_imx6.img, which works on SanDisk 2 GB, but not on SanDisk Extreme Pro 8GB Class 1 SDHC |
|||
25th May, 2015, 07:47 PM
Post: #82
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
(1st May, 2015 10:02 PM)CurlyMo Wrote: @didlich, Did you post your issues on github already? @CurlyMo, I just created a new bug report, not sure if that was the hold up to fix the boot issues. Is it an idea to team up with OpenElec or with the guy from GeeXBox to figure out why this is happening? I do not have 2 or 4 GB sd cards, only 8 and it does not make sense to me that I cannot use XBian because my card is 'too big'. @didlich, if you have the ability to post some logfiles in the issue would be appreciated: https://github.com/xbianonpi/xbian/issues/730 |
|||
11th Jun, 2015, 06:17 AM
Post: #83
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
I had spare time so I got a secondary 8GB microSD and downloaded the latest image XBian_2015.06.06_imx6 and inserted it in the Cubox i4-Pro. Thats all I did.
Result (on the tv): and I cannot SSH. It really does not make sense, to release new images weekly without verifying them first. When a release at least boots, you can release it. But if any release afterwards does not boot, don't put it online. No other open source project that I know of releases new images for weeks and weeks while none of the images actually boot. I understand they are automatically generated, which costs energy and resources and both are wasted. Perhaps but the generation of the imx.6 builds on hold. |
|||
11th Jun, 2015, 07:00 AM
Post: #84
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
Please report on github.
pilight - modular domotica solution
|
|||
12th Jun, 2015, 04:42 AM
Post: #85
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
I have updated https://github.com/xbianonpi/xbian/issues/730
|
|||
17th Jun, 2015, 12:45 PM
Post: #86
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
Latest image works on micro sd kingston 8gb class 4, it doesn't work on sandisk ultra micro sd hc class 10 8gb
|
|||
18th Jun, 2015, 06:29 PM
Post: #87
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
I can confirm, Sandisk Utra class 10 microSDHC with a little "I" mark on it doesn't work.
Transcend 8GB microSDHC class 6 does work!! The Sandisk is 7.39GB, the Transcend is 7.46GB. |
|||
18th Jun, 2015, 09:59 PM
Post: #88
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
Unfortunately playback is not what it should be
https://github.com/xbianonpi/xbian/issues/739
|
|||
19th Jun, 2015, 03:18 AM
Post: #89
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
(18th Jun, 2015 09:59 PM)zilexa Wrote: Unfortunately playback is not what it should be Nvm me.... |
|||
19th Jun, 2015, 10:01 AM
Post: #90
|
|||
|
|||
RE: Official CuBox-i XBian 1.0 RC3 Thread
My hdd esata is mounted by xbian plug and play.
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread: | Author | Replies | Views: | Last Post | |
Official CuBox-i XBian 1.0 Beta 2 thread | IriDium | 184 | 590,119 |
20th Nov, 2015 10:43 PM Last Post: evianway123 |